HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10.00
Non-alloy pig iron containing by weight 0.5 % or less of phosphorus
7201.20.00
Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
7201.50.00
Alloy pig iron; spiegeleisen
7202
Ferro-alloys
Show details
7202.1
Ferro-manganese
7202.11.00
Containing by weight more than 2 % of carbon
7202.19.00
Other
7202.2
Ferro-silicon
7202.21.00
Containing by weight more than 55 % of silicon
7202.29.00
Other
7202.30.00
Ferro-silico-manganese
7202.4
Ferro-chromium
7202.41.00
Containing by weight more than 4 % of carbon
7202.49.00
Other
7202.50.00
Ferro-silico-chromium
7202.60.00
Ferro-nickel
7202.70.00
Ferro-molybdenum
7202.80.00
Ferro-tungsten and ferro-silico-tungsten
7202.9
Other
7202.91.00
Ferro-titanium and ferro-silico-titanium
7202.92.00
Ferro-vanadium
7202.93.00
Ferro-niobium
7202.99
Others
7202.99.10
Ferro-phosphorus
7202.99.90
Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
Show details
7203.10.00
Ferrous products obtained by direct reduction of iron ore
7203.90.00
Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
7204.10.00
Waste and scrap of cast iron
7204.2
Waste and scrap of alloy steel
7204.21.00
Of stainless steel
7204.29.00
Other
7204.30.00
Waste and scrap of tinned iron or steel
7204.4
Other waste and scrap
7204.41.00
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49.00
Other
7204.50.00
Remelting scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.00
Granules
7205.2
Powders
7205.21.00
Of alloy steel
7205.29
Others
7205.29.10
Of sponge iron, containing 98% or more by weight of iron
7205.29.20
Of iron, covered by a thermoplastic resin, containing 98% or more by weight of iron
7205.29.90
Other
7206
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
Show details
7206.10.00
Ingots
7206.90.00
Other
7207
Semi-finished products of iron or non-alloy steel
Show details
7207.1
Containing by weight less than 0.25 % of carbon
7207.11
Of rectangular (including square) cross section, the width measuring less than twice the thickness
7207.11.10
Billets
7207.11.90
Other
7207.12.00
Other, of rectangular (other than square) cross-section
7207.19.00
Other
7207.20.00
Containing by weight 0.25 % or more of carbon
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10.00
In coils, not further worked than hot-rolled, with patterns in relief
7208.2
Other, in coils, not further worked than hot-rolled, pickled
7208.25.00
Of a thickness of 4.75 mm or more
7208.26
Of a thickness of 3 mm or more but less than 4.75 mm
7208.26.10
Having a minimum yield point of 355 mpa or more
7208.26.90
Other
7208.27
Of a thickness of less than 3 mm
7208.27.10
Having a minimum yield point of 275 mpa or more
7208.27.90
Other
7208.3
Other, in coils, not further worked than hot-rolled
7208.36
Of a thickness exceeding 10 mm
7208.36.10
Having a minimum yield point of 355 mpa or more
7208.36.90
Other
7208.37.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.38
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.10
Having a minimum yield point of 355 mpa or more
7208.38.90
Other
7208.39
Of a thickness of less than 3 mm
7208.39.10
Having a minimum yield point of 275 mpa or more
7208.39.90
Other
7208.40.00
Not in coils, not further worked than hot-rolled, with patterns in relief
7208.5
Other, not in coils, not further worked than hot-rolled
7208.51.00
Of a thickness exceeding 10 mm
7208.52.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.53.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.54.00
Of a thickness of less than 3 mm
7208.90.00
Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Show details
7209.1
In coils, not further worked than cold-rolled (cold-reduced)
7209.15.00
Of a thickness of 3 mm or more
7209.16.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.17.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.18.00
Of a thickness of less than 0.5 mm
7209.2
Not in coils, not further worked than cold-rolled (cold-reduced)
7209.25.00
Of a thickness of 3 mm or more
7209.26.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.27.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.28.00
Of a thickness of less than 0.5 mm
7209.90.00
Other
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
Show details
7210.1
Plated or coated with tin
7210.11.00
Of a thickness of 0.5 mm or more
7210.12.00
Of a thickness of less than 0.5 mm
7210.20.00
Plated or coated with lead, including terne-plate
7210.30
Electrolytically plated or coated with zinc
7210.30.10
Of a thickness of less than 4.75 mm
7210.30.90
Other
7210.4
Otherwise plated or coated with zinc
7210.41
Corrugated
7210.41.10
Of a thickness of less than 4.75 mm
7210.41.90
Other
7210.49
Others
7210.49.10
Of a thickness of less than 4.75 mm
7210.49.90
Other
7210.50.00
Plated or coated with chromium oxides or with chromium and chromium oxides
7210.6
Plated or coated with aluminium
7210.61.00
Plated or coated with aluminium-zinc alloys
7210.69
Others
7210.69.1
Coated with aluminous silicon alloys
7210.69.11
Weighing not less than 120 g/m2 and with a silicon content by weight of not less than 5% but not more than 11%
7210.69.19
Other
7210.69.90
Other
7210.70
Painted, varnished or coated with plastics
7210.70.10
Painted or varnished
7210.70.20
Coated with plastics
7210.90.00
Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.1
Not further worked than hot-rolled
7211.13.00
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211.14.00
Other, of a thickness of 4.75 mm or more
7211.19.00
Other
7211.2
Not further worked than cold-rolled (cold-reduced)
7211.23.00
Containing by weight less than 0.25 % of carbon
7211.29
Others
7211.29.10
Containing by weight 0,25% or more but less than 0,6% of carbon
7211.29.20
Containing by weight 0,6% or more of carbon
7211.90
Other
7211.90.10
Containing by weight 0,6% or more of carbon
7211.90.90
Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
Show details
7212.10.00
Plated or coated with tin
7212.20
Electrolytically plated or coated with zinc
7212.20.10
Of a thickness of less than 4.75 mm
7212.20.90
Other
7212.30.00
Otherwise plated or coated with zinc
7212.40
Painted, varnished or coated with plastics
7212.40.10
Painted or varnished
7212.40.2
Coated with plastics
7212.40.21
With an intermediate layer of copper-tin alloys or copper-tin-lead alloys, applied by synterization
7212.40.29
Other
7212.50
Otherwise plated or coated
7212.50.10
With a layer of copper-tin-lead, applied by sinterization
7212.50.90
Other
7212.60.00
Clad
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
Show details
7213.10.00
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20.00
Other, of free-cutting steel
7213.9
Other
7213.91
Of circular cross section measuring less than 14 mm in diameter
7213.91.10
Containing by weight 0,6% or more of carbon
7213.91.90
Other
7213.99
Others
7213.99.10
Containing by weight 0,6% or more of carbon
7213.99.90
Other
7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Show details
7214.10
Forged
7214.10.10
Containing by weight 0,6% or more of carbon
7214.10.90
Other
7214.20.00
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.30.00
Other, of free-cutting steel
7214.9
Other
7214.91.00
Of rectangular (other than square) cross-section
7214.99
Others
7214.99.10
Of circular cross-section
7214.99.90
Other
7215
Other bars and rods of iron or non-alloy steel
Show details
7215.10.00
Of free-cutting steel, not further worked than cold-formed or cold- finished
7215.50.00
Other, not further worked than cold-formed or cold-finished
7215.90
Other
7215.90.10
Containing by weight 0,6% or more of carbon
7215.90.90
Other
7216
Angles, shapes and sections of iron or non-alloy steel
Show details
7216.10.00
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.2
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.00
L sections
7216.22.00
T sections
7216.3
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more
7216.31.00
U sections
7216.32.00
I sections
7216.33.00
H sections
7216.40
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.40.10
Of a height not exceeding 200 mm
7216.40.90
Other
7216.50.00
Other angles, shapes and sections, not further worked than hot- rolled, hot-drawn or extruded
7216.6
Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216.61
Obtained from flat-rolled products
7216.61.10
Of a height of less than 80 mm
7216.61.90
Other
7216.69
Others
7216.69.10
Of a height of less than 80 mm
7216.69.90
Other
7216.9
Other
7216.91.00
Cold-formed or cold-finished from flat-rolled products
7216.99.00
Other
7217
Wire of iron or non-alloy steel
Show details
7217.10
Not plated or coated, whether or not polished
7217.10.1
Containing in weight less than or equal to 0.6 percent of carbon
7217.10.11
With a content by weight of less than 0,035% of phosphorus and of sulfur of less than 0.035%, tempered and tempered, maximum unloaded arrow of 1 cm in 1 m, tensile strength equal to or greater than 1,960 MPa and whose largest dimension of cross-section is
7217.10.19
Other
7217.10.90
Other
7217.20
Plated or coated with zinc
7217.20.10
Containing by weight 0,6% or more of carbon
7217.20.90
Other
7217.30
Plated or coated with other base metals
7217.30.10
Containing by weight 0,6% or more of carbon
7217.30.90
Other
7217.90.00
Other
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Show details
7218.10.00
Ingots and other primary forms
7218.9
Other
7218.91.00
Of rectangular (other than square) cross-section
7218.99.00
Other
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.1
Not further worked than hot-rolled, in coils
7219.11.00
Of a thickness exceeding 10 mm
7219.12.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.13.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.14.00
Of a thickness of less than 3 mm
7219.2
Not further worked than hot-rolled, not in coils
7219.21.00
Of a thickness exceeding 10 mm
7219.22.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.00
Of a thickness of less than 3 mm
7219.3
Not further worked than cold-rolled (cold-reduced)
7219.31.00
Of a thickness of 4.75 mm or more
7219.32.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.33.00
Of a thickness exceeding 1 mm but less than 3 mm
7219.34.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.35.00
Of a thickness of less than 0.5 mm
7219.90
Other
7219.90.10
Of a thickness of less than 4.75 mm and a hardness of 42 hrc or more
7219.90.90
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.1
Not further worked than hot-rolled
7220.11.00
Of a thickness of 4.75 mm or more
7220.12
Of a thickness of less than 4.75 mm
7220.12.10
Of a thickness not exceeding 1.5 mm
7220.12.20
Of a thickness exceeding 1.5 mm but not exceeding 3 mm
7220.12.90
Other
7220.20
Not further worked than cold-rolled (cold-reduced)
7220.20.10
Of a width not exceeding 23 mm and a thickness not exceeding 0.1 mm
7220.20.90
Other
7220.90.00
Other