HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10.0000
Non-alloy pig iron containing by weight 0.5% or less of phosphorus
7201.20.0000
Non-alloy pig iron containing by weight more than 0.5% of phosphorus
7201.50.0000
Alloy pig iron; spiegeleisen
7202
Ferro-alloys
Show details
7202.1
Ferro-manganese
7202.11.0000
Containing by weight more than 2% of carbon
7202.19.0000
Other
7202.2
Ferro-silicon
7202.21.0000
Containing by weight more than 55% of silicon
7202.29.0000
Other
7202.30.0000
Ferro-silico-manganese
7202.4
Ferro-chromium
7202.41.0000
Containing by weight more than 4% of carbonNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies
7202.49.0000
OtherNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies
7202.50.0000
Ferro-silico-chromium
7202.60.0000
Ferro-nickel
7202.70.0000
Ferro-molybdenum
7202.80.0000
Ferro-tungsten and ferro-silico-tungsten
7202.9
Other
7202.91.0000
Ferro-titanium and ferro-silico-titanium
7202.92.0000
Ferro-vanadium
7202.93.0000
Ferro-niobium
7202.99.0000
Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
Show details
7203.10.0000
Ferrous products obtained by direct reduction of iron ore
7203.90.0000
Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
7204.10.0000
Waste and scrap of cast iron
7204.2
Waste and scrap of alloy steel
7204.21.0000
Of stainless steel
7204.29.0000
Other
7204.30.0000
Waste and scrap of tinned iron or steel
7204.4
Other waste and scrap
7204.41.00
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.41.0010
No.1 in bundles
7204.41.0020
Other turnings and shavings
7204.41.0090
Other
7204.49.00
Other
7204.49.0010
No. 1 heavy melting
7204.49.0020
No. 2 heavy melting
7204.49.009
Other
7204.49.0091
Shredded
7204.49.0099
Other
7204.50.0000
Remelting scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.0000
Granules
7205.2
Powders
7205.21.0000
Of alloy steel
7205.29.0000
Other
7206
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
Show details
7206.10.0000
Ingots
7206.90.0000
Other
7207
Semi-finished products of iron or non-alloy steel
Show details
7207.1
Containing by weight less than 0.25% of carbon
7207.11.00
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207.11.0010
Of iron
7207.11.002
Of non-alloy steel
7207.11.0021
Billets
7207.11.0029
Other
7207.12.0000
Other, of rectangular (other than square) cross-section
7207.19.00
Other
7207.19.0010
Rounds
7207.19.0090
Other
7207.20.00
Containing by weight 0.25% or more of carbon
7207.20.0010
Blooms
7207.20.0020
Billets
7207.20.0030
Slabs, sheet bars or rounds
7207.20.0090
Other
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10.0000
In coils, not further worked than hot-rolled, with patterns in relief
7208.2
Other, in coils, not further worked than hot-rolled, pickled
7208.25.0000
Of a thickness of 4.75 mm or more
7208.26.0000
Of a thickness of 3 mm or more but less than 4.75 mm
7208.27.0000
Of a thickness of less than 3 mm
7208.3
Other, in coils, not further worked than hot-rolled
7208.36.0000
Of a thickness exceeding 10 mm
7208.37.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.37.0010
Of a width of 600 mm or more but not exceeding 1,525 mm
7208.37.0020
Of a width exceeding 1,525 mm but not exceeding 1,830 mm
7208.37.0050
Of a width exceeding 1,830 mm
7208.38.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.0010
Of a width of 600 mm or more but not exceeding 1,525 mm
7208.38.0020
Of a width exceeding 1,525 mm but not exceeding 1,830 mm
7208.38.0050
Of a width exceeding 1,830 mm
7208.39.0000
Of a thickness of less than 3 mm
7208.40.0000
Not in coils, not further worked than hot-rolled, with patterns in relief
7208.5
Other, not in coils, not further worked than hot-rolled
7208.51.00
Of a thickness exceeding 10 mm
7208.51.001
Heat treated
7208.51.0011
Pressure vessel quality, vacuum-degassed
7208.51.0012
Pressure vessel quality, not vacuum-degassed
7208.51.0019
Other
7208.51.002
Other, of a thickness of more than 10 mm but not exceeding 15.875 mm
7208.51.0021
Of a width less than 1,168.4 mm
7208.51.0022
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.51.0023
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.51.0024
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.51.0025
Of a width exceeding 3,098.8 mm
7208.51.003
Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm
7208.51.0031
Of a width less than 1,168.4 mm
7208.51.0032
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.51.0033
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.51.0034
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.51.0035
Of a width exceeding 3,098.8 mm
7208.51.004
Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm
7208.51.0041
Of a width less than 1,168.4 mm
7208.51.0042
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.51.0043
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.51.0044
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.51.0045
Of a width exceeding 3,098.8 mm
7208.51.005
Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm
7208.51.0051
Of a width less than 1,168.4 mm
7208.51.0052
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.51.0053
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.51.0054
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.51.0055
Of a width exceeding 3,098.8 mm
7208.51.006
Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm
7208.51.0061
Of a width less than 1,168.4 mm
7208.51.0062
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.51.0063
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.51.0064
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.51.0065
Of a width exceeding 3,098.8 mm
7208.51.007
Other, of a thickness exceeding 101.6 mm
7208.51.0071
Of a width less than 1,168.4 mm
7208.51.0072
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.51.0073
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.51.0074
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.51.0075
Of a width exceeding 3,098.8 mm
7208.52.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.52.001
Heat treated
7208.52.0011
Pressure vessel quality, vacuum-degassed
7208.52.0012
Pressure vessel quality, not vacuum-degassed
7208.52.0019
Other
7208.52.008
Other
7208.52.0081
Of a width less than 1,168.4 mm
7208.52.0082
Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm
7208.52.0083
Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm
7208.52.0084
Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm
7208.52.0085
Of a width exceeding 3,098.8 mm
7208.53.0000
Other, of a thickness of 3 mm or more but less than 4.75 mm
7208.54.0000
Other, of a thickness of less than 3 mm
7208.90.0000
Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Show details
7209.1
In coils, not further worked than cold-rolled (cold-reduced)
7209.15.0000
Of a thickness of 3 mm or more
7209.16.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.16.0040
Annealed
7209.16.0090
Other
7209.17.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.17.0040
Annealed
7209.17.0090
Other
7209.18.0000
Of a thickness of less than 0.5 mm
7209.2
Not in coils, not further worked than cold-rolled (cold-reduced)
7209.25.0000
Of a thickness of 3 mm or more
7209.26.0000
Of a thickness exceeding 1 mm but less than 3 mm
7209.27.0000
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.28.0000
Of a thickness of less than 0.5 mm
7209.90.0000
Other
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
Show details
7210.1
Plated or coated with tin
7210.11.0000
Of a thickness of 0.5 mm or more
7210.12.0000
Of a thickness of less than 0.5 mm
7210.20.0000
Plated or coated with lead, including terne-plate
7210.30.0000
Electrolytically plated or coated with zinc
7210.4
Otherwise plated or coated with zinc
7210.41.0000
Corrugated
7210.49.00
Other
7210.49.0040
Of a thickness less than 0.25 mm
7210.49.0050
Of a thickness of 0.25 mm or more but less than 0.5 mm
7210.49.0060
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7210.49.0070
Of a thickness exceeding 1 mm
7210.50.0000
Plated or coated with chromium oxides or with chromium and chromium oxides
7210.6
Plated or coated with aluminum
7210.61.00
Plated or coated with aluminium-zinc alloys
7210.61.0010
Of a thickness of less than 1.44 mm
7210.61.0020
Of a thickness of 1.44 mm or more
7210.69.00
Other
7210.69.0010
Of a thickness of less than 1.44 mm
7210.69.0020
Of a thickness of 1.44 mm or more
7210.70.00
Painted, varnished or coated with plastics
7210.70.0010
Not plated or coated with metal and not clad
7210.70.002
Plated or coated with zinc
7210.70.0021
Electrolytically
7210.70.0029
Other
7210.70.0090
Other
7210.90.0000
Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.1
Not further worked than hot-rolled
7211.13.0000
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211.14.00
Other, of a thickness of 4.75 mm or more
7211.14.0010
Not in coils
7211.14.0090
Other
7211.19.00
Other
7211.19.0010
Not in coils
7211.19.0090
Other
7211.2
Not further worked than cold-rolled (cold-reduced)
7211.23.0000
Containing by weight less than 0.25% of carbon
7211.29.0000
Other
7211.90.0000
Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
Show details
7212.10.0000
Plated or coated with tin
7212.20.00
Electrolytically plated or coated with zinc
7212.20.0010
Of a thickness less than 0.25 mm
7212.20.0020
Of a thickness of 0.25 mm or more but less than 0.5 mm
7212.20.0030
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7212.20.0040
Of a thickness exceeding 1 mm
7212.30.00
Otherwise plated or coated with zinc
7212.30.0010
Of a thickness less than 0.25 mm
7212.30.0020
Of a thickness of 0.25 mm or more but less than 0.5 mm
7212.30.0030
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7212.30.0040
Of a thickness exceeding 1 mm
7212.40.00
Painted, varnished or coated with plastics
7212.40.0010
Not plated or coated with metal and not clad
7212.40.0021
Electrolytically
7212.40.0029
Other
7212.40.0090
Other
7212.50.00
Otherwise plated or coated
7212.50.0030
Of a thickness less than 0.25 mm
7212.50.0040
Of a thickness of 0.25 mm or more but less than 0.5 mm
7212.50.0050
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7212.50.0060
Of a thickness exceeding 1 mm
7212.60.0000
Clad
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
Show details
7213.10.00
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.10.0011
Of a diameter of 12 mm or less
7213.10.0012
Of a diameter of more than 12 mm but not exceeding 17 mm
7213.10.0013
Of a diameter exceeding 17 mm
7213.10.0090
Other
7213.20.00
Other, of free-cutting steel
7213.20.0050
Containing by weight 0.1% or more of lead
7213.20.0090
Other
7213.9
Other
7213.91.00
Of circular cross-section measuring less than 14 mm in diameter
7213.91.004
Not tempered or treated and not partly manufactured
7213.91.0041
Tire cord-quality steel wire rod, as defined in Statistical Note 2 to this Chapter
7213.91.0042
Of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter
7213.91.0043
Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter
7213.91.0049
Other
7213.91.0050
Other, containing by weight less than 0.25% of carbon
7213.91.0060
Other, containing by weight 0.25% or more but less than 0.6% of carbon
7213.91.0070
Other, containing by weight 0.6% or more of carbon
7213.99.00
Other
7213.99.001
Of circular cross section, containing by weight less than 0.25% ofcarbon:
7213.99.0011
Of a diameter of 14 mm or more but less than 19 mm
7213.99.0012
Of a diameter of 19 mm or more but not exceeding 25.5 mm
7213.99.0013
Of a diameter exceeding 25.5 mm
7213.99.003
Of circular cross section, containing by weight 0.25% or more but lessthan 0.6% of carbon
7213.99.0031
Of a diameter of 14 mm or more but less than 19 mm
7213.99.0032
Of a diameter of 19 mm or more but not exceeding 25.5 mm
7213.99.0033
Of a diameter exceeding 25.5 mm
7213.99.005
Of circular cross section, containing by weight 0.6% or more of carbon
7213.99.0051
Of a diameter of 14 mm or more but less than 19 mm
7213.99.0052
Of a diameter of 19 mm or more but not exceeding 25.5 mm
7213.99.0053
Of a diameter exceeding 25.5 mm
7213.99.0090
Other
7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Show details
7214.10.0000
Forged
7214.20.00
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.20.001
Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less
7214.20.0011
With a maximum yield point of 400MPa
7214.20.0012
With a minimum yield point greater than 400MPa but not exceeding 500MPa
7214.20.0013
With a minimum yield point greater than 500MPa but not exceeding 600MPa
7214.20.0014
With a minimum yield point greater than 600MPa
7214.20.002
Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm
7214.20.0021
With a maximum yield point of 400MPa
7214.20.0022
With a minimum yield point greater than 400MPa but not exceeding 500MPa
7214.20.0023
With a minimum yield point greater than 500MPa but not exceeding 600MPa
7214.20.0024
With a minimum yield point greater than 600MPa
7214.20.003
Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm
7214.20.0031
With a maximum yield point of 400MPa
7214.20.0032
With a minimum yield point greater than 400MPa but not exceeding 500MPa
7214.20.0033
With a minimum yield point greater than 500MPa but not exceeding 600MPa
7214.20.0034
With a minimum yield point greater than 600MPa
7214.20.0090
Other
7214.30.00
Other, of free-cutting steel
7214.30.0010
Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufactures
7214.30.002
Flat bars, including flat grader blade sections
7214.30.0024
Of a width not exceeding 76 mm
7214.30.0025
Of a width exceeding 76 mm but less than 152 mm
7214.30.0026
Of a width of 152 mm or more
7214.30.003
Rounds
7214.30.0033
Of a diameter not exceeding 76 mm
7214.30.0034
Of a diameter exceeding 76 mm
7214.30.0040
Hexagons
7214.30.0050
Squares
7214.30.0090
Other
7214.9
Other
7214.91.00
Of rectangular (other than square) cross-section
7214.91.001
Of a width not exceeding 75 mm
7214.91.0011
Of a width not exceeding 76 mm
7214.91.0012
Of a width exceeding 76 mm but less than 152 mm
7214.91.0013
Of a width of 152 mm or more
7214.91.002
Of a width exceeding 75 mm but less than 150 mm
7214.91.0021
Of a width not exceeding 76 mm
7214.91.0022
Of a width exceeding 76 mm but less than 152 mm
7214.91.0023
Of a width of 152 mm or more
7214.91.003
Of a width of 150 mm or more
7214.91.0031
Of a width not exceeding 76 mm
7214.91.0032
Of a width exceeding 76 mm but less than 152 mm
7214.91.0033
Of a width of 152 mm or more
7214.99.00
Other
7214.99.0020
Hexagons
7214.99.0030
Squares
7214.99.004
Other, containing by weight less than 0.25% of carbon
7214.99.0041
Rounds, of a diameter of less than 76 mm
7214.99.0042
Rounds, of a diameter of 76 mm or more but not exceeding 152 mm
7214.99.0043
Rounds, of a diameter exceeding 152 mm
7214.99.0049
Other
7214.99.005
Other, containing by weight 0.25% or more but less than 0.6% ofcarbon
7214.99.0051
Rounds, of a diameter of less than 76 mm
7214.99.0052
Rounds, of a diameter of 76 mm or more but not exceeding 152 mm
7214.99.0053
Rounds, of a diameter exceeding 152 mm
7214.99.0059
Other
7214.99.0060
Other, containing by weight 0.6% or more of carbon
7215
Other bars and rods of iron or non-alloy steel
Show details
7215.10.00
Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.10.0020
Rounds
7215.10.0090
Other
7215.50.00
Other, not further worked than cold-formed or cold-finished
7215.50.0010
Flat bars
7215.50.002
Rounds
7215.50.0021
Ground, turned or polished
7215.50.0029
Other
7215.50.0090
Other
7215.90.00
Other
7215.90.0010
Chrome plated
7215.90.0020
Corrosion resistant concrete reinforcing bars
7215.90.0030
Other concrete reinforcing bars
7215.90.0090
Other
7216
Angles, shapes and sections of iron or non-alloy steel
Show details
7216.10.00
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.10.001
U sections
7216.10.0011
American standard
7216.10.0019
Other
7216.10.002
I sections
7216.10.0021
American standard
7216.10.0029
Other
7216.10.0030
H sections
7216.2
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.00
L sections
7216.21.0010
Equal legs
7216.21.0020
Unequal legs
7216.22.0000
T sections
7216.3
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.31.00
U sections
7216.31.001
Of a height of 80 mm or more but not exceeding 152.4 mm
7216.31.0011
American standard
7216.31.0012
For motor vehicles
7216.31.0019
Other
7216.31.002
Of a height exceeding 152.4 mm
7216.31.0021
American standard
7216.31.0022
For motor vehicles
7216.31.0029
Other
7216.32.00
I sections
7216.32.0010
Of a height of 80 mm or more but not exceeding 152.4 mm
7216.32.0020
Of a height exceeding 152.4 mm
7216.33.00
H sections
7216.33.001
Wide flange
7216.33.0011
Of a height not exceeding 150 mm
7216.33.0012
Of a height exceeding 150 mm but not exceeding 355 mm
7216.33.0013
Of a height exceeding 355 mm but not exceeding 635 mm
7216.33.0014
Of a height exceeding 635 mm
7216.33.0020
Bearing pile
7216.33.009
Other
7216.33.0091
Of a height of 80 mm or more but not exceeding 152.4 mm
7216.33.0092
Of a height exceeding 152.4 mm
7216.40.00
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.40.001
L sections, equal legs
7216.40.0011
Of a height of 80 mm or more but not exceeding 152.4 mm
7216.40.0012
Of a height exceeding 152.4 mm
7216.40.002
L sections, unequal legs
7216.40.0021
Large leg, of a height of 80 mm or more but not exceeding 152.4 mm
7216.40.0022
Large leg, of a height exceeding 152.4 mm
7216.40.0030
T sections
7216.50.00
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.50.0010
For use in ships, boats or floating structures
7216.50.0020
Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end sh
7216.50.0030
Track shoe profile bars of steel, of a width of 190 mm or more but not exceeding 350 mm and of a height not exceeding 150 mm, for use in the manufacture of track shoes for track-laying machinery or vehicles
7216.50.0090
Other
7216.6
Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216.61.0000
Obtained from flat-rolled products
7216.69.0000
Other
7216.9
Other
7216.91.00
Cold-formed or cold-finished from flat-rolled products
7216.91.0010
L sections
7216.91.0020
I or H sections
7216.91.0030
U sections
7216.91.009
Other
7216.91.0091
Ribbed shapes
7216.91.0099
Other
7216.99.00
Other
7216.99.0010
L sections
7216.99.0020
I or H sections
7216.99.0030
U sections
7216.99.009
Other
7216.99.0091
Ribbed shapes
7216.99.0099
Other
7217
Wire of iron or non-alloy steel
Show details
7217.10.00
Not plated or coated, whether or not polished
7217.10.004
Round, heat treated, containing by weight less than 0.25% of carbon
7217.10.0041
Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg
7217.10.0042
Other, of a diameter of less than 1 mm
7217.10.0043
Other, of a diameter of 1 mm or more but less than 1.5 mm
7217.10.0044
Other, of a diameter of 1.5 mm or more but less than 3 mm
7217.10.0045
Other, of a diameter of 3 mm or more
7217.10.005
Other, containing by weight less than 0.25% of carbon
7217.10.0051
Round, of a diameter of less than 1 mm
7217.10.0052
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.10.0053
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.10.0054
Round, of a diameter of 3 mm or more
7217.10.0055
Flat
7217.10.0059
Other
7217.10.006
Other round, containing by weight 0.25% or more but less than 0.6% ofcarbon
7217.10.0061
Heat treated, of a diameter of less than 1 mm
7217.10.0062
Heat treated, of a diameter of 1 mm or more but less than 1.5 mm
7217.10.0063
Heat treated, of a diameter of 1.5 mm or more but less than 3 mm
7217.10.0064
Heat treated, of a diameter of 3 mm or more
7217.10.0065
Other, of a diameter of less than 1 mm
7217.10.0066
Other, of a diameter of 1 mm or more but less than 1.5 mm
7217.10.0067
Other, of a diameter of 1.5 mm or more but less than 3 mm
7217.10.0068
Other, of a diameter of 3 mm or more
7217.10.007
Other, containing by weight 0.25% or more but less than 0.6% ofcarbon
7217.10.0071
Flat
7217.10.0079
Other
7217.10.008
Other round, containing by weight 0.6% or more of carbon
7217.10.0081
Heat treated, of a diameter of less than 1 mm
7217.10.0082
Heat treated, of a diameter of 1 mm or more but less than 1.5 mm
7217.10.0083
Heat treated, of a diameter of 1.5 mm or more but less than 3 mm
7217.10.0084
Heat treated, of a diameter of 3 mm or more
7217.10.0085
Other, of a diameter of less than 1 mm
7217.10.0086
Other, of a diameter of 1 mm or more but less than 1.5 mm
7217.10.0087
Other, of a diameter of 1.5 mm or more but less than 3 mm
7217.10.0088
Other, of a diameter of 3 mm or more
7217.10.009
Other, containing by weight 0.6% or more of carbon
7217.10.0091
Flat
7217.10.0099
Other
7217.20.00
Plated or coated with zinc
7217.20.0010
Flat
7217.20.004
Plated or coated with zinc-aluminum, containing by weight less than0.25% of carbon
7217.20.0041
Round, of a diameter of less than 1 mm
7217.20.0042
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.20.0043
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.20.0044
Round, of a diameter of 3 mm or more
7217.20.0049
Other
7217.20.005
Plated or coated with zinc-aluminum, containing by weight 0.25% ormore but less than 0.6% of carbon
7217.20.0051
Round, of a diameter of less than 1 mm
7217.20.0052
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.20.0053
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.20.0054
Round, of a diameter of 3 mm or more
7217.20.0059
Other
7217.20.006
Plated or coated with zinc-aluminum, containing by weight 0.6% ormore of carbon
7217.20.0061
Round, of a diameter of less than 1 mm
7217.20.0062
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.20.0063
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.20.0064
Round, of a diameter of 3 mm or more
7217.20.0069
Other
7217.20.007
Other, containing by weight less than 0.25% of carbon
7217.20.0071
Round, of a diameter of less than 1 mm
7217.20.0072
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.20.0073
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.20.0074
Round, of a diameter of 3 mm or more
7217.20.0079
Other
7217.20.008
Other, containing by weight 0.25% or more but less than 0.6% ofcarbon
7217.20.0081
Round, of a diameter of less than 1 mm
7217.20.0082
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.20.0083
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.20.0084
Round, of a diameter of 3 mm or more
7217.20.0089
Other
7217.20.009
Other, containing by weight 0.6% or more of carbon
7217.20.0091
Round, of a diameter of less than 1 mm
7217.20.0092
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.20.0093
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.20.0094
Round, of a diameter of 3 mm or more
7217.20.0099
Other
7217.30.00
Plated or coated with other base metals
7217.30.0010
Flat
7217.30.002
Other, containing by weight less than 0.25% of carbon
7217.30.0021
Round, of a diameter of less than 1 mm
7217.30.0022
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.30.0023
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.30.0024
Round, of a diameter of 3 mm or more
7217.30.0029
Other
7217.30.003
Other, containing by weight 0.25% or more but less than 0.6% ofcarbon
7217.30.0031
Round, of a diameter of less than 1 mm
7217.30.0032
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.30.0033
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.30.0034
Round, of a diameter of 3 mm or more
7217.30.0039
Other
7217.30.004
Other, containing by weight 0.6% or more of carbon
7217.30.0041
Round, of a diameter of less than 1 mm
7217.30.0042
Round, of a diameter of 1 mm or more but less than 1.5 mm
7217.30.0043
Round, of a diameter of 1.5 mm or more but less than 3 mm
7217.30.0044
Round, of a diameter of 3 mm or more
7217.30.0049
Other
7217.90.00
Other
7217.90.0020
Coated with plastics
7217.90.009
Other
7217.90.0091
Containing by weight less than 0.25% of carbon
7217.90.0092
Containing by weight 0.25% or more but less than 0.6% of carbon
7217.90.0093
Containing by weight 0.6% or more of carbon
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Show details
7218.10.0000
Ingots and other primary forms
7218.9
Other
7218.91.0000
Of rectangular (other than square) cross-section
7218.99.00
Other
7218.99.0010
Blooms, billets, rounds, slabs and sheet bars
7218.99.0090
Other
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.1
Not further worked than hot-rolled, in coils
7219.11.0000
Of a thickness exceeding 10 mm
7219.12.0000
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.13.0000
Of a thickness of 3 mm or more but less than 4.75 mm
7219.14.0000
Of a thickness of less than 3 mm
7219.2
Not further worked than hot-rolled, not in coils
7219.21.00
Of a thickness exceeding 10 mm
7219.21.0010
Of a width of 600 mm or more but not exceeding 1,830 mm
7219.21.0020
Of a width exceeding 1,830 mm
7219.22.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.22.0010
Of a width of 600 mm or more but not exceeding 1,830 mm
7219.22.0020
Of a width exceeding 1,830 mm
7219.23.0000
Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.0000
Of a thickness of less than 3 mm
7219.3
Not further worked than cold-rolled (cold-reduced)
7219.31.0000
Of a thickness of 4.75 mm or more
7219.32.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.32.0010
300 Series
7219.32.0090
Other
7219.33.00
Of a thickness exceeding 1 mm but less than 3 mm
7219.33.0010
300 Series
7219.33.0090
Other
7219.34.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.34.0010
300 Series
7219.34.0090
Other
7219.35.00
Of a thickness of less than 0.5 mm
7219.35.0010
300 Series
7219.35.0090
Other
7219.90.0000
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.1
Not further worked than hot-rolled
7220.11.0000
Of a thickness of 4.75 mm or more
7220.12.0000
Of a thickness of less than 4.75 mm
7220.20.00
Not further worked than cold-rolled (cold-reduced)
7220.20.0010
300 Series
7220.20.0090
Other
7220.90.0000
Other