HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Rough casting and mirror casting, ingots, blocks or other primary shapes.
Show details
7201.1000
Unalloyed pig iron with phosphorus content not exceeding 0.5% by weight
7201.2000
Unalloyed pig iron with phosphorus content exceeding 0.5% (by weight)
7201.5000
Alloy pig iron Mirror casting
7202
ferroalloy.
Show details
7202.1100
Carbon content exceeding 2% (by weight)
7202.1900
Other
7202.2100
Silicon content exceeding 55% (by weight)
7202.2900
Other
7202.3000
Ferrosilicon manganese
7202.4100
Carbon content exceeding 4% (by weight)
7202.4900
Other
7202.5000
Ferrosilicon chromium
7202.6000
Ferronickel
7202.7000
Ferromolybdenum
7202.8000
Ferrotungsten and ferrotungsten
7202.9100
Ferrotitanium and ferrosilicon titanium
7202.9200
Ferrovanadium
7202.9300
Ferroniobium
7202.9900
Other
7203
Iron products obtained by direct reduction of iron ore and other sponge iron products, in blocks, pellets or similar forms; Iron with purity of 99.94% (by weight) or more, in blocks, pellets or similar forms.
Show details
7203.1000
Iron products from direct reduction of iron ore
7203.9000
Other
7204
Steel scrap and scrap; Scrap steel or ingot.
Show details
7204.1000
Casting waste
7204.2100
Stainless steel
7204.2900
Other
7204.3000
Scrap and scrap of iron or tinned steel
7204.4100
Turning, chipping, chipping, filing (polishing, sawing, filing) and stamping or cutting, whether or not packaged
7204.4900
Other
7204.5000
Scrap ingot
7205
Garnet and powder, pig iron, mirror cast iron, steel.
Show details
7205.1000
Granalas
7205.2100
Alloy steel
7205.2900
Other
7206
Iron and unalloyed steel, ingots or other primary forms, except iron of heading 72.03.
Show details
7206.1000
ingot casting
7206.9000
Other
7207
Intermediate products of iron or non alloy steel.
Show details
7207.1100
Square or rectangular section with width less than twice the thickness
7207.1200
Other, rectangular section
7207.1900
Other
7207.2000
Carbon content not exceeding 0.25% by weight
7208
Flat rolled products of hot rolled iron or non alloy steel, width 600 mm or more, without impregnation or coating.
Show details
7208.1000
Coil, hot rolled, not further processed, embossed pattern
7208.2500
Thickness not exceeding 4.75mm
7208.2600
Thickness not exceeding 3mm but not exceeding 4,75mm
7208.2700
Thickness less than 3mm
7208.3600
Thickness over 10mm
7208.3700
Thickness not exceeding 4,75 mm but not exceeding 10 mm
7208.3800
Thickness not exceeding 3mm but not exceeding 4,75mm
7208.3900
Thickness less than 3mm
7208.4000
Not rolled, not further processed after hot rolling, with relief pattern
7208.5100
Thickness over 10mm
7208.5200
Thickness not exceeding 4,75 mm but not exceeding 10 mm
7208.5300
Thickness not exceeding 3mm but not exceeding 4,75mm
7208.5400
Thickness less than 3mm
7208.9000
Other
7209
Flat rolled products of iron or non alloy steel, width 600 mm or more, cold rolled, without impregnation or coating.
Show details
7209.1500
Thickness not exceeding 3mm
7209.1600
Thickness exceeding 1mm but less than 3mm
7209.1700
Thickness not exceeding 0.5mm but not exceeding 1mm
7209.1800
Thickness less than 0.5mm
7209.2500
Thickness not exceeding 3mm
7209.2600
Thickness exceeding 1mm but less than 3mm
7209.2700
Thickness not exceeding 0.5mm but not exceeding 1mm
7209.2800
Thickness less than 0.5mm
7209.9000
Other
7210
Flat rolled products of iron or non alloy steel, width 600 mm and above, cladding or cladding.
Show details
7210.1100
Thickness not exceeding 0.5mm
7210.1200
Thickness less than 0.5mm
7210.2000
Use, including lead and tin alloy plating
7210.3000
Electrolytic galvanizing
7210.4100
Wavy
7210.4900
Other
7210.5000
Coated with chromium oxide or chromium oxide and chromium oxide
7210.6100
Galvanized aluminum alloy
7210.6900
Other
7210.7000
Painting, painting or plastic
7210.9000
Other
7211
Flat rolled products of iron or non alloy steel, width less than 600 mm, without impregnation or coating.
Show details
7211.1300
On four sides or closed grooves, the width exceeds 150 mm, the thickness does not exceed 4 mm, no roll, no relief pattern
7211.1400
Others, thickness not exceeding 4.75mm
7211.1900
Other
7211.2300
Carbon content less than 0.25% (by weight)
7211.29
Other
7211.2910
Carbon content not exceeding 0.60% by weight
7211.2990
Other
7211.9000
Other
7212
Flat rolled products of iron or non alloy steel, width less than 600mm, plated or coated.
Show details
7212.1000
Tinned
7212.2000
Electrolytic galvanizing
7212.3000
Other galvanizing
7212.4000
Painting, painting or plastic
7212.5000
Other coatings
7212.6000
Electroplated
7213
Iron or non alloy steel wire rod
Show details
7213.1000
Produced in the rolling process with grooves, lace, grooves or relief
7213.2000
Other, free cutting steel
7213.91
Circular section with diameter less than 14 mm
7213.9110
Diameter less than 14 mm but not more than 10 mm
7213.9120
Diameter less than 10mm but not more than 7mm
7213.9190
Other
7213.9900
Other
7214
Hot rolled, rolled or extruded bars of iron or non alloy steel, not further forged, twisted after rolling.
Show details
7214.1000
Forged
7214.2000
With notch, lace, groove or relief produced during rolling or twisted after rolling
7214.3000
Other, free cutting steel
7214.9100
Rectangular section
7214.9900
Other
7215
Other iron or non alloy steel bars.
Show details
7215.1000
Free cutting steel, cold working or cold working
7215.5000
Others, not further processed or cold worked
7215.9000
Other
7216
Iron or non alloy steel profiles.
Show details
7216.1000
U-shaped steel, I-shaped or H-shaped, not further processed after hot rolling or extrusion, height not exceeding 80mm
7216.2100
L section
7216.2200
T-section
7216.3100
U-shaped section
7216.3200
Section I
7216.3300
H section
7216.4000
L or T-section steel, not further processed after hot rolling or extrusion, height not exceeding 80mm
7216.5000
Other profiles, not further processed after hot rolling or extrusion
7216.6100
Made of flat laminate
7216.6900
Other
7216.9100
Cold rolled or cold-rolled finished products
7216.9900
Other
7217
Non alloy steel or iron wire.
Show details
7217.1000
Uncoated, whether polished or not
7217.2000
Galvanized
7217.3000
Other base metal cladding
7217.9000
Other
7218
Ingots or other primary shapes of stainless steel; Stainless steel intermediate products.
Show details
7218.1000
Ingot or other primary shape
7218.9100
Rectangular section
7218.9900
Other
7219
Stainless steel flat rolled products, width 600 mm or more.
Show details
7219.1100
Thickness over 10mm
7219.1200
Thickness not exceeding 4,75 mm but not exceeding 10 mm
7219.1300
Thickness not exceeding 3mm but not exceeding 4,75mm
7219.1400
Thickness less than 3mm
7219.2100
Thickness over 10mm
7219.2200
Thickness not exceeding 4,75 mm but not exceeding 10 mm
7219.2300
Thickness not exceeding 3mm but not exceeding 4,75mm
7219.2400
Thickness less than 3mm
7219.3100
Thickness not exceeding 4.75mm
7219.3200
Thickness not exceeding 3mm but not exceeding 4,75mm
7219.3300
Thickness exceeding 1mm but less than 3mm
7219.3400
Thickness not exceeding 0.5mm but not exceeding 1mm
7219.3500
Thickness less than 0.5mm
7219.9000
Other
7220
Stainless steel flat rolled products, width (within 600mm)
Show details
7220.1100
Thickness not exceeding 4.75mm
7220.1200
Thickness less than 4.75mm
7220.2000
Simple cold rolling
7220.9000
Other