Czech Motors, electrical equipment and parts thereof; recorders and amplifiers, television images, sound recording and reproducing equipment and parts thereof, and accessories HS Code Classification Lookup | Comprehensive HS Code Search Tool by Ecer Freight

HS Code Finder

Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.

8501.00.0000 Electric motors and generators (excluding generating sets)

Show details

8501.10.0000 Motors of an output not exceeding 37,5 W

8501.10.1000 Synchronous motors of an output not exceeding 18 W

8501.10.1010 For use in certain types of aircraft

8501.10.1020 Synchronous motor for a dishwasher with a water flow control mechanism with - a length without axle of 24 mm (+/- 0,3), - a diameter of 49,3 mm (+/- 0,3) - a rated voltage of 220 V AC or more but not more than 240 V AC, - a rated frequency of 50 Hz or mor

8501.10.1030 Motors for air pumps, with:operating voltage of 9 VDC or more but not more than 24 VDC,operating temperature range of -40C or more but not more than 80C,an output not exceeding 18 W for use in the manufacture of pneumatic support and ventilation systems f

8501.10.1040 Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers

8501.10.1050 Linear actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or no

8501.10.1060 Rotary actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with Hall Effec

8501.10.1090 Other

8501.10.9100 Other

8501.10.9110 For use in certain types of aircraft

8501.10.9190 Other

8501.10.9300 AC motors

8501.10.9310 For use in certain types of aircraft

8501.10.9390 Other

8501.10.9900 DC motors

8501.10.9910 For use in certain types of aircraft

8501.10.9920 Worm axis motor for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with a worm wheel,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with Hall Effect Sensor,-with a

8501.10.9930 Linear actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or no

8501.10.9940 Rotary actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with Hall Effec

8501.10.9950 Electric (DC) motor powering height adjusting with:-a rated output mechanical power not exceeding 35 W,-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,-a stall torque of 45 Nm and ultimate torque o

8501.10.9956 Other

8501.10.9958 DC Motor : - with a speed rotation of not more than 6500 rpm (without load), - with a nominal voltage of 12 V (plus or minus 4 V), - with a maximal power below than 20 W, - with a specified temperature range from -40 degree C to 160 degree C, - with a wo

8501.10.9960 DC motor - with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded - with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers

8501.10.9964 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/0,1),

8501.10.9965 Electric turbocharger actuator, with: - a DC motor, - an integrated gear mechanism, - a (pulling)force of 200 N or more at a minimum of 140 degree C elevated ambient temperature, - a (pulling) force of 250 N or more in each position of its stroke, - an ef

8501.10.9970 DC stepping motor, with - an angle of step of 7,5degree(A+ or -0,5 degree - a two-phase winding, - a rated voltage of 9 V or more, but not more than 16,0 V - of a specified temperature range covering at least - 40 degree C to + 105 degree C - with or with

8501.10.9975 Permanently excited DC motor with - a multiple-phase winding - an external diameter of 28 mm or more but not more than 35 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V

8501.10.9979 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20degree C to + 70degree C

8501.10.9980 DC stepping motor, with: - an angle of step of 7,5 degree(A+ or -0,5 degree), - a pull-out torque at 25 degree C of 25 mNm or more, - a pull-out pulse rate of 1 500 pps or more, - a two-phase winding, and - a rated voltage of 10,5 V or more, but not more

8501.10.9990 Other

8501.20.0000 Universal AC/DC motors of an output exceeding 37,5 W

8501.20.0010 Of an output exceeding 735 W but not exceeding 150 kW, for use in civil aircraft (TN100)

8501.20.0020 Of an output of less than 750 W or exceeding 150 kW, for use in certain types of aircraft

8501.20.0040 Universal AC/DC motor with:-a rated output of 50W but not higher than 1,2kW,；-a supply voltage of 230V,；-whether or notwith engine brake,；-whether or notassembled to a reduction gear with output shaft, which is contained in a housing,；-whether or not f

8501.20.0050 Universal AC/DC motor, rotating:-with a nominal supply voltage of 230V,；-with a power of more than 37,5W but not more than 2000W,；-with a stator cross-section of 93mm or morebut not more than 103mm and a thickness of 15mm or morebut not more than 45mm, an

8501.20.0060 Universal AC/DC motor, rotating:-with a nominal supply voltage of 230V,；-with a power of more than 37,5W but not more than 1200W,；-with a stator cross-section of 65mm or more but not more than 75mmand a thickness of 15mm or morebut not more than 45mm, and

8501.20.0070 Universal AC/DC motor, rotating:-with a nominal supply voltage of 230V,；-with a power of more than 37,5W but not more than 700W,；-with a stator cross-section of 49mm or more but not more than 59mmand a thickness of 15mm or morebut not more than 45mm,and；-

8501.20.0090 Other

8501.31.0000 Other DC motors; DC generators

8501.31.0010 Motors of an output exceeding 735 W, DC generators, for use in civil aircraft (TN100)

8501.31.0020 for use in certain types of aircraft

8501.31.0045 DC motors, brushless, with: - an external diameter of 90 mm or more, but not more than 110 mm, - a rated speed of not more than 3 680 rpm, - an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 degree C, - a supply voltage of 12 V, -

8501.31.0047 Motor for automotive electric seat adjustment applications:-with a shaft output on both motor sides,-consisting of a permanently excited DC motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effec

8501.31.0050 DC motors, brushless, with: - an external diameter of 80 mm or more, but not more than 200 mm,- a supply voltage of 9 V or more, but not more than 16 V,- an output at 20 degree celcius of 300 W or more, but not more than 750 W,- a torque at 20 degree celc

8501.31.0055 DC motor with commutator, with - an external diameter of 27.5 mm or more, but not more than 45 mm, - a rated speed of 11 000 rpm or more, but not more than 23 200 rpm, - a rated supply voltage of 3.6 V or more, but not more than 230 V, - an output power o

8501.31.0058 Permanently excited DC motor with: -an external diameter of 30 mm or more but not more than 90 mm, including mounting flange, -a rated speed of not more than 15 000 rpm, -an output of 45 W or more but not more than 400 W, and -a supply voltage of 9 V or m

8501.31.0063 Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with

8501.31.0068 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:；-a length of 110 mm or more but not more than 140 mm,；-a width of 90 mm or more b

8501.31.0080 Electronic actuator consisting of:- a DC motor having a power of less than 600 W,- for usage with a supply voltage of 12 V to 48 V,- with motor connection (plug-in connection),- with contactless position sensor,- built in a rectangular housing of a width

8501.31.0099 Other

8501.32.0000 Of an output exceeding 750 W but not exceeding 75 kW

8501.32.0010 For use in civil aircraft (TN100)

8501.32.0040 DC motor with or without commutator, withan external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of m

8501.32.0065 Ready for installation in vehicles or equipment of headings 8432and 8433,brushless and permanently excited direct current motor with:；-a specified speed of not more than 4100rpm,；-a minimum output of 400W, but not more than 1,3kW (at 12V), or with a minim

8501.32.0099 Other

8501.33.0000 Of an output exceeding 75 kW but not exceeding 375 kW

8501.33.0010 Motors of an output not exceeding 150 kW and generators, for use in civil aircraft (TN100)

8501.33.0020 Of an output exceding 150 kW, for use in certain types of aircraft

8501.33.0030 Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics

8501.33.0099 Other

8501.34.0000 Of an output exceeding 375 kW

8501.34.0010 Generators for use in civil aircraft (TN100)

8501.34.0099 Other

8501.40.0000 Other AC motors, single-phase

8501.40.2000 Of an output not exceeding 750 W

8501.40.2010 Of an output exceeding 735 W, for use in civil aircraft (TN100)

8501.40.2020 For use in certain types of aircraft

8501.40.2035 Electric AC motor, single-phase, with: -a rated power of 120 W or more but not more than 150 W, -an input power of 280 W or more but not more than 350 W, -an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm

8501.40.2045 Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a

8501.40.2050 Electric AC motor, single-phase, with: -a rated power of 300 W or more but not more than 370 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a r

8501.40.2055 Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, -a

8501.40.2060 Electric AC motor, single-phase, with: -a rated power of 275 W or more but not more than 325 W, -an output power of 550 W or more but not more than 600 W, -an input power of 800 W or more but not more than 1 000 W, -an external diameter of more than 150

8501.40.2065 Electric AC motor, single-phase, whether or not with commutator- with a nominal output of 180 W or more,- with an input power of 150 W or more but not more than 2 700 W,- with an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (±

8501.40.2080 Other

8501.40.8000 Of an output exceeding 750 W

8501.40.8010 Of an output not exceeding 150 kW, for use in civil aircraft (TN100)

8501.40.8020 Of an output exceeding 150 kW, for use in certain types of aircraft

8501.40.8030 Electric AC commutator motor, single-phase, with an output of more than 750 W, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (A+ or -0,2 mm) but not more than 135 mm (A+ or -0,2 mm), a rated speed of m

8501.40.8050 Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics

8501.40.8060 Electric AC motor, single-phase, whether or not with commutator- with a nominal output of 180 W or more,- with an input power of 150 W or more but not more than 2 700 W,- with an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (±

8501.40.8090 Other

8501.51.0000 Other AC motors, multi-phase

8501.51.0010 Of an output exceeding 735 W, for use in civil aircraft (TN100)

8501.51.0020 Of an output of less than 750 W, for use in certain types of aircraft

8501.51.0030 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with: - an output of 340 W or more but not more than 7,4 kW, - a flange of dimensions ofnot more than 180 mm x 180 mm, and - a length from flange to extreme

8501.51.0040 Electric AC motor, three-phase, with: -a rated power of 280 W or more but not more than 320 W, -an output power of 480 W or more but not more than 540 W, -an input power of 800 W or more but not more than 900 W, -an external diameter of 150 mm or more bu

8501.51.0050 Three phase AC synchronous brushless permanent magnet motor with:；-an output of 500W or more but not more than 700W,；-an external diameter of 129,7mm or more but not more than 180,3mm,；-a rated speed of 16000rpm or more but not more than 17000rpm,；-a weig

8501.51.0090 Other

8501.52.0000 Of an output exceeding 750 W but not exceeding 75 kW

8501.52.2000 Of an output exceeding 750 W but not exceeding 7,5 kW

8501.52.2010 For use in civil aircraft (TN100)

8501.52.2050 Other

8501.52.2089 Other

8501.52.3000 Of an output exceeding 7,5 kW but not exceeding 37 kW

8501.52.3010 For use in civil aircraft (TN100)

8501.52.3090 Other

8501.52.9000 Of an output exceeding 37 kW but not exceeding 75 kW

8501.52.9010 For use in civil aircraft (TN100)

8501.52.9090 Other

8501.53.0000 Of an output exceeding 75 kW

8501.53.5000 Traction motors

8501.53.5010 Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics

8501.53.5020 AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with: -a torque output of 200 Nm or more, but not more than 400 Nm, -a power output of 50 kW or more, but not more than 200 kW , -a rotation speed of no more than 15 000 rpm

8501.53.5030 Permanent magnet synchronous traction motor, with: -a continuous power of 110 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 500 mm or more but not more than 650 mm, -a total width of 600 mm or more but not more than 700

8501.53.5040 Permanent magnet traction AC motor, with

8501.53.5050 Asynchronous traction motor, with: -a continuous power of 140 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 580 mm or more but not more than 730 mm, -a total width of 550 mm or more but not more than 670 mm, -a total hei

8501.53.5090 Other

8501.53.8100 Other, of an output

8501.53.8110 Of an output not exceeding 150 kW, for use in civil aircraft (TN100)

8501.53.8120 Of an output exceeding 150 kW, for use in certain types of aircraft

8501.53.8190 Other

8501.53.9400 Exceeding 375 kW but not exceeding 750 kW

8501.53.9410 For use in certain types of aircraft

8501.53.9490 Other

8501.53.9900 Exceeding 750 kW

8501.53.9910 For use in certain types of aircrafts

8501.53.9990 Other

8501.61.0000 AC generators (alternators)

8501.61.2000 Of an output not exceeding 7,5 kVA

8501.61.2010 For use in civil aircraft (TN100)

8501.61.2090 Other

8501.61.8000 Of an output exceeding 7,5 kVA but not exceeding 75 kVA

8501.61.8010 For use in civil aircraft (TN100)

8501.61.8099 Other

8501.62.0000 Of an output exceeding 75 kVA but not exceeding 375 kVA

8501.62.0010 For use in civil aircraft (TN100)

8501.62.0040 AC, 3-phase generator, with: -a continuous power of 147 kVA or more but not more than 222 kVA, -a continuous torque of 650 Nm or more but not more than 900 Nm, -a maximum working speed of 2700 revolutions per minute (rpm), -a liquid cooled system, -a leng

8501.62.0098 Other

8501.63.0000 Of an output exceeding 375 kVA but not exceeding 750 kVA

8501.63.0010 For use in civil aircraft (TN100)

8501.63.0099 Other

8501.64.0000 Of an output exceeding 750 kVA

8501.70.0000 Photovoltaic DC generators :

8501.71.0000 Of an output not exceeding 50 W

8501.72.0000 Of an output exceeding 50 W

8501.80.0000 Photovoltaic AC generators

8502.00.0000 Electric generating sets and rotary converters

Show details

8502.11.0000 Generating sets with compression-ignition internal combustion piston engines (diesel or semi-diesel engines)

8502.11.2000 Of an output not exceeding 7,5 kVA

8502.11.2010 For use in civil aircraft (TN100)

8502.11.2090 Other

8502.11.8000 Of an output exceeding 7,5 kVA but not exceeding 75 kVA

8502.11.8010 For use in civil aircraft (TN100)

8502.11.8090 Other

8502.12.0000 Of an output exceeding 75 kVA but not exceeding 375 kVA

8502.12.0010 For use in civil aircraft (TN100)

8502.12.0090 Other

8502.13.0000 Of an output exceeding 375 kVA

8502.13.2000 Of an output exceeding 375 kVA but not exceeding 750 kVA

8502.13.2010 For use in civil aircraft (TN100)

8502.13.2090 Other

8502.13.4000 Of an output exceeding 750 kVA but not exceeding 2 000 kVA

8502.13.4010 For use in civil aircraft (TN100)

8502.13.4090 Other

8502.13.8000 Of an output exceeding 2 000 kVA

8502.13.8010 For use in civil aircraft (TN100)

8502.13.8090 Other

8502.20.0000 Generating sets with spark-ignition internal combustion piston engines

8502.20.2000 Of an output not exceeding 7,5 kVA

8502.20.2010 For use in civil aircraft (TN100)

8502.20.2090 Other

8502.20.4000 Of an output exceeding 7,5 kVA but not exceeding 375 kVA

8502.20.4010 For use in civil aircraft (TN100)

8502.20.4090 Other

8502.20.6000 Of an output exceeding 375 kVA but not exceeding 750 kVA

8502.20.6010 For use in civil aircraft (TN100)

8502.20.6090 Other

8502.20.8000 Of an output exceeding 750 kVA

8502.20.8010 For use in civil aircraft (TN100)

8502.20.8090 Other

8502.31.0000 Other generating sets

8502.31.0011 Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whe

8502.31.0019 Other

8502.31.0085 Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whe

8502.31.0097 Other

8502.39.0000 Other

8502.39.2000 Turbo-generators

8502.39.2010 For use in civil aircraft (TN100)

8502.39.2090 Other

8502.39.8000 Other

8502.39.8010 For use in civil aircraft (TN100)

8502.39.8090 Other

8502.40.0000 Electric rotary converters

8502.40.0010 For use in civil aircraft (TN100)

8502.40.0090 Other

8503.00.0000 Parts suitable for use solely or principally with the machines of heading 8501 or 8502

Show details

8503.00.1000 Non-magnetic retaining rings

8503.00.1010 For use in certain types of aircraft

8503.00.1090 Other

8503.00.9100 Other

8503.00.9110 For use in certain types of aircraft

8503.00.9131 Other

8503.00.9199 Other

8503.00.9900 Other

8503.00.9910 For use in certain types of aircraft

8503.00.9931 Other

8503.00.9932 Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring

8503.00.9933 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 u(mu)m

8503.00.9934 Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 u(mu)m

8503.00.9937 Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with: - diameter of the rotor body of 17 mm or more but not more than 37 mm, - length of the rotor body of 12 mm or more but

8503.00.9943 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with o

8503.00.9955 Stator for brushless motor, with:an internal diameter of 206,6 mm (plus and minus 0,5) an external diameter of 265,0 mm (plus and minus 0,2) and a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, was

8503.00.9960 Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (A+ or -0,25 mm)

8503.00.9965 Rotor body of stacked electrical sheet having: -a diameter of 18 mm or more but not more than 35 mm, and -a length of 20 mm or more but not more than 65 mm

8503.00.9970 Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads fo

8503.00.9975 Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm

8503.00.9980 Steel motor housing having: -an inner diameter of 35 mm or more but not more than 65 mm, -an outer diameter of 35 mm or more but not more than 70 mm, and -a length of 35 mm or more but not more than 150 mm

8503.00.9999 Other

8504.00.0000 Electrical transformers, static converters (for example, rectifiers) and inductors

Show details

8504.10.0000 Ballasts for discharge lamps or tubes

8504.10.2000 Inductors, whether or not connected with a capacitor

8504.10.2010 For use in civil aircraft

8504.10.2090 Other

8504.10.8000 Other

8504.10.8010 For use in civil aircraft

8504.10.8090 Other

8504.21.0000 Liquid dielectric transformers

8504.22.0000 Having a power handling capacity exceeding 650 kVA but not exceeding 10 000 kVA

8504.22.1000 Exceeding 650 kVA but not exceeding 1 600 kVA

8504.22.9000 Exceeding 1 600 kVA but not exceeding 10 000 kVA

8504.23.0000 Having a power handling capacity exceeding 10 000 kVA

8504.31.0000 Other transformers

8504.31.2100 Measuring transformers

8504.31.2110 For use in civil aircraft

8504.31.2190 Other

8504.31.2900 Other

8504.31.2910 For use in civil aircraft

8504.31.2990 Other

8504.31.8000 Other

8504.31.8010 For use in civil aircraft

8504.31.8015 Electrical Transformer with - a capacity of 192 Watts or 216 Watts - dimensions of not more than 27,1 x 26,6 x 18 mm - an operating temperature range of - 40 degree celcius or more, but not more than + 125 degree celcius - three or four inductively couple

8504.31.8025 Electrical Transformer with - a capacity of 432 Watts - dimensions of not more than 24 mm x 21 mm x19 mm - an operating temperature range of - 20 degree celcius or more, but not more than + 85 degree celcius - two windings and - 5 connection pins at the b

8504.31.8030 Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters

8504.31.8035 Electrical Transformer with - a capacity of 433 Watts - dimensions of not more than 37,3 x 38,2 x 28,5 mm - an operating temperature range of - 40 degree celcius or more, but not more than + 125 degree celcius - four inductively coupled copper wire windin

8504.31.8045 Electrical Transformer with: - a capacity of 0,2 Watts, - dimensions of not more than 15 x 15,5 x 14 mm, - an operating temperature range of - 10 degree celcius or more, but not more than + 125 degree celcius, - two inductively coupled copper wire winding

8504.31.8050 Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry

8504.31.8055 Electrical transformer with: a capacity of 0,22 kVA or more, but not more than 0,24 kVA, an operating temperature range of + 10°C or more, but not more than + 125°C, four or five inductively coupled copper wire windings, 11 or 12 connection pins at the bo

8504.31.8090 Other

8504.32.0000 Having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA

8504.32.0010 For use in civil aircraft

8504.32.0090 Other

8504.33.0000 Having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA

8504.33.0010 For use in civil aircraft

8504.33.0090 Other

8504.34.0000 Having a power handling capacity exceeding 500 kVA

8504.40.0000 Static converters

8504.40.60 Accumulator chargers :

8504.40.6010 For use in civil aircraft

8504.40.6090 Other

8504.40.8300 Other

8504.40.8310 For use in civil aircraft

8504.40.8390 Other

8504.40.8500 Inverters

8504.40.8510 For use in civil aircraft

8504.40.8590 Other

8504.40.8600 Having a power handling capacity exceeding 7,5 kVA

8504.40.8610 For use in civil aircraft

8504.40.8690 Other

8504.40.9500 Other

8504.40.9510 For use in civil aircraft

8504.40.9590 Other

8504.50.0000 Other inductors

8504.50.0010 For use in civil aircraft

8504.50.0090 Other

8504.50.9500 Other

8504.90.0000 Parts

8504.90.1100 Other

8504.90.1300 Steel laminations and cores, whether or not stacked or wound

8504.90.1700 Other

8504.90.1800 Other

8504.90.9000 Of static converters

8504.90.9900 Other

8505.00.0000 Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagneticcouplings, clutches and brakes; electromagnetic lifting

Show details

8505.11.0000 Permanent magnets and articles intended to become permanent magnets after magnetisation

8505.11.1010 Containing neodymium, praseodymium, dysprosium or samarium

8505.11.1047 Other

8505.11.1050 Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:；-a length of 15mm or more but not more than 52mm,；-a width of 5mm or more but not more than 42mm,of a kind to be use

8505.11.1053 Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with；-a length of 97,5mm or more, but not more than 225mm；-a diameter of 19mm or more, but not more than 25mm

8505.11.1063 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with-an external diameter of not more than 45mm,-a height of not more than 45mm,of a kind used in the manufacture of permanent magnets after magnetisation

8505.11.1065 Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having；-a length of not more than 140mm,；-a width of not more than 90mm and；-a t

8505.11.1068 Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:；-a length of 13,8mm or more but not more than 45,2mm,；-a width of 7,8mm or more b

8505.11.1070 Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet；-whether or not containing a hole in the centre,；-with a diameter of not more than 90mm,of a kind used

8505.11.1073 Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:；-a

8505.11.1075 A quarter sleeve intended to become permanent magnet after magnetization,；-consisting of at least neodymium, iron and boron,；-with a width of 9,1mm or more but not more than 10,5mm,；-with a length of 20mm or more but not more than 30,1mm,of a kind used on

8505.11.1078 Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions: -a length of 200 mm or more but not more than 205 mm, -a width of 58 mm or more but not more than 62 mm, -a h

8505.11.1099 Other

8505.11.9010 Other

8505.11.9073 Other

8505.11.9075 A quarter sleeve intended to become permanent magnet after magnetization,；-consisting of at least neodymium, iron and boron,；-with a width of 9,1mm or more but not more than 10,5mm,；-with a length of 20mm or more but not more than 30,1mm,of a kind used on

8505.11.9099 Other

8505.19.0000 Other

8505.19.1000 Permanent magnets of agglomerated ferrite

8505.19.1010 For use in certain types of aircraft

8505.19.1020 Arc segments of permanent magnets of agglomerated ferrite, with: -a length of 16,8 mm or more, but not more than 110,2 mm, -a width of 14,8 mm or more, but not more than 75,2 mm, -a thickness of 4,8 mm or more, but not more than 13,2 mm, for use in the ma

8505.19.1090 Other

8505.19.9000 Other

8505.19.9010 For use in certain types of aircraft

8505.19.9030 Other

8505.19.9035 Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with: -a

8505.19.9050 Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation - whether or not with bevelled edges - of a length of 27 mm or more but not more than 32 mm (+/- 0,15 mm), - of a width of 8,5 mm or more

8505.19.9060 Article of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve to become a permanent magnet after magnetization - of a length of 30 mm or more but not more than 50 mm ( 1 mm) - of a width of 33 mm or more but not more than 55 mm ( 1 mm)

8505.19.9089 Other

8505.20.0000 Electromagnetic couplings, clutches and brakes

8505.20.0010 For use in certain types of aircraft

8505.20.0030 Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles

8505.20.0090 Other

8505.90.0000 Other, including parts

8505.90.2100 Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus other than electromagnets of heading 9018

8505.90.2900 Other

8505.90.2910 For use in certain types of aircraft

8505.90.2999 Other

8505.90.5000 Electromagnetic lifting heads

8505.90.5010 For use in certain types of aircraft

8505.90.5090 Other

8505.90.9000 Parts

8505.90.9010 For use in certain types of aircraft

8505.90.9020 Electromagnetic clutch coil in a cylindrical metal housing: -the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE, -the coil is made of copper wire, -with a weight of 0,4 kg or more but not more than 0,7 kg, -with a widt

8505.90.9090 Other

8506.00.0000 Primary cells and primary batteries

Show details

8506.10.0000 Manganese dioxide

8506.10.1100 Alkaline

8506.10.1800 Other

8506.10.9100 Other

8506.10.9800 Other

8506.30.0000 Mercuric oxide

8506.40.0000 Silver oxide

8506.50.0000 Lithium

8506.50.1000 Cylindrical cells

8506.50.1010 Lithium cylindrical primary cells with: - a diameter of 14,0 mm or more but not more than 26,0 mm; - a length of 25 mm or more but not more than 51 mm; - a voltage of 1,5 V or more, but not more than 3,6 V; - a capacity of 0,80 Ah or more, but not more th

8506.50.1090 Other

8506.50.3000 Button cells

8506.50.9000 Other

8506.50.9010 Lithium iodine single cell battery the dimensions of which do not exceed 9 mm x 23 mm x 45 mm and a voltage of not more than 2,8 V

8506.50.9030 Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm x 45 mm x 15 mm and a capacity of not less than 1,05 Ah

8506.50.9090 Other

8506.60.0000 Air-zinc

8506.80.0000 Other primary cells and primary batteries

8506.80.0500 Dry zinc-carbon batteries of a voltage of 5,5 V or more but not exceeding 6,5 V

8506.80.8000 Other

8506.90.0000 Parts

8506.90.0010 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)

8506.90.0090 Other

8507.00.0000 Electric accumulators, including separators therefor, whether or not rectangular (including square)

Show details

8507.10.0000 Lead-acid, of a kind used for starting piston engines

8507.10.2000 Working with liquid electrolyte

8507.10.2010 For use in civil aircraft

8507.10.2090 Other

8507.10.8000 Other

8507.10.8010 For use in civil aircraft

8507.10.8090 Other

8507.20.0000 Other lead-acid accumulators

8507.20.2000 Working with liquid electrolyte

8507.20.2010 For use in civil aircraft

8507.20.2090 Other

8507.20.8000 Other

8507.20.8010 For use in civil aircraft

8507.20.8090 Other

8507.30.0000 Nickel-cadmium

8507.30.2000 Hermetically sealed

8507.30.2010 For use in civil aircraft

8507.30.2090 Other

8507.30.8000 Other

8507.30.8010 For use in civil aircraft

8507.30.8090 Other

8507.50.0000 Nickel-metal hydride

8507.50.0010 For use in civil aircraft

8507.50.0090 Other

8507.60.0000 Lithium-ion

8507.60.0010 For use in civil aircraft

8507.60.0015 Cylindrical lithium-ion-accumulators or modules with: - a nominal capacity of 8,8 Ah or more, but not more than 18 Ah, - a nominal voltage of 36 V or more, but not more than 48 V, - a power of 300 Wh or more, but not more than 648 Wh, for use in the manuf

8507.60.0018 Rectangular lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:a length of not more than 1600 mm,a width of not more than 448 mm,a height of not more than 395 mm,a weight of 125 kg or more but not more tha

8507.60.0029 A lithium-ion-rechargeable battery pack in a specific housing suitable for operating in digital cameras, having:；-a length of 70mm or more but not more than 120mm,；-a width of 60mm or more but not more than 80mm,；-a height of 15mm or more but not more

8507.60.0030 Cylindrical lithium-ion accumulator or module, with a length of 63mm or more and a diameter of 17,2mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries

8507.60.0033 Lithium-ion accumulator, with: - a length of 150 mm or more, but not more than 300 mm - a width of 700 mm or more, but not more than 1 000 mm - a height of 1 100 mm or more, but not more than 1 500 mm - a weight of 75 kg or more, but not more than 160 kg

8507.60.0037 Lithium-ion accumulator, with: - a length of 1 200 mm or more, but not more than 2 000 mm - a width of 800 mm or more, but not more than 1 300 mm - a height of 2 000 mm or more, but not more than 2 800 mm - a weight of 1 800 kg or more, but not more than

8507.60.0048 Integrated battery system in a metal case with holders, consisting of: -a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh, -Battery Management System, -a power relay, -a cooling system, -four con

8507.60.0050 Modules for the assembly of batteries of ion lithium electric accumulators with: - a length of 298 mm or more, but not more than 408 mm, - a width of 33,5 mm or more, but not more than 209 mm, - a height of 138 mm or more, but not more than 228 mm, - a we

8507.60.0058 Prismatic lithium-ion electric accumulator with: -a width of 120,0 mm or more but not more than 305,0 mm, -a thickness of 12,0 mm or more but not more than 67,0 mm, -a height of 72,0 mm or more but not more than 126,0 mm, -a nominal voltage of 3,6 V or mo

8507.60.0065 Cylindrical Lithium Ion Cell with - 3,5 VDC to 3,8 VDC, - 300 mAh to 900 mAh and - a diameter of 10,0 mm to 14,5 mm

8507.60.0068 Lithium-ion accumulator in a metal housing, with a length of 65 mm or more, but not more than 225 mm, a width of 10 mm or more, but not more than 75 mm, a height of 60 mm or more, but not more than 285 mm, a nominal voltage of 2,1 V or more, but not more

8507.60.0071 Lithium-ion rechargeable batteries, with: - a length of 700 mm or more, but not more than 2 820 mm - a width of 935 mm or more, but not more than 1 660 mm - a height of 85 mm or more, but not more than 700 mm - a weight of 280 kg or more, but not more tha

8507.60.0073 Lithium-ion Electric accumulators consisting of 3 modules containing 102 cells in total, with

8507.60.0077 Lithium-ion rechargeable batteries, with: -a length of 700 mm or more, but not more than 2 820 mm, -a width of 935 mm or more, but not more than 1 660 mm, -a height of 85 mm or more, but not more than 700 mm, -a weight of 250 kg or more, but not more than

8507.60.0083 Modules for the assembly of ion lithium electric accumulators with:

8507.60.0088 A rechargeable lithium-ion battery, with:

8507.60.0090 Other

8507.80.0000 Other accumulators

8507.80.0010 For use in civil aircraft

8507.80.0090 Other

8507.90.0000 Parts

8507.90.3000 Separators

8507.90.3010 For use in civil aircraft

8507.90.3090 Other

8507.90.8000 Other

8507.90.8010 For use in civil aircraft

8507.90.8020 Top cap made of ferrous alloy or stainless steel:；-whether or not including parts made of aluminum and aluminum alloy,；-with sealing elements or other elements made of polymer material,；-witha current interrupt device and an evacuation valve,；-with an out

8507.90.8090 Other

8508.00.0000 Vacuum cleaners

Show details

8508.11.0000 With self-contained electric motor

8508.19.0000 Other

8508.60.0000 Other vacuum cleaners

8508.70.0000 Parts

8508.70.0020 Electronic circuit cards that - are connected by wire or radio frequency to each other and the motor controller card, and - regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, - whether or

8508.70.0090 Other

8509.00.0000 Electromechanical domestic appliances, with self-contained electric motor, other than vacuum cleaners of heading 8508

Show details

8509.40.0000 Food grinders and mixers; fruit or vegetable juice extractors

8509.80.0000 Other appliances

8509.90.0000 Parts

8510.00.0000 Shavers, hair clippers and hair-removing appliances, with self-contained electric motor

Show details

8510.10.0000 Shavers

8510.20.0000 Hair clippers

8510.30.0000 Hair-removing appliances

8510.90.0000 Parts

8511.00.0000 Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (f

Show details

8511.10.0000 Sparking plugs

8511.10.0010 For use in civil aircraft

8511.10.0090 Other

8511.20.0000 Ignition magnetos; magneto-dynamos; magnetic flywheels

8511.20.0010 For use in civil aircraft

8511.20.0090 Other

8511.30.0000 Distributors; ignition coils

8511.30.0010 For use in civil aircraft

8511.30.0030 Igniter integrated coil assembly with: - an igniter, - a coil on plug assembly with an integrated mounting bracket, - a housing, - a length of 90 mm or more but not more than200 mm (+/- 5 mm), - an operating temperature of -40 degree C or more but not mor

8511.30.0055 Ignition coil: - with a length of 50 mm or more, but not more than 200 mm, - with an operating temperature of - 40 degree celcius or more, but not more than 140 degree celcius, and - with a voltage of 9 V or more, but not more than 16 V, - with or without

8511.30.0090 Other

8511.40.0000 Starter motors and dual purpose starter-generators

8511.40.0010 For use in civil aircraft

8511.40.0090 Other

8511.50.0000 Other generators

8511.50.0010 For use in civil aircraft

8511.50.0090 Other

8511.80.0000 Other equipment

8511.80.0010 For use in civil aircraft

8511.80.0090 Other

8511.90.0000 Parts

8511.90.0010 For use in certain types of aircraft

8511.90.0090 Other

8512.00.0000 Electrical lighting or signalling equipment (excluding articles of heading 8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles

Show details

8512.10.0000 Lighting or visual signalling equipment of a kind used on bicycles

8512.20.0000 Other lighting or visual signalling equipment

8512.20.0030 Lighting module, containing at least: - two LEDs, - glass or plastic lenses, focusing/scattering the light emitted by the LEDs, - reflectors redirecting the light emitted by the LEDs, in an aluminium housing with a radiator, mounted at a bracket with an a

8512.20.0040 Fog lamp with a galvanised inner surface, containing: - a plastic holder with three or more brackets, - one or more 12 V bulbs, - a connector, - a plastic cover, - whether or not with a connection cable for use in the manufacture of goods of Chapter 87

8512.20.0060 Information screen displaying: -at least time, date and status of safety features in a vehicle, or -safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit, with an operating voltage of 12 V or

8512.20.0070 Electrical component with light guide integrated with LED, for motor vehicles with:；-two parallel ribs in the front area with a distance between them of 1,4mm or more but not more than 1,8mm,；-four holes with the dimension of 7,3mm or more but not more th

8512.20.0080 Grab handle light with integrated LED, for motor vehicles:；-a distance between integrated spring clip and surface of 0,85mm or more but not more than 1,85mm,；-a length of the housing to two front vertical ribs of 26,45mm or more but not more than26,75mm,

8512.20.0090 Other

8512.30.0000 Sound signalling equipment

8512.30.1000 Burglar alarms of a kind used for motor vehicles

8512.30.9000 Other

8512.30.9010 Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: - coil, - magnet, - metal membrane, - connector, - holder of a kind used in the manufacture of goods of Chapter 87

8512.30.9020 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: - a printed circuit board, - a connector, - whether or not a metal holder of a kind used in the manufacture of goods of chapter 87

8512.30.9030 Sound alarm device for protection against burglary into the vehicle:- with an operating temperature of - 45 degree celcius or more, but not more than + 95 degree celcius,- with a voltage of 9 V or more but not more than 16 V,- in a plastic housing,- wheth

8512.30.9040 Device for simulating engine sound at reduced speed of a hybrid or electric vehicle: -containing at least printed circuit board and loudspeaker, -in a plastic housing with a holder,for use in the manufacture of goods of Chapter 87

8512.30.9090 Other

8512.40.0000 Windscreen wipers, defrosters and demisters

8512.40.0010 Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides

8512.40.0090 Other

8512.90.0000 Parts

8512.90.1000 Of apparatus of subheading 8512 30 10

8512.90.9000 Other

8513.00.0000 Portable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading 8512

Show details

8513.10.0000 Lamps

8513.90.0000 Parts

8514.00.0000 Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss

Show details

8514.10.0000 Resistance heated furnaces and ovens

8514.11.0000 Hot isostatic presses

8514.19.0000 Other

8514.19.1000 Bakery and biscuit ovens

8514.19.8000 Other

8514.20.0000 Furnaces and ovens functioning by induction or dielectric loss

8514.20.1000 Induction furnaces and ovens

8514.20.8000 Dielectric furnaces and ovens

8514.20.8010 Cavity assembly comprising at least: - a transformer with an input of not more than 240 V and an output of not more than 3 000 W - an AC or DC fan motor with an output of not more than42 watts - a housing made of stainless steel - with or without a magnet

8514.20.8090 Other

8514.30.0000 Other furnaces and ovens

8514.31.0000 Electron beam furnaces :

8514.31.1000 Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

8514.31.9000 Other

8514.32.0000 Plasma and vacuum arc furnaces :

8514.32.1000 Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

8514.32.9000 Other

8514.39.0000 Other

8514.39.1000 Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

8514.39.9000 Other

8514.40.0000 Other equipment for the heat treatment of materials by induction or dielectric loss

8514.90.0000 Parts

8514.90.3000 Of other furnaces and ovens of subheading 8514 30 20

8514.90.7000 Other

8515.00.0000 Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whetheror not capable of cutting; electric machines and appara

Show details

8515.11.0000 Brazing or soldering machines and apparatus

8515.19.0000 Other

8515.19.1000 Wave soldering machines of a kind used solely or principally for the manufacture of printed circuit assemblies

8515.19.9000 Other

8515.21.0000 Machines and apparatus for resistance welding of metal

8515.29.0000 Other

8515.31.0000 Machines and apparatus for arc (including plasma arc) welding of metals

8515.39.0000 Other

8515.39.1300 For manual welding with coated electrodes, complete with welding or cutting devices, and consigned with

8515.39.1800 Generators or rotary converters or static converters, rectifiers or rectifying apparatus

8515.39.9000 Other

8515.80.0000 Other machines and apparatus

8515.80.1000 For treating metals

8515.80.9000 Other

8515.90.0000 Parts

8515.90.2000 Of wave soldering machines of subheading 8515 19 10

8515.90.8000 Other

8515.90.8011 Consigned from Laos

8515.90.8012 Consigned from Thailand

8515.90.8013 Consigned from India

8515.90.8020 Other

8515.90.8030 Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads fo

8515.90.8040 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with o

8515.90.8090 Other

8516.00.0000 Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers, haircurlers, curling tong heaters) and hand dryers; electri

Show details

8516.10.0000 Electric instantaneous or storage water heaters and immersion heaters

8516.10.1100 Instantaneous water heaters

8516.10.8000 Other

8516.10.8010 Tubular Heating Element with mounting flange for washing machines, with:；-a nominal output power of 1700W at 230V AC supply voltage,；-a weight of 230g or more but not more than 250g,；-a thickness of the external flange of 2mm or more,；-isolation bushes of

8516.10.8090 Other

8516.21.0000 Electric space-heating apparatus and electric soil-heating apparatus

8516.29.0000 Other

8516.29.1000 Liquid-filled radiators

8516.29.5000 Convection heaters

8516.29.9100 Other

8516.29.9900 Other

8516.31.0000 Electrothermic hairdressing or hand-drying apparatus

8516.32.0000 Other hairdressing apparatus

8516.33.0000 Hand-drying apparatus

8516.40.0000 Electric smoothing irons

8516.50.0000 Microwave ovens

8516.50.0010 Cavity assembly comprising at least: - a transformer with an input of not more than 240 V and an output of not more than 3 000 W - an AC or DC fan motor with an output of not more than 42 watts - a housing made of stainless steel - with or without a magne

8516.50.0090 Other

8516.60.0000 Other ovens; cookers, cooking plates, boiling rings; grillers and roasters

8516.60.1000 Cookers (incorporating at least an oven and a hob)

8516.60.5000 Cooking plates, boiling rings and hobs

8516.60.7000 Grillers and roasters

8516.60.8000 Ovens for building in

8516.60.8010 Cavity assembly comprising at least: - a transformer with an input of not more than 240 V and an output of not more than 3 000 W - an AC or DC fan motor with an output of not more than42 watts - a housing made of stainless steel - with or without a magnet

8516.60.8090 Other

8516.60.9000 Other

8516.71.0000 Other electrothermic appliances

8516.72.0000 Toasters

8516.79.0000 Other

8516.79.2000 Deep fat fryers

8516.79.7000 Other

8516.79.7010 Ironing boards, including sleeve boards, whether or not free standing, with a steam soaking and/or heating top and/or blowing top

8516.79.7090 Other

8516.80.0000 Electric heating resistors

8516.80.2000 Assembled with an insulated former

8516.80.2010 Assembled only with a simple insulated former and electrical connections, used for anti-icing or de-icing, for use in civil aircraft

8516.80.2020 Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides

8516.80.2090 Other

8516.80.8000 Other

8516.90.0000 Parts

8516.90.0010 For heating aircraft and wing surfaces, mounted on propeller aeroplanes, and for use in certain types of aircraft

8516.90.0051 Other

8516.90.0060 Ventilation sub-assembly of an electric deep-fat fryer: - fitted with a motor having a power rating of 8 W at 4 600 rpm, - governed by an electronic circuit, - operating at ambient temperatures above 110 degree C, - fitted with a thermoregulator

8516.90.0070 Inner pot - containing side and central openings, - of annealed aluminium, - with a ceramic coating, heat resistant to more than 200 degree C for use in the manufacture of an electric fryer

8516.90.0080 Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 6080

8516.90.0099 Other

8517.00.0000 Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a lo

Show details

8517.10.0000 Telephone sets, including telephones for cellular networks or for other wireless networks

8517.11.0000 Line telephone sets with cordless handsets

8517.13.0000 Smartphones

8517.14.0000 Other telephones for cellular networks or for other wireless networks

8517.18.0000 Other

8517.60.0000 Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network)

8517.61.0000 Base stations

8517.62.0000 Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus

8517.69.0000 Other

8517.69.1000 Videophones

8517.69.2000 Entry-phone systems

8517.69.3000 Reception apparatus for radio-telephony or radio-telegraphy

8517.69.9000 Other

8517.70.0000 Parts

8517.71.0000 Aerials and aerial reflectors of all kinds; parts suitable for use therewith

8517.79.0000 Other

8518.00.0000 Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone andone or more loudspeakers; audio-frequency electric ampli

Show details

8518.10.0000 Microphones and stands therefor

8518.10.0010 For use in civil aircraft

8518.10.0090 Other

8518.10.3000 Microphones having a frequency range of 300 Hz to 3,4 kHz, of a diameter not exceeding 10 mm and a height not exceeding 3 mm, of a kind used for telecommunications

8518.10.9500 Other

8518.21.0000 Loudspeakers, whether or not mounted in their enclosures

8518.22.0000 Multiple loudspeakers, mounted in the same enclosure

8518.22.0010 For use in civil aircraft

8518.22.0090 Other

8518.29.0000 Other

8518.29.0010 For use in civil aircraft

8518.29.0090 Other

8518.29.3000 Loudspeakers having a frequency range of 300 Hz to 3,4 kHz, of a diameter not exceeding 50 mm, of a kind used for telecommunications

8518.29.9500 Other

8518.30.0000 Headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers

8518.30.0010 For use in civil aircraft

8518.30.0090 Other

8518.30.9500 Other

8518.40.0000 Audio-frequency electric amplifiers

8518.40.0010 For use in civil aircraft

8518.40.0090 Other

8518.50.0000 Electric sound amplifier sets

8518.50.0010 For use in civil aircraft

8518.50.0090 Other

8518.90.0000 Parts

8519.00.0000 Sound recording or sound reproducing apparatus

Show details

8519.20.0000 Apparatus operated by coins, banknotes, bank cards, tokens or by other means of payment

8519.20.1000 Coin- or disc-operated record-players

8519.20.9100 Other

8519.20.9900 Other

8519.20.9910 Music reproducers and automatic announcers, for use in certain types of aircraft

8519.20.9990 Other

8519.30.0000 Turntables (record-decks)

8519.81.0000 Other apparatus

8519.81.0010 For use in civil aircraft

8519.81.0090 Other

8519.89.0000 Other

8521.00.0000 Video recording or reproducing apparatus, whether or not incorporating a video tuner

Show details

8521.10.0000 Magnetic tape-type

8521.10.2000 Using tape of a width not exceeding 1,3 cm and allowing recording or reproduction at a tape speed not exceeding 50 mm per second

8521.10.9500 Other

8521.10.9510 For use in civil aircraft

8521.10.9590 Other

8521.90.0000 Other