HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10
Non-alloy pig iron containing by weight 0.5 % or less of phosphorus
7201.10.010
Containing less than 1.2% by weight of silicon and not more than 0.04% by weight of phosphorus
7201.10.091
Containing by weight less than 1.6% of silicon
7201.10.099
Other
7201.20.000
Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
7201.50.000
Alloy pig iron; spiegeleisen
7202
Ferro-alloys
Show details
7202.11.000
Containing by weight more than 2 % of carbon
7202.19.000
Other
7202.21.000
Containing by weight more than 55 % of silicon
7202.29.000
Other
7202.30.000
Ferro-silico-manganese
7202.41.000
Containing by weight more than 4 % of carbon
7202.49.000
Other
7202.50.000
Ferro-silico-chromium
7202.60
Ferro-nickel
7202.60.010
Containing by weight less than 33% of nickel
7202.60.090
Other
7202.70.000
Ferro-molybdenum
7202.80
Ferro-tungsten and ferro-silico-tungsten
7202.80.010
Ferro-tungsten
7202.80.020
Ferro-silico-tungsten
7202.91.000
Ferro-titanium and ferro-silico-titanium
7202.92.000
Ferro-vanadium
7202.93.000
Ferro-niobium
7202.99
Other
7202.99.010
Ferro-phosphorus
7202.99.090
Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
Show details
7203.10.000
Ferrous products obtained by direct reduction of iron ore
7203.90.000
Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
7204.10.000
Waste and scrap of cast iron
7204.21.000
Of stainless steel
7204.29.000
Other
7204.30.000
Waste and scrap of tinned iron or steel
7204.41.000
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49.000
Other
7204.50
Remelting scrap ingots
7204.50.010
Of alloy steel
7204.50.020
Other
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.000
Granules
7205.21
Of alloy steel
7205.21.010
Containing not less than 1% but less than 5% by weight of nickel
7205.21.090
Other
7205.29.000
Other
7206
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
Show details
7206.10
Ingots
7206.10.010
Containing by weight less than 0.6 % of carbon
7206.10.020
Other
7206.90
Other
7206.90.010
Containing by weight less than 0.6 % of carbon
7206.90.020
Other
7207
Semi-finished products of iron or non-alloy steel
Show details
7207.11.000
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207.12.000
Other, of rectangular (other than square) cross-section
7207.19.000
Other
7207.20
Containing by weight 0.25 % or more of carbon
7207.20.011
Billets
7207.20.012
Slabs
7207.20.019
Other
7207.20.020
Other
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10
In coils, not further worked than hot-rolled, with patterns in relief
7208.10.010
Containing by weight less than 0.6 % of carbon
7208.10.021
Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208.10.029
Other
7208.25
Of a thickness of 4.75 mm or more
7208.25.011
Of a thickness of less than 6 mm
7208.25.019
Other
7208.25.020
Having a minimum yield point of 355 MPa
7208.25.030
Other
7208.26
Of a thickness of 3 mm or more but less than 4.75 mm
7208.26.011
High tensile steel of a tensile strength of 490 MPa or more
7208.26.019
Other
7208.26.021
Having a minimum yield point of 355 MPa
7208.26.029
Other
7208.27
Of a thickness of less than 3 mm
7208.27.011
High tensile steel of a tensile strength of 490 MPa or more
7208.27.019
Other
7208.27.021
Having a minimum yield point of 275 MPa
7208.27.029
Other
7208.36
Of a thickness exceeding 10 mm
7208.36.010
Containing by weight less than 0.6 % of carbon
7208.36.021
Having a minimum yield point of 355 MPa
7208.36.029
Other
7208.37
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.37.011
Of a thickness of less than 6 mm
7208.37.019
Other
7208.37.020
Having a minimum yield point of 355 MPa
7208.37.030
Other
7208.38
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.010
Containing by weight less than 0.6 % of carbon
7208.38.021
Having a minimum yield point of 355 MPa
7208.38.029
Other
7208.39
Of a thickness of less than 3 mm
7208.39.010
Containing by weight less than 0.6 % of carbon
7208.39.021
Having a minimum yield point of 275 MPa
7208.39.029
Other
7208.40
Not in coils, not further worked than hot-rolled, with patterns in relief
7208.40.010
Containing by weight less than 0.6 % of carbon
7208.40.020
Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208.40.030
Other
7208.51
Of a thickness exceeding 10 mm
7208.51.011
Of a thickness of not exceeding 50 mm
7208.51.019
Of a thickness exceeding 50 mm
7208.51.021
Of a thickness of not exceeding 50 mm
7208.51.029
Of a thickness exceeding 50 mm
7208.51.031
Of a thickness of not exceeding 50 mm
7208.51.039
Of a thickness exceeding 50 mm
7208.52
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.52.011
Of a thickness of less than 6 mm
7208.52.019
Other
7208.52.021
Of a thickness of less than 6 mm
7208.52.029
Other
7208.52.031
Of a thickness of less than 6 mm
7208.52.039
Other
7208.53
Of a thickness of 3 mm or more but less than 4.75 mm
7208.53.010
Containing by weight less than 0.6 % of carbon
7208.53.021
Having a minimum yield point of 355 MPa
7208.53.029
Other
7208.54
Of a thickness of less than 3 mm
7208.54.010
Containing by weight less than 0.6 % of carbon
7208.54.021
Having a minimum yield point of 275 MPa
7208.54.029
Other
7208.90.000
Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Show details
7209.15
Of a thickness of 3 mm or more
7209.15.010
Containing by weight less than 0.6 % of carbon
7209.15.021
Having a minimum yield point of 355 MPa
7209.15.029
Other
7209.16
Of a thickness exceeding 1 mm but less than 3 mm
7209.16.011
High tensile steel of a tensile strength of 340 MPa or more
7209.16.019
Other
7209.16.021
Having a minimum yield point of 275 MPa
7209.16.029
Other
7209.17
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.17.011
High tensile steel of a tensile strength of 340 MPa or more
7209.17.019
Other
7209.17.021
Having a minimum yield point of 275 MPa
7209.17.029
Other
7209.18
Of a thickness of less than 0.5 mm
7209.18.010
Containing by weight less than 0.6 % of carbon
7209.18.021
Having a minimum yield point of 275 MPa
7209.18.029
Other
7209.25
Of a thickness of 3 mm or more
7209.25.010
Containing by weight less than 0.6 % of carbon
7209.25.021
Having a minimum yield point of 355 MPa
7209.25.029
Other
7209.26
Of a thickness exceeding 1 mm but less than 3 mm
7209.26.010
Containing by weight less than 0.6 % of carbon
7209.26.021
Having a minimum yield point of 275 MPa
7209.26.029
Other
7209.27
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.27.010
Containing by weight less than 0.6 % of carbon
7209.27.021
Having a minimum yield point of 275 MPa
7209.27.029
Other
7209.28
Of a thickness of less than 0.5 mm
7209.28.010
Containing by weight less than 0.6 % of carbon
7209.28.021
Having a minimum yield point of 275 MPa
7209.28.029
Other
7209.90.000
Other
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
Show details
7210.11.000
Of a thickness of 0.5 mm or more
7210.12.000
Of a thickness of less than 0.5 mm
7210.20.000
Plated or coated with lead, including terne-plate
7210.30
Electrolytically plated or coated with zinc
7210.30.010
Containing by weight less than 0.6 % of carbon
7210.30.021
Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7210.30.029
Other
7210.41.000
Corrugated
7210.49
Other
7210.49.010
Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7% or more of iron in the entire layers)
7210.49.090
Other
7210.50
Plated or coated with chromium oxides or with chromium and chromium oxides
7210.50.010
Tinfree steel
7210.50.090
Other
7210.61.000
Plated or coated with aluminium-zinc alloys
7210.69.000
Other
7210.70.000
Painted, varnished or coated with plastics
7210.90
Other
7210.90.010
Containing by weight less than 0.6 % of carbon
7210.90.020
Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.13
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211.13.010
Containing by weight less than 0.6 % of carbon
7211.13.021
Having a minimum yield point of 355 MPa
7211.13.029
Other
7211.14
Other, of a thickness of 4.75 mm or more
7211.14.010
Containing by weight less than 0.6 % of carbon
7211.14.021
Having a minimum yield point of 355 MPa
7211.14.029
Other
7211.19
Other
7211.19.010
Containing by weight less than 0.6 % of carbon
7211.19.021
Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211.19.029
Other
7211.23.000
Containing by weight less than 0.25 % of carbon
7211.29
Other
7211.29.010
Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211.29.090
Other
7211.90.000
Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
Show details
7212.10.000
Plated or coated with tin
7212.20
Electrolytically plated or coated with zinc
7212.20.010
Containing by weight less than 0.6 % of carbon
7212.20.021
Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7212.20.029
Other
7212.30.000
Otherwise plated or coated with zinc
7212.40.000
Painted, varnished or coated with plastics
7212.50
Otherwise plated or coated
7212.50.010
Tinfree steel
7212.50.090
Other
7212.60
Clad
7212.60.010
Containing by weight less than 0.6 % of carbon
7212.60.020
Other
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
Show details
7213.10.000
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20.000
Other, of free-cutting steel
7213.91
Of circular cross-section measuring less than 14 mm in diameter
7213.91.011
Measuring less than 6 mm in diameter
7213.91.019
Other
7213.91.020
Other
7213.91.090
Other
7213.99
Other
7213.99.020
Containing by weight less than 0.6 % of carbon
7213.99.090
Other
7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Show details
7214.10.000
Forged
7214.20.000
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.30.000
Other, of free-cutting steel
7214.91
Of rectangular (other than square) cross-section
7214.91.020
Containing by weight less than 0.6 % of carbon
7214.91.090
Other
7214.99
Other
7214.99.020
Containing by weight less than 0.6 % of carbon
7214.99.090
Other
7215
Other bars and rods of iron or non-alloy steel
Show details
7215.10.000
Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.50
Other, not further worked than cold-formed or cold-finished
7215.50.010
Containing by weight less than 0.25% of carbon
7215.50.019
Other
7215.50.090
Other
7215.90
Other
7215.90.010
Containing by weight less than 0.6 % of carbon
7215.90.020
Other
7216
Angles, shapes and sections of iron or non-alloy steel
Show details
7216.10.000
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.000
L sections
7216.22.000
T sections
7216.31.000
U sections
7216.32.000
sections
7216.33.000
H sections
7216.40.000
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.50.000
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.61.000
Obtained from flat-rolled products
7216.69.000
Other
7216.91.000
Cold-formed or cold-finished from flat-rolled products
7216.99.000
Other
7217
Wire of iron or non-alloy steel
Show details
7217.10
Not plated or coated, whether or not polished
7217.10.010
Containing by weight less than 0.25% of carbon
7217.10.019
Other
7217.10.090
Other
7217.20
Plated or coated with zinc
7217.20.010
Of any cross sectional dimension not exceeding 1.5 mm
7217.20.011
Other, plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, of circular or oval cross-section
7217.20.019
Other
7217.20.090
Other
7217.20.099
Other
7217.30
Plated or coated with other base metals
7217.30.011
Solid wire for gas sealed arc welding
7217.30.019
Other
7217.30.090
Other
7217.30.099
Other
7217.90
Other
7217.90.011
Containing by weight less than 0.25% of carbon
7217.90.019
Other
7217.90.090
Other
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Show details
7218.10.000
Ingots and other primary forms
7218.91.000
Of rectangular (other than square) cross-section
7218.99.000
Other
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.11.000
Of a thickness exceeding 10 mm
7219.12
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.12.011
Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
7219.12.027
Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.12.028
Other
7219.12.029
Other
7219.13
Of a thickness of 3 mm or more but less than 4.75 mm
7219.13.011
Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
7219.13.027
---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.13.028
Other
7219.13.029
Other
7219.14.000
Of a thickness of less than 3 mm
7219.21.000
Of a thickness exceeding 10 mm
7219.22.000
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23.000
Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.000
Of a thickness of less than 3 mm
7219.31.000
Of a thickness of 4.75 mm or more
7219.32
Of a thickness of 3 mm or more but less than 4.75 mm
7219.32.011
Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.32.022
Containing by weight 7% or more but less than 10% of nickel
7219.32.023
Containing by weight 10% or more of nickel
7219.32.027
Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.32.028
Other
7219.33
Of a thickness exceeding 1 mm but less than 3 mm
7219.33.012
Containing by weight less than 12 % of chromium
7219.33.013
Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.33.022
Containing by weight 7% or more but less than 10% of nickel
7219.33.023
Containing by weight 10% or more of nickel
7219.33.027
Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.33.028
Other
7219.34
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.34.012
Containing by weight less than 12 % of chromium
7219.34.013
Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.34.022
Containing by weight 7% or more but less than 10% of nickel
7219.34.023
Containing by weight 10% or more of nickel
7219.34.027
Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.34.028
Other
7219.35
Of a thickness of less than 0.5 mm
7219.35.011
Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.35.022
Containing by weight 7% or more but less than 10% of nickel
7219.35.023
Containing by weight 10% or more of nickel
7219.35.027
Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.35.028
Other
7219.90.000
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.11.000
Of a thickness of 4.75 mm or more
7220.12.000
Of a thickness of less than 4.75 mm
7220.20
Not further worked than cold-rolled (cold-reduced)
7220.20.011
Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7220.20.027
Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7220.20.028
Other
7220.20.029
Other
7220.90.000
Other