HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10.01
Non-alloy pig iron containing in weight 0.5 % or less of phosphorus
7201.20.01
Non-alloy pig iron containing in weight more than 0.5 % of phosphorus
7201.50
Alloy pig iron; spiegeleisen
7201.50.01
Alloy pig iron
7201.50.99
Other
7202
FERRO-ALLOYS
Show details
7202.11.01
Containing in weight more than 2 % of carbon
7202.19.99
Other
7202.21
Containing by weight more than 55 % of silicon
7202.21.01
Ferrosilicon- zirconium or ferrosilicon- manganese - zirconium
7202.21.99
Other
7202.29.99
Other
7202.30.01
Ferro-silico-Manganese
7202.41.01
Containing in weight more than 4 % of carbon
7202.49.99
Other
7202.50.01
Ferro-silico-chromium
7202.60.01
Ferro-Nickel
7202.70.01
Ferro-Molybdenum
7202.80.01
Ferro-tungsten and Ferro-silico-tungsten
7202.91
Ferro-titanium and Ferro-silico-titanium
7202.91.01
Ferrotitanium, capsuled
7202.91.02
Ferrosilicon titanium
7202.91.03
Ferrotitanium, other that described in the subheading 7202.91.01
7202.92
Ferro-Vanadium
7202.92.01
Ferrovanadium, capsuled
7202.92.99
Other
7202.93.01
Ferro-niobium
7202.99
Other
7202.99.01
Ferrosilicon, except the included in the subheading 7202.99.02
7202.99.02
Ferro calcium, Ferro calcium aluminum, ferro-calcium-silicon, capsuled
7202.99.03
Ferro phosphorus; ferroborium
7202.99.99
Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
Show details
7203.10.01
Ferrous Products obtained by Direct reduction Of Iron ore
7203.90.99
Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
7204.10.01
waste and scrap Of cast Iron
7204.21.01
Of stainless steel
7204.29.99
Other
7204.30.01
waste and scrap Of tinned Iron or steel
7204.41.01
Turnings, shavings, chips, milling waste, Sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49.99
Other
7204.50.01
Remelting scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.01
granules
7205.21.01
Of alloy steel
7205.29.99
Other
7206
IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCLUDING IRON OF HEADING 72.03)
Show details
7206.10.01
ingots
7206.90.99
Other
7207
SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL
Show details
7207.11.01
Of rectangular (including square) cross-section, the width Measuring less than twice the thickness
7207.12
Other, Of rectangular (Other than square) cross-section
7207.12.01
Having a thickness not exceeding 185 mm
7207.12.99
Other
7207.19.99
Other
7207.20
Containing by weight 0.25 % or more of carbon
7207.20.01
Having a thickness not exceeding 203 mm, and a width not less than double the thickness
7207.20.99
Other
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10
in coils, not further worked than hot-Rolled, with patterns in relief
7208.10.01
Of a thickness of more of 10 mm
7208.10.02
Of a thickness of more of 4.75 mm but not more than 10 mm
7208.10.04
Thickness less than 4.75 mm, without stripping
7208.10.99
Other
7208.25
Of a thickness of 4.75 mm or more
7208.25.01
Of thickness of more than 10 mm
7208.25.99
Other
7208.26.01
Of a thickness of 3 mm or more but less than 4.75 mm
7208.27.01
Of a thickness of less than 3 mm
7208.36.01
Of a thickness exceeding 10 mm
7208.37.01
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.38.01
Of a thickness of 3 mm or more but less than 4.75 mm
7208.39.01
Of a thickness of less than 3 mm
7208.40
not in coils, not further worked than hot-Rolled, with patterns in relief
7208.40.01
Of a thickness of more than 4.75 mm
7208.40.99
Other
7208.51
Of a thickness exceeding 10 mm
7208.51.01
Of a thickness of more than 10 mm
7208.51.02
Steel plates with a thickness exceeding 10 mm, SHT-80 grades, SHT-110, AR-400, SMM-400 or A-516
7208.51.03
Steel plates with a thickness exceeding 70 mm, A-36 grade
7208.52.01
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.53.01
Of a thickness of 3 mm or more but less than 4.75 mm
7208.54.01
Of a thickness of less than 3 mm
7208.90.99
Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Show details
7209.15
Of a thickness of 3 mm or more
7209.15.01
Of a thickness of a 3 mm or more
7209.15.02
Steel whose resistance to deformation is equal to or greater than 355 MPa
7209.15.03
Steel for porcenalizing exposed parts
7209.15.99
Other
7209.16.01
Of a thickness exceeding 1 mm but less than 3 mm
7209.17.01
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.18.02
With a thickness less than 0.361 mm (black plate)
7209.18.99
Others
7209.25.01
Of a thickness of 3 mm or more
7209.26.01
Of a thickness exceeding 1 mm but less than 3 mm
7209.27.01
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.28.01
Of a thickness of less than 0.5 mm
7209.90.99
Other
7210
FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 mm OR MORE, CLAD, PLATED OR COATED
Show details
7210.11.01
Of a thickness of 0.5 mm or more
7210.12
Of a thickness of less than 0.5 mm
7210.12.01
Of a thickness of 0.20 mm or more, which first two digits of temple code are T2, T3, T4, and t5, according to the international standard ASTM A623 for single reduced products, or its equivalent in other standards
7210.12.02
Which two first digits of the designation code of mechanical characteristics are DR, according to the international standard ASTM A623 for double reduced products, or its equivalent in other standards
7210.12.03
Brass coated sheets, having a thickness not less than 0.20 mm; and as first two coding digits T2, T3, T4 and T5; of the kind designed only for dry batteries covers and bottoms manufacturing
7210.12.99
Other
7210.20.01
plated or coated with lead, including terne-plate
7210.30
Electrolytically plated or coated with zinc
7210.30.01
Sheets plated with zinc by both sides
7210.30.99
Other
7210.41
corrugated
7210.41.01
Sheets plated with zinc by both sides
7210.41.99
Other
7210.49
Other
7210.49.03
In less than 3 mm thickness, which limit the deformation resistance is equal to or greater than 275 MPa, or thickness equal to or greater than 3 mm, the limit of resistance to deformation is equal to or greater than 355 MPa
7210.49.99
Other
7210.50
plated or coated with chromium oxides or with chromium and chromium oxides
7210.50.01
With a thickness of 0.20 mm or more, which first two digits of temple code are "T2", "T3", "T4" and "T5", according to the international standard ASTM A623 for single reduced products, or its equivalent in other standards
7210.50.02
Which first two digits of the designation code of mechanical characteristics are 'DR', according to the international standard ASTM A623 for double reduced products, or its equivalent in other standards
7210.50.99
Other
7210.61.01
plated or coated with aluminum-zinc alloys
7210.69
Other
7210.69.01
Coated with non-alloyed aluminum, known as "aluminized"
7210.69.99
Other
7210.70
Painted, varnished or coated with plastics
7210.70.03
Painted sheets, galvanized by immersion
7210.70.04
No metallic or plated coating
7210.70.05
Electrolytically galvanized
7210.70.91
The others, galvanized by immersion
7210.70.99
Other
7210.90
Other
7210.90.01
Plated with stainless steel
7210.90.91
The others plated
7210.90.99
Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.13.01
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211.14
Other, of a thickness of 4.75 mm or more
7211.14.01
Strips
7211.14.02
Hot flat-rolled products of a thickness of 4.75 mm or more but less than 12 mm
7211.14.04
Rolled up
7211.14.99
Other
7211.19
Other
7211.19.01
Of a thickness of less than 4.75 mm
7211.19.02
Hot flat- rolled, with a thickness of 1.9 mm or more, but less than 4.75 mm
7211.19.03
Coils
7211.19.04
Hot flat-rolled, with a width of more than 500 mm but less than 600 mm. And a thickness of 1.9 mm or more but less than 4.75 mm
7211.19.99
Other
7211.23
Containing by weight less than 0.25 % of carbon
7211.23.01
Of a thickness of 0.05 mm. or more
7211.23.02
Cold- flat-rolled, of a thickness of 0.46 mm or more but not exceeding 3.4 mm
7211.23.99
Other
7211.29
Other
7211.29.01
Of a thickness of 0.05 mm or more, containing less than 0.6%.of carbon
7211.29.02
Containing 0.6% or more of carbon
7211.29.03
Cold rolled-flat, of a thickness of 0.46 mm or more, but not exceeding 3.4 mm
7211.29.99
Other
7211.90.99
Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
Show details
7212.10
plated or coated with tin
7212.10.01
Plated or coated with tin
7212.10.02
Clad with tin
7212.10.99
Other
7212.20
Electrolytically plated or coated with zinc
7212.20.01
Strips
7212.20.02
Coated by both sides, of a width exceeding 500 mm
7212.20.99
Other
7212.30
otherwise plated or coated with zinc
7212.30.01
Strips
7212.30.02
Coated by both sides with zinc, of a width exceeding 500 mm
7212.30.99
Other
7212.40
Painted, varnished or coated with plastics
7212.40.01
Clads coated with silicone varnish
7212.40.02
Of a total thickness of 0.075 mm or more, but not exceeding e 0.55 mm coated with plastic by one or both sides
7212.40.03
Covered by both sides with zinc, with a width of 500 mm or more
7212.40.99
Other
7212.50.01
otherwise plated or coated
7212.60
clad
7212.60.01
Unworked, chromium plated, clads
7212.60.02
Strips coated with electrolytic copper by both sides and polished with a copper proportion not exceeding 5%, having a width not exceeding 100 mm and a thickness not exceeding 0.6 mm
7212.60.03
Clad plated with stainless steel
7212.60.99
Other
7213
BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL
Show details
7213.10.01
containing indentations, ribs, grooves or Other deformations produced during the rolling process
7213.20.01
Other, Of free-cutting steel
7213.91
Of circular cross-section measuring less than 14 mm in diameter
7213.91.01
With less than 0.4% of carbon content in weight
7213.91.02
With equal or more than 0.4% of carbon content in weight
7213.99
Other
7213.99.01
Steel rod , with a maximum content of 0.13% of carbon, 0.1% of siliciuim; and, a minimum content of 0.02% of aluminum, in weight
7213.99.02
Circular cross-section, with a diameter equal to or greater than 19mm
7213.99.99
Other
7214
OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL, NOT FURTHER WORKED THAN FORGED, HOT-ROLLED, HOT-DRAWN OR HOT-EXTRUDED, BUT INCLUDING THOSE TWISTED AFTER ROLLING
Show details
7214.10.01
Forged
7214.20
containing indentations, ribs, grooves or Other deformations produced during the rolling process or twisted after rolling
7214.20.01
Concrete reinforcing bars and rods
7214.20.99
Other
7214.30.01
Other, Of free-cutting steel
7214.91
Of rectangular (Other than square) cross-section
7214.91.01
Containing less than a 0.25% in weight
7214.91.02
Containing 0.25% or more but less than a 0.6% , in weight
7214.91.99
Other
7214.99
Other
7214.99.01
Containing less than 0.25% of carbon in weight
7214.99.02
Containing more than 0.25% of carbon but less than 0.6% in weight
7214.99.99
Other
7215
Other bars and rods of iron or non-alloy steel
Show details
7215.10.01
Of free-cutting steel, not further worked than Cold-formed or coldfinished
7215.50
Other, not further worked than Cold-formed or Cold-finished
7215.50.01
Solids, coated with aluminum or copper
7215.50.99
Other
7215.90.01
Hot rolled, plated or coated with metal
7215.90.99
Other
7216
Angles, shapes and sections of iron or non-alloy steel
Show details
7216.10.01
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.01
L sections
7216.22.01
T sections
7216.31
u sections
7216.31.01
Of a thickness not exceeding 23 cm, other than those described in the subheading 7216.31.02
7216.31.02
Of a thickness of 13 cm or more, but not more than 20 cm
7216.31.99
Other
7216.32
I sections
7216.32.01
Of a thickness not exceeding 23 cm, other than those described in the subheading 7216.32.02
7216.32.02
Of a thickness of 13 cm or more, but no more than 20 cm
7216.32.04
Whose skate (width of the parallel sections) is greater than 270 mm and its weight is greater than 190 kg per linear meter
7216.32.99
Other
7216.33
H sections
7216.33.01
Profiles in H, except that included in section 7216.33.02
7216.33.02
Whose skate (width of the parallel sections) is greater than 300 mm
7216.40.01
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.50
Other angles, shapes and sections, not further worked than hot- Rolled, hot-drawn or extruded
7216.50.01
Z sections of a thickness not exceeding 23 cm
7216.50.99
Other
7216.61
obtained From Flat-Rolled Products
7216.61.01
H, I, L, T, U and Z sections, of a thickness not exceeding 23 cm, other than those described in the subheading 7216.61.02
7216.61.02
U and I, of a thickness of 13 cm or more, but no more than 20 cm
7216.61.99
Other
7216.69
Other
7216.69.01
H, I, L T, U and Z sections of a thickness not exceeding 23 cm, other than those of the subheading7216.69.02
7216.69.02
U and I, of a thickness of 13 cm or more, not exceeding 20 cm
7216.69.99
Other
7216.91.01
Cold-formed or Cold-finished From Flat-Rolled Products
7216.99.99
Other
7217
Wire of iron or non-alloy steel
Show details
7217.10
not plated or coated, whether or not polished
7217.10.01
Cold-forged, with a cross-section section of 7 mm or more, but not exceeding 28 mm, containing less than 0.6% of carbon in weight
7217.10.99
Other
7217.20
plated or coated with zinc
7217.20.01
Flatted, joint in a longitudinal direction, with glue, of the kind used for staples manufacturing only
7217.20.99
Other
7217.30
plated or coated with Other base metals
7217.30.01
Coated with copper, containing less than 0.6% of carbon
7217.30.99
Other
7217.90.99
Other
7218
STAINLESS STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF STAINLESS STEEL
Show details
7218.10.01
ingots and Other primary forms
7218.91.01
Of rectangular (Other than square) cross-section
7218.99.99
Other
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.11.01
Of a thickness exceeding 10 mm
7219.12
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.12.01
Of a thickness not exceeding 6 mm
7219.12.99
Other
7219.13.01
Of a thickness of 3 mm or more but less than 4.75 mm
7219.14.01
Of a thickness of less than 3 mm
7219.21.01
Of a thickness exceeding 10 mm
7219.22.01
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23.01
Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.01
Of a thickness of less than 3 mm
7219.31.02
Rolled up
7219.31.99
Others
7219.32
Of a thickness of 3 mm or more but less than 4.75 mm
7219.32.01
Of a thickness not exceeding 4 mm
7219.32.99
Other
7219.33.01
Of a thickness exceeding 1 mm but less than 3 mm
7219.34.01
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.35
Of a thickness of less than 0.5 mm
7219.35.01
Of a thickness of 0.3 mm or more
7219.35.99
Other
7219.90.99
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.11.01
Of a thickness of 4.75 mm or more
7220.12.01
Of a thickness of less than 4.75 mm
7220.20
Not further worked than cold-rolled (cold-reduced)
7220.20.01
Not templed or pretempled (DGN-410, DGN-420 and DGN-440) of a thickness of 0.3 mm or more, but no more than 6.0 mm, and with a maximum width of 325 mm
7220.20.02
Of a thickness of 0.3 mm or more, but no more than 4.0 mm, other than those described in the subheading 7220.20.01. Of a thickness of 0.3 mm or more, but no more than 4.0 mm, other than those described in the subheading 7220.20.01
7220.20.99
Other
7220.90.99
Other