HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10.00.00
Unalloyed pig irons containing by weight 0.5% or less of phosphorus
7201.20.00.00
Unalloyed pig iron containing by weight more than 0.5% of phosphorus
7201.50.00.00
Alloy pig irons; spiegel fonts
7202
Ferroalloys
Show details
7202.11.00.00
Containing more than 2% carbon
7202.19.00.00
Other
7202.21.00.00
Containing more than 55% of silicon
7202.29.00.00
Other
7202.30.00.00
Ferro-silico-manganese
7202.41.00.00
Containing by weight more than 4% of carbon
7202.49.00.00
Other
7202.50.00.00
Ferro-silico-chromium
7202.60.00.00
Ferronickel
7202.70.00.00
Ferromolybdenum
7202.80.00.00
Ferrotungsten and ferro-silico-tungsten
7202.91.00.00
Ferrotitanium and ferro-silico-titanium
7202.92.00.00
Ferrovanadium
7202.93.00.00
Ferroniobium
7202.99
Other
7202.99.10.00
Ferrophosphorus containing by weight 15% or more of phosphorus
7202.99.90.00
Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
Show details
7203.10.00.00
Ferrous products obtained by direct reduction of iron ore
7203.90.00.00
Other
7204
Waste and scrap of cast iron, iron or steel (scrap); remelting scrap ingots of iron or steel
Show details
7204.10.00.00
Smelting waste and scrap
7204.21.00.00
Stainless steels
7204.29.00.00
Other
7204.30.00.00
Waste and scrap of tinned iron or steel
7204.41.00.00
Turnings, fries, shavings, grindings, sawdust, filings and offcuts stamping or cutting, even in bundles
7204.49.00.00
Other
7204.50.00.00
Remelting scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.00.00
Shots
7205.21.00.00
In alloy steel
7205.29.00.00
Other
7206
Iron and non-alloy steel in ingots or other primary forms, excluding iron of heading 72.03
Show details
7206.10.00.00
Ingots
7206.90.00.00
Other
7207
Semi-finished products of iron or non-alloy steel
Show details
7207.11
Of square or rectangular cross section and whose width is less than twice the thickness
7207.11.00.11
Rolled
7207.11.00.19
Other
7207.11.00.90
Other
7207.12
Other, of rectangular cross section
7207.12.00.11
Rolled
7207.12.00.19
Other
7207.12.00.90
Other
7207.19.00.00
Other
7207.20
Containing by weight 0,25% or more of carbon
7207.20.00.10
Rolled
7207.20.00.90
Other
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10
In coils, simply hot-rolled, with patterns in relief
7208.10.10.00
Less than 1.50 m wide
7208.10.90.00
Other
7208.25
Of a thickness of 4.75 mm or more
7208.25.10.00
Less than 1.50 m wide
7208.25.90.00
Other
7208.26
Of a thickness of 3 mm or more but less than 4.75 mm
7208.26.10.00
Less than 1.50 m wide
7208.26.90.00
Other
7208.27
In a thickness of less than 3 mm
7208.27.10.00
Less than 1.50 m wide
7208.27.90.00
Other
7208.36
Of a thickness exceeding 10 mm
7208.36.10.00
Less than 1.50 m wide
7208.36.90.00
Other
7208.37
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.37.10.00
Of a thickness less than or equal to 6 mm, a width greater than or equal to 900 mm but not more than 1500 mm
7208.37.90
Other
7208.37.90.30
Less than 1.50 m wide
7208.37.90.80
Other
7208.38
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.10.00
A width greater than or equal to 900 mm but not more than 1500 mm
7208.38.90
Other
7208.38.90.30
Less than 1.50 m wide
7208.38.90.80
Other
7208.39
In a thickness of less than 3 mm
7208.39.10.00
A greater than or equal to 1.6 mm thickness, a width greater than or equal to 900 mm but not more than 1500 mm
7208.39.90
Other
7208.39.90.30
Less than 1.50 m wide
7208.39.90.80
Other
7208.40
Not in coils, hot-rolled, with patterns in relief
7208.40.10.00
Of a thickness less than or equal to 4.75 mm
7208.40.90.00
Other
7208.51.00.00
Of a thickness exceeding 10 mm
7208.52
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.52.10.00
More than 4.75 mm thick
7208.52.90.00
Other
7208.53.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.54
Less than 3mm thick
7208.54.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7208.54.00.20
Other, called "magnetic"
7208.54.00.99
Other
7208.90
Other
7208.90.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7208.90.20.00
Others, merely cut into a square or rectangular shape, even merely surface-treated, but not otherwise worked
7208.90.90.00
Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled, not clad, plated or coated
Show details
7209.15.00.00
Of a thickness of 3 mm or more
7209.16
Of a thickness exceeding 1 mm but less than 3 mm
7209.16.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.16.00.20
Other, called "magnetic"
7209.16.00.91
2 mm inclusive than 3 mm
7209.16.00.99
1 mm to 2 mm excluded
7209.17
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.17.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.17.00.20
Other, called "magnetic"
7209.17.00.90
Other
7209.18
In a thickness of less than 0.5 mm
7209.18.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.18.00.20
Other, called "magnetic"
7209.18.00.90
Other
7209.25.00.00
Of a thickness of 3 mm or more
7209.26
Of a thickness exceeding 1 mm but less than 3 mm
7209.26.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.26.00.20
Other, called "magnetic"
7209.26.00.91
2 mm inclusive than 3 mm
7209.26.00.99
1 mm to 2 mm excluded
7209.27
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.27.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.27.00.20
Other, called "magnetic"
7209.27.00.90
Other
7209.28
In a thickness of less than 0.5 mm
7209.28.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.28.00.20
Other, called "magnetic"
7209.28.00.90
Other
7209.90
Other
7209.90.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7209.90.20
Other, simply cut into squares or rectangles, even just surface-treated, but not further worked
7209.90.20.10
Not shiny, polished or glazed
7209.90.20.90
Other
7209.90.90.00
Other
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated
Show details
7210.11
Of a thickness of 0.5 mm or more
7210.11.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7210.11.20
Other, simply cut into squares or rectangles but not further worked
7210.11.20.10
Tinplate
7210.11.20.90
Other
7210.11.90.00
Other
7210.12
In a thickness of less than 0.5 mm
7210.12.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7210.12.20
Other, simply cut into squares or rectangles but not further worked
7210.12.20.10
Tinplate
7210.12.20.90
Other
7210.12.90.00
Other
7210.20
Sinkers, including terneplate
7210.20.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7210.20.21.00
Of less than 0.50 mm thick, wavy
7210.20.22.00
Of less than 0.50 mm thick, flat surface
7210.20.29.00
Other, not corrugated
7210.20.90.00
Other
7210.30
Zinc electroplated
7210.30.00.11
Steel of a thickness less than 3 mm and having a minimum yield strength of 275 MPa or a thickness of 3 mm or more and having a minimum yield strength of 355 MPa
7210.30.00.19
Other
7210.30.00.21
Containing less than 0.50 mm thick, wavy
7210.30.00.22
Of less than 0.50 mm thick, flat surface
7210.30.00.29
Other, not corrugated
7210.30.00.30
Other
7210.30.00.41
Containing less than 0.50 mm thick, wavy
7210.30.00.42
Of less than 0.50 mm thick, flat surface
7210.30.00.49
Other, not corrugated
7210.30.00.90
Other
7210.41.00.00
Wavy
7210.49.00.00
Other
7210.50.00.00
Covered with chromium oxides or chromium and chromium oxides
7210.61.00.00
Coated aluminum and zinc alloys
7210.69.00.00
Other
7210.70
Painted, varnished or coated with plastics
7210.70.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7210.70.21.00
Tinned on both sides, then printed on a front side to receive a coating or a coating of printed plastics, with a width between 800 mm and 1000 mm
7210.70.29.00
Other
7210.70.90
Other
7210.70.90.11
Whose thickness is less than or equal to 40mm
7210.70.90.19
Whose thickness is greater than 40mm
7210.70.90.21
Whose thickness is less than or equal to 40mm
7210.70.90.29
Whose thickness is greater than 40mm
7210.70.90.31
Whose thickness is less than or equal to 40mm
7210.70.90.39
Whose thickness is greater than 40mm
7210.70.90.80
In other subjects
7210.70.90.90
Other
7210.90
Other
7210.90.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7210.90.21.00
Silver, gold, platinum or enamelled
7210.90.22.00
Varnished or tinned and printed
7210.90.23.00
Chrome and printed
7210.90.29
Other
7210.90.29.11
Of a thickness of 3 mm and more
7210.90.29.19
Of a thickness of less than 3 mm
7210.90.29.91
Chrome
7210.90.29.99
Other
7210.90.90
Other
7210.90.90.10
Silver, gold or platinum
7210.90.90.20
Glazed
7210.90.90.90
Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.13
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of 4 mm or more, not in coils and not having patterns in relief
7211.13.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7211.13.00.21
Called "magnetic"
7211.13.00.29
Other
7211.13.00.30
Other, of a thickness of 5 mm to 100 mm inclusive excluded
7211.13.00.40
Called "magnetic"
7211.13.00.50
Other
7211.13.00.90
Other
7211.14
Other, with a thickness of 4.75 mm or more
7211.14.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7211.14.00.21
Laminate dishes called "magnetic"
7211.14.00.22
For re-rolling
7211.14.00.29
Other
7211.14.00.31
Called "magnetic"
7211.14.00.39
Other
7211.14.00.40
Other, of a thickness of 5 mm to 100 mm inclusive excluded
7211.14.00.50
Called "magnetic"
7211.14.00.61
Of a thickness greater than 4.75 mm
7211.14.00.69
Other
7211.14.00.90
Other
7211.19
Other
7211.19.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7211.19.00.20
Laminate dishes called "magnetic"
7211.19.00.31
Of a thickness of less than 3 mm
7211.19.00.39
Other
7211.19.00.41
Of a thickness of less than 3 mm
7211.19.00.49
Other
7211.19.00.51
Called "magnetic"
7211.19.00.59
Other
7211.19.00.60
Called "magnetic"
7211.19.00.71
2 mm included less than 3 mm
7211.19.00.72
1 mm to 2 mm excluded
7211.19.00.73
0.50 mm inclusive to 1 mm inclusive
7211.19.00.74
Less than 0.50 mm
7211.19.00.79
Other
7211.19.00.90
Other
7211.23
Containing by weight less than 0.25% carbon
7211.23.00.10
Called "magnetic"
7211.23.00.20
Intended for making tinplate (presented in rolls)
7211.23.00.30
Other
7211.23.00.40
Called "magnetic"
7211.23.00.51
3 mm or more
7211.23.00.58
Other
7211.23.00.90
Other
7211.29
Other
7211.29.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7211.29.00.20
Called "magnetic"
7211.29.00.30
Intended for making tinplate (presented in rolls)
7211.29.00.40
Other
7211.29.00.50
Called "magnetic"
7211.29.00.60
Other
7211.29.00.90
Other
7211.90
Other
7211.90.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus, less than 0.04% by weight for each element taken separately and 0.07% for these two components together
7211.90.20.00
Other, whether or not merely surface-treated, but not otherwise worked
7211.90.90.00
Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated or coated
Show details
7212.10
Tinned
7212.10.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus, less than 0.04% by weight for each element taken separately and 0.07% for these two components together
7212.10.21
Just tinned, even wavy, but not further worked
7212.10.21.10
Of a thickness of 0.50 mm or more
7212.10.21.90
Of a thickness of less than 0.50 mm
7212.10.29.00
Other
7212.10.91
Just tinned, even wavy, but not further worked
7212.10.91.10
Tinplate
7212.10.91.90
Other
7212.10.99.00
Other
7212.20
Zinc electroplated
7212.20.00.10
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7212.20.00.20
With a maximum width of 500 mm and whose thickness is less than or equal to at 6 mm does not exceed one tenth of the width
7212.20.00.91
Containing less than 0.50 mm thick, corrugated, but not further worked
7212.20.00.92
Containing less than 0.50 mm thick, flat surface, but not further worked
7212.20.00.97
Other
7212.30
Otherwise galvanized
7212.30.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7212.30.21.00
Not galvanized even wavy, but not otherwise worked
7212.30.29.00
Other
7212.30.91.00
Containing less than 0.50 mm thick, corrugated, but not further worked
7212.30.92.00
Containing less than 0.50 mm thick, flat surface, but not further worked
7212.30.93.00
Other, not galvanized, corrugated, but not further worked
7212.30.94.00
Other, not galvanized, but not further worked
7212.30.99.00
Other
7212.40
Painted, varnished or coated with plastics
7212.40.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7212.40.20.00
Other, called "magnetic"
7212.40.31.00
Not painted, varnished or coated with plastics, not corrugated, but not further worked
7212.40.39
Other
7212.40.39.10
Varnish and electro galvanized same on both sides, or coated with plastics, without printing, of which the width is 29,6mm between 180 mm and presented in coil
7212.40.39.90
Other
7212.40.91.00
Not painted, varnished or coated with plastics, not corrugated, but not further worked
7212.40.99
Other
7212.40.99.11
Whose thickness is less than or equal to 40mm
7212.40.99.19
Whose thickness is greater than 40mm
7212.40.99.21
Whose thickness is less than or equal to 40mm
7212.40.99.29
Whose thickness is greater than 40mm
7212.40.99.31
Whose thickness is less than or equal to 40mm
7212.40.99.39
Whose thickness is greater than 40mm
7212.40.99.80
In other subjects
7212.40.99.90
Other
7212.50
Otherwise plated or coated
7212.50.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7212.50.20.00
Other, called "magnetic"
7212.50.30.00
Merely coated, whether or not corrugated, but not otherwise worked
7212.50.40.00
Other
7212.50.51.00
Not sealed, flat surface, not further worked, of a thickness less than 0.50 mm
7212.50.52.00
Not sealed, wavy, but not otherwise worked, of a thickness of less than 0.50 mm
7212.50.59.00
Other, sealed, even wavy, but not otherwise worked
7212.50.63.00
Chrome and printed
7212.50.64.00
Chrome
7212.50.68.00
Other
7212.50.90.00
Other
7212.60
Panels
7212.60.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7212.60.20.00
Merely plated, whether or not corrugated, but not otherwise worked
7212.60.30.00
Other
7212.60.91
Clad, even wavy, but not further worked
7212.60.91.10
Of a thickness of 3 mm and more
7212.60.91.90
Of a thickness of less than 3 mm
7212.60.99.00
Other
7213
Bars and rods of iron or non-alloy steel
Show details
7213.10
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.10.10.00
Flattened circle cross-sectional shape or modified rectangle
7213.10.90.00
Other
7213.20.00.00
Other, cutting steel
7213.91
Of circular section with a diameter less than 14 mm
7213.91.10.00
Containing by weight 0.6% or more of carbon
7213.91.20.00
Of a diameter less than 5.5 mm, containing by weight 0.08% or less of carbon, provided that the sulfur and phosphorus content is less than 0.03% by weight for each of these elements alone and 0.05% for these two items together
7213.91.90.00
Other
7213.99.00.00
Other
7214
Bars and rods of iron or non-alloy steel, hot-rolled, hot-drawn or extruded, but including those twisted after rolling
Show details
7214.10.00.00
Forged
7214.20
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.20.20.00
Flattened circle cross-sectional shape or modified rectangle
7214.20.90.00
Other
7214.30.00.00
Other, cutting steel
7214.91.00.00
Of rectangular cross-section
7214.99
Other
7214.99.10.00
Cross-sectional shape of a flattened circle
7214.99.91.00
Rebar
7214.99.99.00
Other
7215
Other bars and rods of iron or non-alloy steel
Show details
7215.10.00.00
Of free-cutting steels, simply obtained or completed cold
7215.50
Other, formed or cold-finished
7215.50.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two components together
7215.50.20.00
Other
7215.50.90.00
Other
7215.90
Other
7215.90.11.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two components together
7215.90.19.00
Other
7215.90.90.00
Other
7216
Sections of iron or non-alloy steel
Show details
7216.10.00.00
U, I or H sections, not rolled or extruded, of a height of less than 80 mm
7216.21.00.00
L
7216.22.00.00
T sections
7216.31.00.00
U-profiles
7216.32.00.00
I-sections
7216.33.00.00
H sections
7216.40.00.00
L or T sections, not rolled or extruded, of a height of 80 mm or more
7216.50.00.00
Other sections, simply hot-rolled or extruded
7216.61
Formed or cold-finished profiles: - - Obtained from flat-rolled products
7216.61.00.00
Obtained from flat rolled products
7216.69.00.00
Other
7216.91
Obtained or cold-finished from flat-rolled products
7216.91.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7216.91.91.00
Cable ways
7216.91.98.00
Other
7216.99
Other
7216.99.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7216.99.91.00
Cable ways
7216.99.98.00
Other
7217
Son of iron or non-alloy steel
Show details
7217.10
Not coated, whether or not polished
7217.10.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7217.10.20.00
Other, of a diameter greater than 4 mm and less than 6.50 mm, a carbon content of less than 0.17% by less than 0.50% manganese, in less sulfur than or equal to 0 , 02%, phosphorus in lower or equal to 0.02%, silicon in lower or equal to 0.05%
7217.10.90
Other
7217.10.90.10
Gross yarn, black annealed
7217.10.90.20
Steel yarn, stretched white, having been specially treated to be directly used in strapping packages with a cross section, oval section, has a width of 1.3 mm and a resistance traction 130/140 kg per square millimeter
7217.10.90.90
Other
7217.20
Zinc
7217.20.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7217.20.91.00
Of a diameter less than or equal to 0.85 mm
7217.20.99.00
Other
7217.30
Coated with other base metals
7217.30.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7217.30.91.00
Copper for welding, imported coils
7217.30.99.00
Other
7217.90
Other
7217.90.10.00
Steel containing by weight 0.6% or more of carbon, provided that the sulfur and phosphorus content is less than 0.04% by weight for each element taken separately and 0.07% for these two elements together
7217.90.20.00
Other, otherwise plated
7217.90.90.00
Other
7218
Stainless steel in ingots or other primary forms; half stainless steel products
Show details
7218.10.00.00
Ingots and other primary forms
7218.91.00.00
Of rectangular cross-section
7218.99.00.00
Other
7219
Flat rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.11.00.00
Of a thickness exceeding 10 mm
7219.12.00.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.13.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.14.00.00
With a thickness less than 3 mm
7219.21.00.00
Of a thickness exceeding 10 mm
7219.22.00.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.00.00
With a thickness less than 3 mm
7219.31.00.00
Of a thickness of 4.75 mm or more
7219.32.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.33.00.00
Of a thickness exceeding 1 mm but less than 3 mm
7219.34.00.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.35.00.00
With a thickness less than 0.5 mm
7219.90.00.00
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.11.00.00
Of a thickness of 4.75 mm or more
7220.12.00.00
Of a thickness of less than 4.75 mm
7220.20
Simply cold-rolled
7220.20.00.10
With a maximum width of 500 mm, and a thickness of less than or equal to 6 mm, does not exceed one-tenth of the width
7220.20.00.80
Other
7220.90.00.00
Other