HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 39
3901.00.0000
Polymers of ethylene, in primary forms
Show details
3901.10.0000
Polyethylene having a specific gravity of less than 0,94
3901.10.1000
Linear polyethylene
3901.10.1020
High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with - a melt flow rate (MFR 190 degree C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and - a density (ASTM D 1505) of 0,922 g/cubic centime
3901.10.1050
Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with:;-a density (ASTM D 1505) of 0,924g/cm³ or morebut not more than 0,928g/cm³,;-a melt flow rate (190°C/2,16kg) of 48g/10min or morebut not more than 52g/10min, and;-a peak melting temperature of 1
3901.10.1060
Copolymer of ethylene and 1-butene (CASRN25087-34-7) with:;-a density (ASTM D 1505) of 0,922g/cm³ or more but not more than 0,926g/cm³and;-a melt flow rate (190°C/2,16kg) of 18g/10min or morebut not more than 22g/10min
3901.10.1090
Other
3901.10.9000
Other
3901.10.9030
Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper
3901.10.9090
Other
3901.20.0000
Polyethylene having a specific gravity of 0,94 or more
3901.20.1000
Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing: 50 mg/kg or less of aluminium, 2 mg/kg or less of calcium, 2 mg/kg or less of chromium, 2 mg/kg or less of iron, 2 mg/kg
3901.20.9000
Other
3901.30.0000
Ethylene-vinyl acetate copolymers
3901.30.0010
For cavity filling, for use in certain types of aircraft
3901.30.0099
Other
3901.40.0000
Ethylene-alpha-olefins copolymers, having a specific gravity of less than 0,94
3901.40.0010
High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with - a melt flow rate (MFR 190 degree celcius/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and - a density (ASTM D 1505) of 0,922 g/cm3 or
3901.40.0030
Octene linear low-density polyethylene (LLDPE) produced by a ZieglerNatta catalyst method in the form of pellets with: - more than 10 % but not more than 20 % by weight of copolymer, - a melt flow rate (MFR 190degree celcius/2,16 kg) of 0,7 g / 10 min or
3901.40.0050
Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with:;-a density (ASTM D 1505) of 0,924g/cm³ or morebut not more than 0,928g/cm³,;-a melt flow rate (190°C/2,16kg) of 48g/10min or morebut not more than 52g/10min, and;-a peak melting temperature of 1
3901.40.0060
Copolymer of ethylene and 1-butene (CASRN25087-34-7) with:;-a density (ASTM D 1505) of 0,922g/cm³ or more but not more than 0,926g/cm³and;-a melt flow rate (190°C/2,16kg) of 18g/10min or morebut not more than 22g/10min
3901.40.0090
Other
3901.90.0000
Other
3901.90.3000
Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the form
3901.90.8000
Other
3901.90.8010
For cavity filling, for use in certain types of aircraft
3901.90.8053
Other
3901.90.8055
Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6 % or more but not more than 50 % by weight, and - a melt flow rate of 1g/10 min or more at 190degree C/2.16 kg (measured using ASTM D1238)
3901.90.8067
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more
3901.90.8073
Mixture containing by weight - 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and - 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)
3901.90.8091
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
3901.90.8092
Chlorosulphonated polyethylene
3901.90.8093
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
3901.90.8094
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene
3901.90.8097
Chlorinated polyethylene, in the form of powder
3901.90.8099
Other
3902.00.0000
Polymers of propylene or of other olefins, in primary forms
Show details
3902.10.0000
Polypropylene
3902.10.0020
Polypropylene, containing no plasticiser, - of a melting point of more than 150 degree C (as determined by the ASTM D 3417 method), - of a heat of fusion of 15 J/g or more but not more than 70 J/g, - of an elongation at break of 1 000 % or more (as determ
3902.10.0040
Polypropylene, containing no plasticiser: - of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method); - of a flexural strength of 50-90 MPa (as determined by the ASTMD790 method); - of a Melt Flow Rate (MFR) at 230 degree C/ 2,16 kg of
3902.10.0090
Other
3902.20.0000
Polyisobutylene
3902.20.0010
Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800
3902.20.0020
Hydrogenated polyisobutene, in liquid form
3902.20.0090
Other
3902.30.0000
Propylene copolymers
3902.30.0010
For cavity filling, for use in certain types of aircraft
3902.30.0020
Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene
3902.30.0030
Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene
3902.30.0091
Other
3902.30.0095
A-B-A block copolymer, consisting of: - a copolymer of propylene and ethylene and - 21 % (A+ or -3 %) by weight of polystyrene
3902.30.0097
Liquid ethylene-propylene-copolymer with: - a flashpoint of 250 degree C or more, - a viscosity index of 150 or more, - of a number average molecular weight (Mn) of 650 or more
3902.30.0099
Other
3902.90.0000
Other
3902.90.1000
A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
3902.90.2000
Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10 % or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10 % or less of polyethylene and/or 25 % or less of polypropylene,
3902.90.9000
Other
3902.90.9010
For cavity filling, for use in certain types of aircraft
3902.90.9052
Other
3902.90.9055
Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene
3902.90.9060
Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: - liquid at room temperature - obtained by cationic polymerisation of C-5 alkenes monomers - with a number average molecular weight (Mn) of 370 (A+ or -50) - with a weig
3902.90.9065
Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39
3902.90.9070
Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without: -not more than 40 % by weight of tetradecene
3902.90.9075
Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form
3902.90.9092
Polymers of 4-methylpent-1-ene
3902.90.9094
Chlorinated polyolefins, whether or not in a solution or dispersion
3902.90.9099
Other
3903.00.0000
Polymers of styrene, in primary forms
Show details
3903.11.0000
Polystyrene
3903.19.0000
Other
3903.19.0040
Crystalline polystyrene with: - a melting point of 268 degree C or more but not more than 272 degree C - a setting point of 232 degree C or more but not more than 247 degree C, - whether or not containing additives and filling material
3903.19.0090
Other
3903.20.0000
Styrene-acrylonitrile (SAN) copolymers
3903.30.0000
Acrylonitrile-butadiene-styrene (ABS) copolymers
3903.90.0000
Other
3903.90.1000
Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more
3903.90.2000
Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6(b) to this chapter
3903.90.9000
Other
3903.90.9015
Copolymer in the form of granules containing by weight: - 78 A+ or -4 % styrene, - 9 A+ or -2 % n-butyl acrylate, - 11 A+ or -3 % n-butyl methacrylate,, - 1.5 A+ or -0,7 % methacrylic acidand - 0,01 % or more but not more than 2,5 % of polyolefinic wax
3903.90.9020
Copolymer in the form of granules containing by weight: - 83 A+ or -3 % styrene, - 7 A+ or -2 % n-butyl acrylate, - 9 A+ or -2 % n-butyl methacrylate and - 0,01 % or more but not more than 1 % of polyolefinic wax
3903.90.9033
Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more
3903.90.9035
Copolymer of _a_-methylstyrene and styrene, having a softening point exceeding 113 Adegrees C
3903.90.9038
Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile styrene copolymer (CAS RN 9003-54-7), each polymer being 50 (plus or minus 1) by weight
3903.90.9043
Mixture of polymers consisting by weight of:;-10% or more but not more than 30% of a styrene-ethylene-butylene-styrene block copolymer (CAS RN 66070-58-4),;-25% or more but not more than 45% of mineral oil (CAS RN 8042-47-5),;-25% or more but not more tha
3903.90.9045
Preparation, in form of powder, containing by weight: - 86 % or more but not more than 90 % of styrene-acrylic-copolymer and - 9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)
3903.90.9060
Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form
3903.90.9065
Copolymer of Styrene with 2, 5-Furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)
3903.90.9070
Copolymer in the form of granules containing by weight: - 75 % (+ or -7 %) styrene and - 25 % (+ or -7 %) methylmethacrylate
3903.90.9080
Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 u(mu)m and a maximum diameter of 800 u(mu)m and containing by weight: - minimum 65 % styrene, - maximum 25 % divinylbenzene for use in the manufacture of ion exchange resins
3903.90.9086
Mixture containing by weight: - 45 % or more but not more than 65 % of polymers of styrene - 35 % or more but not more than 45 % of poly(phenylene ether) - not more than 10 % of other additives and with one or more of the following special colour effects:
3903.90.9090
Other
3904.00.0000
Polymers of vinyl chloride or of other halogenated olefins, in primary forms
Show details
3904.10.0000
Poly(vinyl chloride), not mixed with any other substances
3904.10.0010
In the form of granules, for use in certain types of aircraft
3904.10.0090
Other
3904.21.0000
Other poly(vinyl chloride)
3904.21.0010
In the form of granules, for use in certain types of aircraft
3904.21.0090
Other
3904.22.0000
Plasticised
3904.22.0010
In the form of granules, for use in certain types of aircraft
3904.22.0090
Other
3904.30.0000
Vinyl chloride-vinyl acetate copolymers
3904.30.0030
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: - 87 % or more but not more than 92 % of vinyl chloride, - 2 % or more but not more than 9 % of vinyl acetate and - 1 % or more but not more than 8 % of vinyl alcohol,
3904.30.0090
Other
3904.40.0000
Other vinyl chloride copolymers
3904.40.0010
For cavity filling, for use in certain types of aircraft
3904.40.0091
Other
3904.40.0099
Other
3904.50.0000
Vinylidene chloride polymers
3904.50.1000
Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres
3904.50.9000
Other
3904.50.9010
For cavity filling, for use in certain types of aircraft
3904.50.9099
Other
3904.61.0000
Fluoropolymers
3904.61.0020
Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kgof extractable fluoride ions
3904.61.0090
Other
3904.69.0000
Other
3904.69.1000
Poly(vinyl fluoride), in one of the forms mentioned in note 6(b) to this chapter
3904.69.2000
Fluoroelastomers FKM
3904.69.8000
Other
3904.69.8010
For cavity filling, for use in certain types of aircraft
3904.69.8020
Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)
3904.69.8030
Copolymer of tetrafluoroethylene, hexafluoropropene and ethene
3904.69.8081
Other
3904.69.8085
Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers
3904.69.8088
Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile styrene copolymer (CAS RN 9003-54-7), each polymer being 50 (plus or minus 1) weight percent
3904.69.8094
Copolymer of ethylene and tetrafluoroethylene
3904.69.8096
Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39
3904.69.8097
Copolymer of chlorotrifluoroethylene and vinylidene difluoride
3904.69.8099
Other
3904.90.0000
Other
3904.90.0010
For cavity filling, for use in certain types of aircraft
3904.90.0090
Other
3905.00.0000
Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
Show details
3905.12.0000
Poly(vinyl acetate)
3905.19.0000
Other
3905.19.0010
For cavity filling, for use in certain types of aircraft
3905.19.0090
Other
3905.21.0000
Vinyl acetate copolymers
3905.29.0000
Other
3905.29.0010
For cavity filling, for use in certain types of aircraft
3905.29.0090
Other
3905.30.0000
Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
3905.30.0010
Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors
3905.30.0091
In the form of homopolymer resins with a viscosity (measured in 4% solution) of 3 mPas or more but not exceeding 61 mPas and a degree of hydrolysis of 80,0 mol% or more but not exceeding 99,9 mol%
3905.30.0092
Other
3905.30.0095
Other
3905.91.0000
Other
3905.91.0010
For cavity filling, for use in certain types of aircraft
3905.91.0025
Copolymer of vinylcaprolactam and vinylpyrrolidone (CAS RN 51987-20-3) in the form of a solution in 2-butoxyethanol (CAS RN 111-76-2) containing by weight 45% or more but not more than 58% of copolymer
3905.91.0035
Aqueous solution of a copolymer of vinylpyrrolidone and N,N-dimethylaminopropyl methacrylamide sulfate (CAS RN 175893-71-7), containing by weight 8% or more, but not more than 12% of copolymer
3905.91.0040
Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene
3905.91.0050
Aqueous solution consisting by weight of: -10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3), -not more than
3905.91.0060
Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight: -27 % or more but not more than 33 % of copolymer, -not more than 1,5 % of ethanol (CA
3905.91.0070
Aqueous solution, containing by weight: -25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2)
3905.91.0080
Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)
3905.91.0090
Other
3905.99.0000
Other
3905.99.1000
Poly(vinyl formal), in one of the forms mentioned in note 6(b) to this chapter, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight: - 9,5 % or more but notmore than 13 % of acetyl groups evaluated as vinyl acetate an
3905.99.9000
Other
3905.99.9010
For cavity filling, for use in certain types of aircraft
3905.99.9081
Other
3905.99.9095
Hexadecylated or eicosylated polyvinylpyrrolidone
3905.99.9096
Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight: - 9,5 % or more but not more than 13 % of acetyl groups eva
3905.99.9097
Povidone (INN)-iodine (CAS 25655-41-8)
3905.99.9098
Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups
3905.99.9099
Other
3906.00.0000
Acrylic polymers in primary forms
Show details
3906.10.0000
Poly(methyl methacrylate)
3906.90.0000
Other
3906.90.1000
Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
3906.90.2000
Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55 % or more of copolymer
3906.90.3000
Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate
3906.90.4000
Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)
3906.90.5000
Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
3906.90.6000
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not compounded with silica
3906.90.9000
Other
3906.90.9010
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004
3906.90.9017
Superabsorbent polymers, insoluble in water, which result from a polymerization of acrylic monomer molecules with crosslinkers to form crosslinked polymer networks, with a high capacity to absorb and retain water and aqueous liquids
3906.90.9023
Copolymer of methyl methacrylate, butyl acrylate, glycidyl methacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight not exceeding 500, in the form of flakes with a particle size of not more than 1 cm
3906.90.9033
Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 Amicro m or more but not more than 10 Amicro m
3906.90.9037
Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 Amicro m
3906.90.9041
Poly(alkyl acrylate) with an ester alkyl chain of C10toC30
3906.90.9043
Copolymer of methacrylic acid esters, butyl acrylate and cyclic dimethyl siloxanes (CAS RN 143106-82-5)
3906.90.9050
Polymers of esters of acrylic acid with one or more of the following monomers in the chain: - chloromethyl vinyl ether, - chloroethyl vinyl ether, - chloromethylstyrene, - vinyl chloroacetate, - methacrylic acid, - butenedioic acid monobutyl ester, contai
3906.90.9060
Aqueous dispersion containing by weight: - more than 10 % but not more than 15 % of ethanol, and - more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative
3906.90.9073
Preparation containing by weight: - 33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer, - 24 % or more but not more than 28 % of propylene glycol, and - 37 % or more but not more than 41 % of water
3906.90.9090
Other
3907.00.0000
Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms
Show details
3907.10.0000
Polyacetals
3907.10.0020
Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine
3907.10.0090
Other
3907.20.0000
Other polyethers
3907.21.0000
Bis(polyoxyethylene) methylphosphonate
3907.29.0000
Other
3907.29.1000
Polyether alcohols :
3907.29.1100
Polyethylene glycols :
3907.29.1110
Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more
3907.29.1120
Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000
3907.29.1190
Other
3907.29.2000
Other
3907.29.2025
Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight: - 48 % or more but not more than 52 % of propylene oxide and - 48 % or more but not more than 52 % of butylene oxide
3907.29.2030
Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone
3907.29.2035
Mixture containing by weight: - 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and - 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (
3907.29.2040
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3 600
3907.29.2045
4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated
3907.29.2050
Poly(p-phenylene oxide) in the form of powder - with a glasstransitiontemperature of 210 °C - with a weight average molecular weight (Mw) of 35 000 or ore but not more than 80 000 - with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram
3907.29.2055
4-Nonylphenol, branched and linear, ethoxylated
3907.29.2090
Other
3907.29.9000
Other
3907.29.9100
Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide
3907.29.9900
Other
3907.29.9915
Poly(oxypropylene) having alkoxysilyl end-groups
3907.29.9920
2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG an
3907.29.9930
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)
3907.29.9940
N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa
3907.29.9945
Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups
3907.29.9950
Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient
3907.29.9955
Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000
3907.29.9960
Polytetramethylene oxide di-p-aminobenzoate
3907.29.9970
Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives
3907.29.9990
Other
3907.30.0000
Epoxide resins
3907.30.0015
Epoxide resin, halogen-free, - containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin, - not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and -con
3907.30.0025
Epoxide resin - containing by weight 21% or more of brome, - not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and - containing solvents
3907.30.0040
Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548
3907.30.0070
Preparations of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing - at least 65% but not more than 75% silicon dioxide (CAS RN 60676-86-0), and - none or 0.5% by weight of carbon black (CAS RN 1333-86-4)
3907.30.0090
Other
3907.40.0000
Polycarbonates
3907.40.0025
Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of 98.5 % or more, in the form of pellets or granules, with a luminous transmittance of 88.5% or more, measured using a test sample with a thickness of 4 mm at a wav
3907.40.0035
Phenoxycarbonyl-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)
3907.40.0045
alpha-(2,4,6-Tribromofenyl)-omega-(2,4,6-tribromofenoxi)poly[oxi(2,6-dibromo-1,4-fenylen)isopropyliden(3,5-dibromo-1,4-fenylen)oxikarbonyl] (CAS RN 71342-77-3)
3907.40.0070
Polycarbonate of phosgene and bisphenol A: - containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol, - with p-cumylphenol endcaps, and - with a weight average molecular weigh
3907.40.0080
Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps
3907.40.0090
Other
3907.50.0000
Alkyd resins
3907.61.0000
Poly(ethylene terephthalate)
3907.69.0000
Other
3907.69.0010
Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol
3907.69.0090
Other
3907.70.0000
Poly(lactic acid)
3907.91.0000
Other polyesters
3907.91.1000
Liquid
3907.91.9000
Other
3907.91.9010
Diallyl phthalate prepolymer, in powder form
3907.91.9090
Other
3907.99.0000
Other
3907.99.0500
Thermoplastic liquid crystal aromatic polyester copolymers
3907.99.1000
Poly(ethylene naphthalene-2,6-dicarboxylate)
3907.99.8000
Other
3907.99.8010
Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder
3907.99.8025
Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol
3907.99.8030
Poly(hydroxyalkanoate), predominantly consisting of poly(3- hydroxybutyrate)
3907.99.8035
Copolymer in form of a clear, pale yellow liquid, consisting of - phthalic acid isomers and/or aliphatic dicarboxylic acids, - aliphatic diols, and - fatty acid end-caps with: - a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH, - a vis
3907.99.8070
Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol
3907.99.8080
Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
3907.99.8090
Other
3908.00.0000
Polyamides in primary forms
Show details
3908.10.0000
Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12
3908.90.0000
Other
3908.90.0010
Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39
3908.90.0030
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine
3908.90.0090
Other
3909.00.0000
Amino-resins, phenolic resins and polyurethanes, in primary forms
Show details
3909.10.0000
Urea resins; thiourea resins
3909.20.0000
Melamine resins
3909.20.0010
Polymer blend containing - 60% or more but not more than 75% melamine resin (CAS RN 9003-08-1), - 15% or more but not more than 25% by weight of silica (CAS RN 14808-60-7 or 60676-86-0), - at least 5% but not more than 15% cellulose (CAS RN 9004-34-6),
3909.20.0090
Other
3909.31.0000
Other amino-resins
3909.39.0000
Other
3909.39.0010
Formaldehyde, oligomeric reaction products with aniline (CAS RN 25214-70-4)
3909.39.0090
Other
3909.40.0000
Phenolic resins
3909.40.0020
Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices
3909.40.0070
Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80°C or more but not exceeding 95°C according to standard ASTM E28-92 (CAS RN 112484-41-0)
3909.40.0090
Other
3909.50.0000
Polyurethanes
3909.50.1000
Polyurethane of 2,2'-(tert-butylimino)diethanol and 4,4'-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 50 % or more of polymer
3909.50.9000
Other
3909.50.9010
UV curable water soluble liquid photopolymer consisting of a mixture by weight of - 60 % or more of two-functional acrylated polyurethane oligomers and - 30 % (A+ or -8 %) of mono-functional and tri-functional (metha) acrylates, and - 10 % (A+ or -3 %) of
3909.50.9020
Preparation containing by weight: - 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups, - 3 % or more but not more than 5 % of enzymatically modified starch, and - 77 % or more but not more than 83 % of water
3909.50.9030
Preparation containing by weight: - 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups, - 19 % or more but not more than 23 % of diethyleneglycol butyl ether, and - 60 % or more but not more than 64 % of water
3909.50.9040
Preparation containing by weight: - 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups, - 37 % or more but not more than 39 % of propyleneglycol, and - 26 % or more but not more than 28 % of water
3909.50.9090
Other
3910.00.0000
Silicones in primary forms
Show details
3910.00.0010
Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9% or more
3910.00.0015
Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated
3910.00.0020
Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]
3910.00.0025
Preparations containing by weight: - 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and - 10 % or more, -Butyldimethylsilyl- -3-[(2-methyl-1-oxo-2-propen-1 yl
3910.00.0035
Preparations containing by weight: - 30 % or more, -Butyldimethylsilyl- -(3-methacryloxy-2- hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148- 59-6) and - 10 % or more, N,N - Dimethylacrylamide (CAS RN 2680-03-7)
3910.00.0040
Silicones of a kind used in the manufacture of long term surgical implants
3910.00.0045
Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPas (CAS RN 70131-67-8)
3910.00.0050
Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum
3910.00.0055
Preparation containing by weight: - 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2), - 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and - 1 % or mor
3910.00.0060
Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups
3910.00.0065
Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)
3910.00.0070
Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices
3910.00.0075
Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder
3910.00.0080
Monomethacryloxypropylterminated poly(dimethylsiloxane)
3910.00.0090
Other
3911.00.0000
Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms
Show details
3911.10.0000
Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
3911.10.0010
For cavity filling, for use in certain types of aircraft
3911.10.0081
Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: - an iodine value of more
3911.10.0090
Other
3911.20.0000
Poly(1,3-phenylene methylphosphonate)
3911.90.0000
Other
3911.90.1100
Condensation or rearrangement polymerisation products whether or not chemically modified
3911.90.1110
Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20% of additives
3911.90.1190
Other
3911.90.1300
Poly(thio-1,4-phenylene)
3911.90.1900
Other
3911.90.1915
Polyetherimide of 4,4-[(isopropylidene)bis(p-phenylenoxy)]diphthalic dianhydride and 1,3-benzenediamine or 1,4-benzenediamine (CAS RN 61128-46-9 or CAS RN 61128-47-0)
3911.90.1920
Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing: - 83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), - a synthetic rubb
3911.90.1930
Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide
3911.90.1935
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4’-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20% of additives
3911.90.1940
m- Xylene formaldehyde resin
3911.90.1970
Preparation, containing: - Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), - 1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0), - in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % b
3911.90.1980
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) (CASRN25608-63-3and CASRN25667-42-9) containing by weight not more than 20% of additives
3911.90.1990
Other
3911.90.9200
Other
3911.90.9900
Other
3911.90.9910
For cavity filling, for use in certain types of aircraft
3911.90.9920
Other
3911.90.9923
Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with: -N,N-dimethylpropane-1,3-diamine, -a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-g
3911.90.9925
Copolymer of vinyltoluene and a-methylstyrene
3911.90.9928
Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form
3911.90.9935
Alternated copolymer of ethylene and maleic anhydride (EMA)
3911.90.9938
Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7atetrahydro4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of a hydrogenated styrene but
3911.90.9940
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight
3911.90.9943
Copolymer of a-methylstyrene and styrene, having a softening point of more than 113 Adegrees C
3911.90.9945
Copolymer of maleic acid and methyl vinyl ether
3911.90.9948
Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7atetrahydro4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of an ethylene-propylene copo
3911.90.9960
Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form
3911.90.9963
Mixture, containing by weight: -30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0), -10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 250
3911.90.9965
Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether
3911.90.9970
Aqueous solution containing by weight: - 30 % or more but not more than 40 % of poly-4-vinylpyridine-N-oxide, - 0,1 % or more but not more than 4 % of isonicotinic acid-N-oxide, - 0,1 % or more but not more than 3,5 % of sodium sulphate, - 0,1 % or more b
3911.90.9986
Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)
3911.90.9990
Other
3912.00.0000
Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
Show details
3912.11.0000
Cellulose acetates
3912.11.0020
Cellulose acetate flakes
3912.11.0030
Cellulose triacetate (CAS RN 9012-09-3)
3912.11.0040
Cellulose diacetate powder
3912.11.0090
Other
3912.12.0000
Plasticised
3912.20.0000
Cellulose nitrates (including collodions)
3912.20.1100
Non-plasticised
3912.20.1900
Other
3912.20.9000
Plasticised
3912.31.0000
Cellulose ethers
3912.39.0000
Other
3912.39.2000
Hydroxypropylcellulose
3912.39.8500
Other
3912.39.8510
Ethylcellulose, not plasticized
3912.39.8520
Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (A+ or -3) % of ethylcellulose
3912.39.8530
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms
3912.39.8550
Polyquaternium 10 (CAS RN 68610-92-4)
3912.39.8560
Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals
3912.39.8590
Other
3912.90.0000
Other
3912.90.1000
Cellulose esters
3912.90.1020
Hydroxypropyl methylcellulose phthalate
3912.90.1090
Other
3912.90.9000
Other
3913.00.0000
Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms
Show details
3913.10.0000
Alginic acid, its salts and esters
3913.10.0020
Sodium alginate extracted from brown seaweed, with- a loss on drying of not more than 15 % by weight (4h at 105 °C),- a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight
3913.10.0090
Other
3913.90.0000
Other
3913.90.0020
Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
3913.90.0030
Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000
3913.90.0040
Xanthan gum
3913.90.0085
Sodium hyaluronate
3913.90.0087
Non sterile
3913.90.0088
Other
3913.90.0095
Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)
3913.90.0099
Other
3914.00.0000
Ion-exchangers based on polymers of headings 3901 to 3913, in primary forms
Show details
3914.00.0010
Aqueous suspension, containing by weight;-20% or more but not more than 30% of beaded agarose, modified with nitrilotriacetic acid and loaded with divalent nickel ions (CAS RN 1615227-97-8), and;-20% or more but not more than 30% of ethanol (CAS RN 64-17-
3914.00.0090
Other
3915.00.0000
Waste, parings and scrap, of plastics
Show details
3915.10.0000
Of polymers of ethylene
3915.20.0000
Of polymers of styrene
3915.30.0000
Of polymers of vinyl chloride
3915.90.0000
Of other plastics
3915.90.1100
Of polymers of propylene
3915.90.8000
Other
3916.00.0000
Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
Show details
3916.10.0000
Of polymers of ethylene
3916.10.0010
For use in certain types of aircraft
3916.10.0090
Other
3916.20.0000
Of polymers of vinyl chloride
3916.20.0010
For use in certain types of aircraft
3916.20.0091
Other
3916.20.0099
Other
3916.90.0000
Of other plastics
3916.90.1000
Of condensation or rearrangement polymerisation products, whether or not chemically modified
3916.90.1010
Rods with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or morebut not more than 25 % of inorganic fillers
3916.90.1090
Other
3916.90.5000
Of addition polymerisation products
3916.90.5010
For use in certain types of aircraft
3916.90.5090
Other
3916.90.9000
Other
3917.00.0000
Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
Show details
3917.10.0000
Artificial guts (sausage casings) of hardened protein or of cellulosic materials
3917.10.1000
Of hardened protein
3917.10.9000
Of cellulosic materials
3917.21.0000
Tubes, pipes and hoses, rigid
3917.21.1000
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.21.1010
For use in certain types of aircraft
3917.21.1090
Other
3917.21.9000
Other
3917.21.9010
With fittings attached, for use in civil aircraft (TN100)
3917.21.9020
For use in certain types of aircraft
3917.21.9090
Other
3917.22.0000
Of polymers of propylene
3917.22.1000
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.22.1010
For use in certain types of aircraft
3917.22.1090
Other
3917.22.9000
Other
3917.22.9010
With fittings attached, for use in civil aircraft (TN100)
3917.22.9020
For use in certain types of aircraft
3917.22.9090
Other
3917.23.0000
Of polymers of vinyl chloride
3917.23.1000
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917.23.1010
For use in certain types of aircraft
3917.23.1090
Other
3917.23.9000
Other
3917.23.9010
With fittings attached, for use in civil aircraft (TN100)
3917.23.9020
For use in certain types of aircraft
3917.23.9090
Other
3917.29.0000
Of other plastics
3917.29.0011
Of addition polymerisation products
3917.29.0019
Other
3917.29.0091
Other
3917.29.0099
Other
3917.31.0000
Other tubes, pipes and hoses
3917.31.0010
With fittings attached, for use in civil aircraft (TN100)
3917.31.0020
For use in certain types of aircraft
3917.31.0030
Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in
3917.31.0090
Other
3917.32.0000
Other, not reinforced or otherwise combined with other materials, without fittings
3917.32.0010
For use in certain types of aircraft
3917.32.0020
Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in
3917.32.0030
Heat shrinkable tube:;-containing by weight 80% or more polymer,;-with an insulation resistance of 90MW or more,;-with a dielectric strength of 35kV / mm or more,;-with a wall thickness of 0,04mm or more, but not more than 0,9mm,;-with a lay-flat width of
3917.32.0090
Other
3917.33.0000
Other, not reinforced or otherwise combined with other materials, with fittings
3917.33.0010
With fittings attached, for use in civil aircraft (TN100)
3917.33.0090
Other
3917.39.0000
Other
3917.39.0010
With fittings attached, for use in civil aircraft (TN100)
3917.39.0020
Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions used in
3917.39.0091
Other
3917.39.0099
Other
3917.40.0000
Fittings
3917.40.0010
For use in civil aircraft (TN100)
3917.40.0020
Plastic fittings (kit of nuts and ferrules or nuts) and connectors: -threaded, -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter
3917.40.0091
Other
3917.40.0099
Other
3918.00.0000
Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter
Show details
3918.10.0000
Of polymers of vinyl chloride
3918.10.1000
Consisting of a support impregnated, coated or covered with poly(vinyl chloride)
3918.10.1010
For use in certain types of aircraft
3918.10.1090
Other
3918.10.9000
Other
3918.10.9010
For use in certain types of aircraft
3918.10.9090
Other
3918.90.0000
Of other plastics
3918.90.0010
For use in certain types of aircraft
3918.90.0090
Other
3919.00.0000
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls
Show details
3919.10.0000
In rolls of a width not exceeding 20 cm
3919.10.1200
Strips, the coating of which consists of unvulcanised natural or synthetic rubber
3919.10.1500
Of polypropylene
3919.10.1900
Other
3919.10.1910
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other sid
3919.10.1990
Other
3919.10.8000
Other
3919.10.8010
For use in certain types of aircraft
3919.10.8025
Other
3919.10.8027
Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 degree C or more but not more than 200 degree C, and a polyester liner, and - onthe other side not coated or coated with an acrylic pressure s
3919.10.8035
Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visib
3919.10.8037
Polytetrafluoroethylene film: - with a thickness of 100 Amicro m or more, - an elongation at break of not more than 100 %, - coated on one side with a pressure sensitive silicon adhesive
3919.10.8045
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm
3919.10.8048
Plastic strips of polypropylene, -self-adhesive, -unilaterally adhesive-coated with an Acrylic Polymer, -in rolls with a width of 20 cm or less, -with a thickness including adhesion layer of 0,03 mm or less,for use in the manufacturing of lithium-ion elec
3919.10.8050
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 Amicro m or more and an adhesive part of acrylic type of a thickness of 5 Amicro m or more, for usein the grinding and/or dicing process of silicon
3919.10.8055
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 Adegrees of more
3919.10.8057
Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesi
3919.10.8063
Reflecting film consisting of - a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, - a layer of an acrylic resin having embedded glass beads, - a la
3919.10.8073
Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer,
3919.10.8075
Self adhesive reflecting film, consisting of several layers including: ;- a copolymer of acrylic resin, ;- polyurethane, ;- a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or
3919.10.8085
Poly(vinyl chloride) or polyethylene or any other polyolefine film: - of a thickness of 65 Amicro m or more, - coated on one side with an acrylic UV-sensitive adhesive and a polyester liner
3919.10.8090
Other
3919.90.0000
Other
3919.90.2000
Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
3919.90.8000
Other
3919.90.8010
For use in certain types of aircraft
3919.90.8019
Other
3919.90.8020
Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90degree C or more but not more than 200degree C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure se
3919.90.8022
Polyester, polyethylene or polypropylene film coated on one or both sides with a pressure-sensitive and self-adhesive acrylic and / or rubber sheet, whether or not fitted with a retractable protective film, in rolls of a width of 45,7 cm but not more than
3919.90.8023
Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure
3919.90.8024
Reflecting laminated sheet: - consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, - covered on both sides with one or more layers of plastic material and - covered on one side with an adhesive layer and a release sheet
3919.90.8028
Poly(vinyl chloride) or polyethylene or any other polyolefine film: - of a thickness of 65 micrometre or more, - coated on one side with an acrylic UV-sensitive adhesive and a polyester liner
3919.90.8030
Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesi
3919.90.8031
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other sid
3919.90.8033
Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 m or more, but not more than 70 m, and with a width of more than 1 245 mm but not more th
3919.90.8035
Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: - a layer of polyurethane containing glass micro beads, - a layer of poly(ethylene vi
3919.90.8037
Polytetrafluoroethylene film: - with a thickness of 100 um or more, - an elongation at break of not more than 100 %, - coated on one side with a pressure sensitive silicon adhesive
3919.90.8041
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 micrometre or more and an adhesive part of acrylic type of a thickness of 5 micrometre or more, for use in the grinding and/or dicing process of sil
3919.90.8045
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm
3919.90.8049
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet
3919.90.8050
Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer,
3919.90.8051
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50m or more but not exceeding 90m, covered on one side with an adhesive layer and a release sheet
3919.90.8053
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 degree of more th
3919.90.8054
Poly(vinyl chloride) film, whether or not covered on one side with a layer of polymer, with - an acrylic adhesive with an adhesive strength of 70 N/m or more whether or not reduced upon irradiation, - a total thickness without release liner of 78 microns
3919.90.8065
Self-adhesive film with a thickness of 40 micrometre or more, but not more than 400 micrometre, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on t
3919.90.8070
Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad
3919.90.8080
Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an
3919.90.8082
Reflecting film consisting of: - a polyurethane layer, - a glass microspheres layer, - a metallised aluminium layer, and - an adhesive, covered on one or both sides with a release liner, - whether or not a poly(vinyl chloride) layer, - a layer whether or
3919.90.8083
Reflector or diffuser sheets, in rolls, - for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or - for equal transmission and distribution of light, intended for LCD modules
3919.90.8099
Other
3920.00.0000
Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Show details
3920.10.0000
Of polymers of ethylene
3920.10.2300
Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
3920.10.2400
Stretch film, not printed
3920.10.2410
For use in certain types of aircraft
3920.10.2490
Other
3920.10.2500
Other
3920.10.2505
For use in certain types of aircraft
3920.10.2520
Other
3920.10.2530
Mono-layered High-Density Polyethylene film: -containing by weight 99 % or more of polyethylene, -with a thickness of 12 μm or more but not more than 20 μm, -with a length of 4000 m or more but not more than 7000 m, -with a width of 600 mm or more but not
3920.10.2590
Other
3920.10.2800
0,94 or more
3920.10.2810
For use in certain types of aircraft
3920.10.2820
A Separator film of polyethylene:;-coated on one side with a layer of aluminium oxide,;-containing by weight not more than 70% of polyethylene,;-containing by weight not more than 30% of aluminum oxide,;-with a total thickness of 5µm or more but not more
3920.10.2891
Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has th
3920.10.2899
Other
3920.10.4000
Other
3920.10.4010
For use in certain types of aircraft
3920.10.4040
Other
3920.10.4099
Other
3920.10.8100
Of a thickness exceeding 0,125 mm
3920.10.8900
Other
3920.10.8910
For use in certain types of aircraft
3920.10.8925
Other
3920.10.8940
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8 mm or more but not exceeding 1.2 mm
3920.10.8945
Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels
3920.10.8955
Ethylene vinyl acetate (EVA) film: - with a raised relief surface with embossed undulations, - not laminated, - not cross-linked, and - with a thickness of more than 0,3 mm
3920.10.8990
Other
3920.20.0000
Of polymers of propylene
3920.20.2100
Of a thickness not exceeding 0,10 mm
3920.20.2110
For use in certain types of aircraft
3920.20.2140
Sheets of biaxially - oriented polypropylene film: - with the thickness of not more than 0,1 mm, - printed on both sides with specialised coatings to allow banknote security printing
3920.20.2150
Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron
3920.20.2190
Other
3920.20.2900
Other
3920.20.2910
For use in certain types of aircraft
3920.20.2960
Other
3920.20.2970
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: - a thickness of 55 micrometre o
3920.20.2994
Co-extruded trilayer film, each layer containing a mixture of polypropylene and polyethylene, containing not more than 3% by weight of other polymers, whether or not containingtitanium dioxide in the core layer, of an overall thickness of not more tha
3920.20.2999
Other
3920.20.8000
Of a thickness exceeding 0,10 mm
3920.20.8010
For use in certain types of aircraft
3920.20.8090
Other
3920.30.0000
Of polymers of styrene
3920.30.0010
Acrylonitrile-butadiene-styrene, for use in certain types of aircraft
3920.30.0090
Other
3920.43.0000
Of polymers of vinyl chloride
3920.43.1000
Of a thickness not exceeding 1 mm
3920.43.1010
For use in certain types of aircraft
3920.43.1092
Other
3920.43.1094
Film of a specular gloss of 70 or more, measured at an angle of 60degreeusing a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of
3920.43.1095
Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet
3920.43.1099
Other
3920.43.9000
Of a thickness exceeding 1 mm
3920.43.9010
For use in certain types of aircraft
3920.43.9090
Other
3920.49.0000
Other
3920.49.1000
Of a thickness not exceeding 1 mm
3920.49.1010
For use in certain types of aircraft
3920.49.1030
Other
3920.49.1093
Film of a specular gloss of 70 or more, measured at an angle of 60degreeusing a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of
3920.49.1099
Other
3920.49.9000
Of a thickness exceeding 1 mm
3920.49.9010
For use in certain types of aircraft
3920.49.9090
Other
3920.51.0000
Of acrylic polymers
3920.51.0020
Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm
3920.51.0030
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50u(mu)m or more but not exceeding 90u(mu)m
3920.51.0040
Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)
3920.51.0050
Sheets of polymethylmethacrylate conforming to standard -EN 4364 (MIL-P-5425E) and DTD5592A, or EN 4365 (MIL-P-8184) and DTD5592A
3920.51.0090
Other
3920.59.0000
Other
3920.59.1000
Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres
3920.59.9000
Other
3920.61.0000
Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
3920.61.0030
Reflecting sheet:;-of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern;-covered on one or both sides with one or more layers of plastic or metallisation, and;-whether or not covered on one side with a self-adhesive
3920.61.0040
Extruded thermoplastic foils or films of polycarbonate with: -matt surface texture on both sides, -a thickness of more than 50 μm but not more than 200 μm, -a width of 800 mm or more, but not more than 1 500 mm and -a length of 915 m or more, but not more
3920.61.0050
Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a:;-total thickness of more than 230μmbut not more than 270μm,;-top layer thickness of more than 40μmbut not more than 55μm,;-defined surface roughness of the top layer
3920.61.0090
Other
3920.62.0000
Of poly(ethylene terephthalate)
3920.62.1200
Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 15
3920.62.1900
Other
3920.62.1905
Polyethylene terephthalate film, in rolls , of a thickness of 0,335 mm but not exceeding 0,365 mm, and - coated with a gold layer of a thickness of 0,03 um or more but not more than 0,06 um
3920.62.1908
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 Amicro m, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
3920.62.1912
Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 Amicro m, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material
3920.62.1918
Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 Amicro m, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, u
3920.62.1920
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers
3920.62.1928
Non-transparent poly(ethylene terephthalate) film:;-covered on one side with a layer of a fluoropolymer,;-covered on the other side with an adhesive and a layer of polyvinylidene difluoride,;-each outer layer with a thickness of 7nm or more but not more t
3920.62.1938
Poly(ethylene terephthalate) film, of a thickness of not more than 12 Amicro m, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm
3920.62.1948
Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 u(mu)m (A+ or -3 u(mu)m)
3920.62.1952
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 Amicro m and having a surface
3920.62.1960
Poly (ethylene terephtalate) film: - of a thickness of not more than 20 Amicro m, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica oraluminium oxide has been dispersed and of a thickness of not more t
3920.62.1968
Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
3920.62.1976
Transparent poly(ethylene terephthalate) film: - coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm, - with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/
3920.62.1999
Other
3920.62.9000
Of a thickness exceeding 0,35 mm
3920.62.9010
Polyethylene terephthalate film, in rolls , of a thickness of 0,335 mm but not more than 0,365 mm, and - coated with a gold layer of a thickness of 0,03 or more but not more than 0,06 um
3920.62.9020
Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
3920.62.9090
Other
3920.63.0000
Of unsaturated polyesters
3920.69.0000
Of other polyesters
3920.69.0020
Film of poly(ethylene naphthalene-2,6-dicarboxylate)
3920.69.0030
Monoor multilayer, transverse oriented, shrink film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, -
3920.69.0050
Monolayer, biaxially oriented film: - composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, - having a thickness of 20 Amicro m or more but no
3920.69.0060
Monolayer, transverse oriented, shrink film: - composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid), - having a thickness of 45 Amicro m or more but not more than 50 Amicr
3920.69.0070
Monoor multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -with a t
3920.69.0090
Other
3920.71.0000
Of cellulose or its chemical derivatives
3920.73.0000
Of cellulose acetate
3920.73.1000
Film in rolls or in strips, for cinematography or photography
3920.73.8000
Other
3920.79.0000
Of other cellulose derivatives
3920.79.1000
Of vulcanised fibre
3920.79.1010
Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm
3920.79.1090
Other
3920.79.9000
Other
3920.91.0000
Of other plastics
3920.91.0010
For use in certain types of aircraft
3920.91.0052
Poly(vinyl butyral) film: - containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, - with a thickness of 0,73 mm or more but not more than 1,50 mm
3920.91.0091
Poly(vinyl butyral) film having a graduated coloured band
3920.91.0093
Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having thefollowing characteristics: - a visible light transmission o
3920.91.0095
Co-extruded trilayer poly(vinyl butyral) film
3920.91.0097
Other
3920.91.0099
Other
3920.92.0000
Of polyamides
3920.93.0000
Of amino-resins
3920.94.0000
Of phenolic resins
3920.99.0000
Of other plastics
3920.99.2100
Of condensation or rearrangement polymerisation products, whether or not chemically modified
3920.99.2800
Other
3920.99.2840
Polymer film containing the following monomers: - poly (tetramethylene ether glycol), - bis (4-isocyanotocyclohexyl) methane, - 1,4-butanediol or 1,3-butanediol, - with athickness of 0,25 mm or more but not more than 5,0 mm, - embossed with a regular patt
3920.99.2845
Transparent polyurethane film metallised on one side: - with a gloss of more than 90 degrees according to ASTM D2457 - covered on the metalized side with a heat bonding adhesive layerconsisting of polyethylene/polypropylene copolymer - covered on the othe
3920.99.2848
Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of
3920.99.2850
Thermoplastic polyurethane film, of a thickness of 250 u(mu)m or more but not more than 350 u(mu)m, covered on one side with a removable protective film
3920.99.2865
Matt, thermoplastic polyurethane foil in rolls with: - a width of 1640 mm (A+ or -10 mm), - a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), - a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as
3920.99.2870
Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: - microspheres with a coating of metal, whether or not alloyed with gold, - an adhesive layer, - with a protective layer of silicone or poly(ethylene terephthalate) on one
3920.99.2890
Other
3920.99.5200
Of addition polymerisation products
3920.99.5300
Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
3920.99.5900
Other
3920.99.5910
For use in certain types of aircraft
3920.99.5925
Other
3920.99.5930
Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite
3920.99.5955
Ion-exchange membranes of fluorinated plastic material
3920.99.5965
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 micrometre or more but not more than 90 micrometre, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not m
3920.99.5975
Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: - a thickness of 0,010 mm or more but not more than 0,80 mm, - a width of 1 219 mm or more but not more than 1 575 mm, and - a melting point of 252 degree celcius (measured according A
3920.99.5990
Other
3920.99.9000
Other
3920.99.9020
Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays
3920.99.9090
Other