Slovenia Vehicles and their parts, accessories, other than railway and tramway vehicles HS Code Classification Lookup | Comprehensive HS Code Search Tool by Ecer Freight

HS Code Finder

Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.

8701.00.0000 Tractors (other than tractors of heading 8709)

Show details

8701.10.0000 Pedestrian- controlled tractors

8701.20.0000 Road tractors for semi-trailers

8701.21.0000 With only compression-ignition internal combustion piston engine (diesel or semi-diesel) :

8701.21.1000 New

8701.21.9000 Used

8701.22.0000 With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion :

8701.22.1000 New

8701.22.9000 Used

8701.23.0000 With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion :

8701.23.1000 New

8701.23.9000 Used

8701.24.0000 With only electric motor for propulsion :

8701.24.1000 New

8701.24.9000 Used

8701.29.0000 Other

8701.30.0000 Track-laying tractors

8701.91.0000 Other, of an engine power

8701.91.1000 Agricultural tractors and forestry tractors, wheeled

8701.91.9000 Other

8701.92.0000 Exceeding 18 kW but not exceeding 37 kW

8701.92.1000 Agricultural tractors and forestry tractors, wheeled

8701.92.9000 Other

8701.93.0000 Exceeding 37 kW but not exceeding 75 kW

8701.93.1000 Agricultural tractors and forestry tractors, wheeled

8701.93.9000 Other

8701.94.0000 Exceeding 75 kW but not exceeding 130 kW

8701.94.1000 Agricultural tractors and forestry tractors, wheeled

8701.94.9000 Other

8701.95.0000 Exceeding 130 kW

8701.95.1000 Agricultural tractors and forestry tractors, wheeled

8701.95.9000 Other

8702.00.0000 Motor vehicles for the transport of ten or more persons, including the driver

Show details

8702.10.0000 With only compression-ignition internal combustion piston engine (diesel or semi-diesel)

8702.10.1100 Of a cylinder capacity exceeding 2 500 cubic centimeters

8702.10.1900 Used

8702.10.9100 Of a cylinder capacity not exceeding 2 500 cubic centimeters

8702.10.9900 Used

8702.20.0000 With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion

8702.20.1000 Of a cylinder capacity exceeding 2 500 cm3

8702.20.9000 Of a cylinder capacity not exceeding 2 500 cm3

8702.30.0000 With both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion

8702.30.1000 Of a cylinder capacity exceeding 2 800 cm3

8702.30.9000 Of a cylinder capacity not exceeding 2 800 cm3

8702.40.0000 With only electric motor for propulsion

8702.90.0000 Other

8702.90.1100 With spark-ignition internal combustion piston engine

8702.90.1900 Used

8702.90.3100 Of a cylinder capacity not exceeding 2 800 cubic centimeters

8702.90.3900 Used

8702.90.9000 With other engines

8703.00.0000 Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702), including station wagons and racing cars

Show details

8703.10.0000 Vehicles specially designed for travelling on snow; golf cars and similar vehicles

8703.10.1100 Vehicles specially designed for travelling on snow, with compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine

8703.10.1800 Other

8703.21.0000 Other vehicles, with spark-ignition internal combustion reciprocating piston engine

8703.21.1000 New

8703.21.9000 Used

8703.22.0000 Of a cylinder capacity exceeding 1 000 cubic centimeters but not exceeding 1 500 cubic centimeters

8703.22.1000 New

8703.22.9000 Used

8703.23.0000 Of a cylinder capacity exceeding 1 500 cubic centimeters but not exceeding 3 000 cubic centimeters

8703.23.1100 New

8703.23.1900 Other

8703.23.9000 Used

8703.24.0000 Of a cylinder capacity exceeding 3 000 cubic centimeters

8703.24.1000 New

8703.24.9000 Used

8703.31.0000 Of a cylinder capacity not exceeding 1 500 cm3

8703.31.1000 New

8703.31.9000 Used

8703.32.0000 Of a cylinder capacity exceeding 1 500 cubic centimeters but not exceeding 2 500 cubic centimeters

8703.32.1100 New

8703.32.1900 Other

8703.32.9000 Used

8703.33.0000 Of a cylinder capacity exceeding 2 500 cubic centimeters

8703.33.1100 New

8703.33.1900 Other

8703.33.9000 Used

8703.40.0000 Other vehicles, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power

8703.40.1000 New

8703.40.1010 Of a cylinder capacity not exceeding 1 000 cm3

8703.40.1090 Other

8703.40.9000 Used

8703.40.9010 Of a cylinder capacity not exceeding 1 000 cm3

8703.40.9090 Other

8703.50.0000 Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power

8703.60.0000 Other vehicles, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power

8703.60.1000 New

8703.60.1010 Of a cylinder capacity not exceeding 1 000 cm3

8703.60.1090 Other

8703.60.9000 Used

8703.60.9010 Of a cylinder capacity not exceeding 1 000 cm3

8703.60.9090 Other

8703.70.0000 Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power

8703.80.0000 Other vehicles, with only electric motor for propulsion

8703.80.1000 New

8703.80.9000 Used

8703.90.0000 Other

8704.00.0000 Motor vehicles for the transport of goods

Show details

8704.10.0000 Dumpers designed for off-highway use

8704.10.1000 With compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine

8704.10.9000 Other

8704.21.0000 Other, with compression-ignition internal combustion piston engine (diesel or semi-diesel)

8704.21.1000 Specially designed for the transport of highly radioactive materials

8704.21.3100 Other

8704.21.3900 Used

8704.21.9100 With engines of a cylinder capacity not exceeding 2 500 cubic centimeters

8704.21.9900 Used

8704.22.0000 Of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes

8704.22.1000 Specially designed for the transport of highly radioactive materials

8704.22.9100 Other

8704.22.9900 Used

8704.23.0000 Of a gross vehicle weight exceeding 20 tonnes

8704.23.1000 Specially designed for the transport of highly radioactive materials

8704.23.9100 Other

8704.23.9900 Used

8704.31.0000 Other, with spark-ignition internal combustion piston engine

8704.31.1000 Specially designed for the transport of highly radioactive materials

8704.31.3100 Other

8704.31.3900 Used

8704.31.9100 With engines of a cylinder capacity not exceeding 2 800 cubic centimeters

8704.31.9900 Used

8704.32.0000 Of a gross vehicle weight exceeding 5 tonnes

8704.32.1000 Specially designed for the transport of highly radioactive materials

8704.32.9100 Other

8704.32.9900 Used

8704.40.0000 Other, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion :

8704.41.0000 Of a gross vehicle weight not exceeding 5 tonnes :

8704.41.1000 Specially designed for the transport of highly radioactive materials

8704.41.3000 Other :

8704.41.3100 With engines of a cylinder capacity exceeding 2 500 cm3 :

8704.41.3900 Used

8704.41.9100 With engines of a cylinder capacity not exceeding 2 500 cm3 :

8704.41.9900 Used

8704.42.0000 Of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes :

8704.42.1000 Specially designed for the transport of highly radioactive materials

8704.42.9000 Other

8704.42.9100 New

8704.42.9900 Used

8704.43.0000 Of a gross vehicle weight exceeding 20 tonnes

8704.43.1000 Specially designed for the transport of highly radioactive materials

8704.43.9000 Other

8704.43.9100 New

8704.43.9900 Used

8704.50.0000 Other, with both spark-ignition internal combustion piston engine and electric motor as motors for propulsion

8704.51.0000 Of a gross vehicle weight not exceeding 5 tonnes :

8704.51.1000 Specially designed for the transport of highly radioactive materials

8704.51.3000 Other

8704.51.3100 With engines of a cylinder capacity exceeding 2 800 cm3 :

8704.51.3900 Used

8704.51.9100 With engines of a cylinder capacity not exceeding 2 800 cm3 :

8704.51.9900 Used

8704.52.0000 Of a gross vehicle weight exceeding 5 tonnes :

8704.52.1000 Specially designed for the transport of highly radioactive materials

8704.52.9000 Other :

8704.52.9100 New

8704.52.9900 Used

8704.60.0000 Other with only electric motor for propulsion

8704.90.0000 Other

8705.00.0000 Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile work

Show details

8705.10.0000 Crane lorries

8705.20.0000 Mobile drilling derricks

8705.30.0000 Fire fighting vehicles

8705.40.0000 Concrete-mixer lorries

8705.90.0000 Other

8705.90.3000 Concrete-pumping vehicles

8705.90.8000 Other

8706.00.0000 Chassis fitted with engines, for the motor vehicles of headings 8701 to 8705

Show details

8706.00.1100 Chassis for tractors of heading 8701; chassis for motor vehicles of heading 8702, 8703 or 8704, with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity exceeding 2 500 cubic centimeters or with a

8706.00.1900 Other

8706.00.9100 Other

8706.00.9900 Other

8707.00.0000 Bodies (including cabs), for the motor vehicles of headings 8701 to 8705

Show details

8707.10.0000 For the vehicles of heading 8703

8707.10.1000 For industrial assembly purposes

8707.10.9000 Other

8707.90.0000 Other

8707.90.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cubic ce

8707.90.9000 Other

8708.00.0000 Parts and accessories of the motor vehicles of headings 8701 to 8705

Show details

8708.10.0000 Bumpers and parts thereof

8708.10.1000 For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cubic centimeters or with a spark-ig

8708.10.1010 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87

8708.10.1090 Other

8708.10.9000 Other

8708.10.9010 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87

8708.10.9090 Other

8708.21.0000 Other parts and accessories of bodies (including cabs)

8708.21.1000 For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition interna

8708.21.9000 Other

8708.22.0000 Front windscreens (windshields), rear windows and other windows specified in subheading note 1 to this chapter

8708.22.1000 For the industrial assembly of:Pedestrian-controlled tractors of subheading 8701 10;Vehicles of heading 8703;Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not e

8708.22.9000 Other

8708.29.0000 Other

8708.29.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no

8708.29.9000 Other

8708.30.0000 Brakes and servo-brakes; parts thereof

8708.30.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.30.1020 Motor powered brake actuation unit with a rating of 13.5 V (±0.5V) and a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles

8708.30.1040 Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

8708.30.1060 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87

8708.30.1070 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

8708.30.1090 Other

8708.30.9100 Other

8708.30.9120 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87

8708.30.9130 Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

8708.30.9140 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

8708.30.9160 Motor powered brake actuation unit - with a rating of 13.5 V (plus or minus 0.5 V) and - a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles

8708.30.9190 Other

8708.30.9900 Other

8708.30.9910 Motor powered brake actuation unit - with a rating of 13.5 V (plus or minus 0.5 V) and - a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles

8708.30.9990 Other

8708.40.0000 Gear boxes and parts thereof

8708.40.2000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.40.2020 Automatic hydrodynamic gearbox with a hydraulic torque converter, without transfer box and cardan shaft, whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87

8708.40.2050 Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting: -cast aluminium body,-differential gear, -2 electrical motors and gears, with the dimensions of: -a width of 280 mm or more but not mor

8708.40.2060 Automatic transmission assembly with rotary gear shifter with: -aluminium casting housing, -differential gear, -9 Speed automatic, -electronic range select gear selection system, with dimensions of: -a width of 330 mm or more but not more than 420 mm, -a

8708.40.2070 Manual gearbox in cast aluminium housing with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five gears, -a differential gear, -an engine torque of 250 Nm or less, -for transverse installation, fo

8708.40.2080 Transmission gearbox without torque converter, with:

8708.40.2090 Other

8708.40.5000 Other

8708.40.5010 Automatic hydrodynamic gearbox

8708.40.5040 Transmission unit with three additional axles on the inside and with a gear shift switch, consisting of - a casting of cast aluminum, - a differential gear, - two electric motors and gears with the following dimensions: - a width of 300 mm or more but max

8708.40.5050 Automatic transmission assembly with rotary gear shifter withaluminium casting housing, differential gear,9 Speed automatic

8708.40.5060 Manual gearbox in cast aluminium housing with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five gears, -a differential gear, -an engine torque of 250 Nm or less, -for transverse installation, fo

8708.40.5070 Automatic transmission equipped with double clutch system with:；-at least 8gears,；-an engine torque of 800Nm or more,；-an electronic differential,；-a P-lock safety system,and；-a TCU transmission control unit,for use in the manufacture of motor vehicles of

8708.40.5090 Other

8708.40.9100 Parts

8708.40.9900 Other

8708.50.0000 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof

8708.50.2000 For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cubic centimeters or with a spark-ig

8708.50.2015 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

8708.50.2018 Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yok

8708.50.2020 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle of a length of 1 m or more but not more than 2 m, of a weight of 6 kg or more but not more than 9 kg

8708.50.2025 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external invol

8708.50.2035 Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or mor

8708.50.2045 Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached a

8708.50.2050 Double flange bearing of 3rd generation, for motor vehicles, with double-row ball bearing, whether or not with impulse (encoder) ring, whether or not with antilock brake system (ABS) sensor, whether or not with mounted screws, for use in the manufacture o

8708.50.2055 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

8708.50.2060 Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising: at least an actuator, whether or not an interior distribution by c

8708.50.2065 Intermediate steel shaft connecting the gearbox with semi-axle with: -a length of 300 mm or more but not more than 650 mm, -a spline end on both sides, -whether or not with a pressed bearing in the case, -whether or not with a holder for use in the manufa

8708.50.2070 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 2

8708.50.2075 Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: -an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm, -an

8708.50.2090 Other

8708.50.3500 Other

8708.50.5500 Parts

8708.50.5520 Bearings with two third-generation flanges for motor vehicles, - with two-row ball bearings, - with or without impulse ring (encoder), - with or without ABS sensor, - with or without mounted screws, for use in manufacturing of goods of Chapter 87

8708.50.5550 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

8708.50.5590 Other

8708.50.9100 Other

8708.50.9110 Bearing with two third-generation flanges for motor vehicles, - with two-row ball bearings, - with or without impulse ring (encoder), - with or without ABS sensor, - with or without mounted screws, for use in Manufacture of goods of Chapter 87

8708.50.9190 Other

8708.50.9900 Other

8708.50.9910 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weightof 6 kg or more but not more than 9 kg

8708.50.9915 Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 x 570 x 510 mm, comprising at least:an actuator, and a interior distribution by chain

8708.50.9920 Intermediate steel shaft connecting the gearbox with semi-axle with:a length of 300 mm or more but not more than 650 mma spline end on both sides

8708.50.9925 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:an outer diameter of 67,0 mm or more but not more than 84,5 mm,3 cold calibrated roller tracks with a diameter of 29,90

8708.50.9935 Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm

8708.50.9940 Bearing with two third-generation flanges for motor vehicles, - with two-row ball bearings, - with or without impulse ring (encoder), - with or without ABS sensor, - with or without mounted screws, for use in Manufacture of goods of Chapter 87

8708.50.9945 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external invol

8708.50.9950 Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or mor

8708.50.9955 Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached a

8708.50.9960 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

8708.50.9990 Other

8708.70.0000 Road wheels and parts and accessories thereof

8708.70.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.70.1010 Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres

8708.70.1015 fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708.70.1050 Other

8708.70.1080 fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708.70.1085 Other

8708.70.1092 fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708.70.1095 Other

8708.70.5000 Other

8708.70.5010 Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres

8708.70.5015 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708.70.5050 Other

8708.70.5080 Other

8708.70.5085 Other

8708.70.9100 Wheel centres in star form, cast in one piece, of iron or steel

8708.70.9115 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8708.70.9190 Other

8708.70.9900 Other

8708.70.9920 Road wheels of steel, whether or not with their accessories

8708.70.9930 Other

8708.70.9980 Other

8708.70.9985 Other

8708.80.0000 Suspension systems and parts thereof (including shock-absorbers)

8708.80.2000 For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cubic centimeters or with a spark-ig

8708.80.2010 Upper strut insulator containing a metal holder with three mounting screws, and a rubber bump for use in the manufacture of goods of Chapter 87

8708.80.2090 Other

8708.80.3500 Other

8708.80.3510 Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bump of a kind used in the manufacture of goods of Chapter 87

8708.80.3590 Other

8708.80.5500 Anti roll bars; other torsion bars

8708.80.9100 Other

8708.80.9900 Other

8708.80.9920 Aluminium suspension link arm, with dimensions of:a height of 50 mm or more but not more than 150 mm,a width of 10 mm or more but not more than 100 mm,a length of 100 mm or more but not more than 600 mm,a mass of 1000 g or more but not more than 3000 g

8708.80.9930 Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: -with a chrome coating, -of a diameter of 11 mm or more, but not more than 28 mm, -of a length of 80 mm or more, but not more than 600 mm, with a thread

8708.80.9990 Other

8708.91.0000 Other parts and accessories

8708.91.2000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.91.2020 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

8708.91.2030 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: an insulating area flatness of not more than 0,1 mm, a permissible particle quantity of 0,3 mg per tank, a distance between pores of 2 mm or more, pore sizes of not more t

8708.91.2090 Other

8708.91.3500 Other

8708.91.3510 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

8708.91.3520 Turbocharger cooling duct containing: -an aluminum alloy duct with at least one metal holder and at least two mounting holes, -a rubber pipe with clips, -a stainless steel flange highly resistant to corrosion [SUS430JIL], for use in the manufacture of com

8708.91.3590 Other

8708.91.9100 Parts

8708.91.9900 Other

8708.91.9920 Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads fo

8708.91.9930 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of no

8708.91.9940 Assembly for supplying compressed air, whether or not with a resonator, comprising at least: - one solid aluminium tube whether or not with mounting bracket, - one flexible rubber hose, and - one metal clip for use in the manufacture of goods of Chapter 8

8708.91.9990 Other

8708.92.0000 Silencers (mufflers) and exhaust pipes; parts thereof

8708.92.2000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no

8708.92.3500 Other

8708.92.9100 Parts

8708.92.9900 Other

8708.92.9910 Exhaust system inner liner :-with a wall thickness of 0,7 mm or more but not more than 1,3 mm,made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088

8708.92.9920 Pipe for guiding exhaust gases from the combustion engine:with a diameter of 40 mm or more but not more than 100 mm,with a length of 90 mm or more but not more than 410 mm

8708.92.9930 Exhaust system end cover: -with a wall thickness of 0,7 mm or more but not more than 1,3 mm, -made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088, -whether or not with inner liner, -whether or not with surface treatment for use

8708.92.9990 Other

8708.93.0000 Clutches and parts thereof

8708.93.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.93.1040 Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: cruise control reset, electronic parking brake release, -start and stop engine management under Idle Stop and Go system (ISG), for use in the man

8708.93.1090 Other

8708.93.9000 Other

8708.93.9040 Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: cruise control reset, electronic parking brake release, -start and stop engine management under Idle Stop and Go system (ISG), for use in the man

8708.93.9090 Other

8708.94.0000 Steering wheels, steering columns and steering boxes; parts thereof

8708.94.2000 For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cubic centimeters or with a spark-ig

8708.94.2010 Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87

8708.94.2090 Other

8708.94.3500 Other

8708.94.3520 Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87

8708.94.3590 Other

8708.94.9100 Parts

8708.94.9900 Other

8708.95.0000 Safety airbags with inflator system; parts thereof

8708.95.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.95.1020 Inflatable safety cushion of high strength polyamide fibre: sewn, folded, with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing suitable for cool inflator technology

8708.95.1030 Inflatable sewn safety cushion of high strength polyamide fibre:

8708.95.1090 Other

8708.95.9100 Other

8708.95.9900 Other

8708.95.9930 Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulatedair bag sealing - suitable for cool inflator technology

8708.95.9940 Inflatable sewn safety cushion of high strength polyamide fibre:

8708.95.9950 Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1000pieces or more

8708.95.9990 Other

8708.99.0000 Other

8708.99.1000 For the industrial assembly of: Pedestrian-controlled tractors of subheading 8701 10; Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustionpiston engine (diesel or semi-diesel) of a cylinder capacity not

8708.99.1025 Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles

8708.99.1055 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with o

8708.99.1060 Aluminium engine bracket, with dimensions of: height of more than 10 mm but not more than 200 mm width of more than 10 mm but not more than 200 mm length of more than 10 mm but not more than 200 mm equipped with at least two fixing holes, made of aluminiu

8708.99.1090 Other

8708.99.9300 Of closed-die forged steel

8708.99.9700 Other

8708.99.9718 with a hydro pump and a differential with wheel axle, -whether or not with a fan impeller and/or a pulley, for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90, whose main function is that of a lawn mower

8708.99.9722 Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with o

8708.99.9728 A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames: -cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

8708.99.9738 A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames: -made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon

8708.99.9740 Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads fo

8708.99.9745 Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles

8708.99.9750 Aluminium engine bracket, with dimensions of: - height of more than 10 mm but not more than 200 mm - width of more than 10 mm but not more than 200 mm - length of more than 10 mm but not more than 200 mm equipped with at least two fixing holes, made of al

8708.99.9755 Assembly for supplying compressed air, whether or not with a resonator, comprising at least:- one solid aluminium tube whether or not with mounting bracket,- one flexible rubber hose, and- one metal clip for use in the manufacture of goods of Chapter 87

8708.99.9775 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87

8708.99.9790 Other

8709.00.0000 Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the fore

Show details

8709.11.0000 Vehicles

8709.11.1000 Specially designed for the transport of highly radioactive materials

8709.11.9000 Other

8709.19.0000 Other

8709.19.1000 Specially designed for the transport of highly radioactive materials

8709.19.9000 Other

8709.90.0000 Parts

8710.00.0000 Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles

8711.00.0000 Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars

Show details

8711.10.0000 With reciprocating internal combustion piston engine of a cylinder capacity not exceeding 50 cubic centimeters

8711.20.0000 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 50 cubic centimeters but not exceeding 250 cubic centimeters

8711.20.1000 Scooters

8711.20.9200 Other, of a cylinder capacity

8711.20.9800 Exceeding 125 cubic centimeters but not exceeding 250 cubic centimeters

8711.30.0000 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 250 cubic centimeters but not exceeding 500 cubic centimeters

8711.30.1000 Of a cylinder capacity exceeding 250 cubic centimeters but not exceeding 380 cubic centimeters

8711.30.9000 Of a cylinder capacity exceeding 380 cubic centimeters but not exceeding 500 cubic centimeters

8711.40.0000 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 500 cubic centimeters but not exceeding 800 cubic centimeters

8711.50.0000 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 800 cubic centimeters

8711.60.0000 With electric motor for propulsion

8711.60.1000 Bicycles, tricycles and quadricycles, with pedal assistance, with an auxiliary electric motor with a continuous rated power not exceeding 250 watts

8711.60.9000 Other

8711.60.9010 Cycles, with pedal assistance, with an auxiliary electric motor

8711.60.9090 Other

8711.90.0000 Other

8712.00.0000 Bicycles and other cycles (including delivery tricycles), not motorised

Show details

8712.00.3000 Bicycles with ball bearings

8712.00.3010 Consigned from Indonesia, Malaysia, Sri Lanka or Tunisia

8712.00.3020 Consigned from Cambodia, Pakistan or the Philippines

8712.00.3090 Other

8712.00.7000 Other

8712.00.7010 Unicycles

8712.00.7091 Other

8712.00.7092 Consigned from Cambodia, Pakistan or the Philippines

8712.00.7099 Other

8713.00.0000 Carriages for disabled persons, whether or not motorised or otherwise mechanically propelled

Show details

8713.10.0000 Not mechanically propelled

8713.90.0000 Other

8714.00.0000 Parts and accessories of vehicles of headings 8711 to 8713

Show details

8714.10.0000 Of motorcycles (including mopeds)

8714.10.1000 Brakes and parts thereof

8714.10.2000 Gear boxes and parts thereof

8714.10.3000 Road wheels and parts and accessories thereof

8714.10.4000 Silencers (mufflers) and exhaust pipes; parts thereof

8714.10.5000 Clutches and parts thereof

8714.10.9000 Other

8714.10.9010 Inner tubes, - of SAE1541 carbon steel - with a hard chromium layer of 20 Amicro m (+15 Amicro m/-5 Amicro m) - having a wall thickness of 1,45 mm or more, but not more than 1,5 mm - having an elongation at break of 15 % - slotted of a kind used for the p

8714.10.9070 Motor bikes radiators in consignment of 100 pieces or more

8714.10.9090 Other

8714.20.0000 Of carriages for disabled persons

8714.91.0000 Other

8714.91.1000 Frames

8714.91.1021 Painted, anodised, polished and/or lacquered

8714.91.1025 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)

8714.91.1029 Other

8714.91.1031 Other

8714.91.1035 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)

8714.91.1039 Other

8714.91.1070 Other

8714.91.1075 Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)

8714.91.1077 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)

8714.91.1089 Other

8714.91.3000 Front forks

8714.91.3025 Painted, anodised, polished and/or lacquered

8714.91.3029 Other

8714.91.3035 Other

8714.91.3039 Other

8714.91.3072 Other

8714.91.3089 Other

8714.91.9000 Parts

8714.92.0000 Wheel rims and spokes

8714.92.1000 Rims

8714.92.9000 Spokes

8714.93.0000 Hubs, other than coaster braking hubs and hub brakes, and free-wheel sprocket-wheels

8714.93.0011 Free-wheel sprocket-wheels

8714.93.0019 Other

8714.93.0090 Other

8714.94.0000 Brakes, including coaster braking hubs and hub brakes, and parts thereof

8714.94.2000 Brakes

8714.94.2005 Coaster braking hubs and hub brakes

8714.94.2091 Other brakes

8714.94.2099 Other

8714.94.9000 Parts

8714.94.9011 Brake levers

8714.94.9019 Other

8714.94.9090 Other

8714.95.0000 Saddles

8714.96.0000 Pedals and crank-gear, and parts thereof

8714.96.1000 Pedals

8714.96.1010 Pedals, for use in the manufacture of bicycles

8714.96.1090 Other

8714.96.3000 Crank-gear

8714.96.3010 Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties

8714.96.3090 Other

8714.96.9000 Parts

8714.99.0000 Other

8714.99.1000 Handlebars

8714.99.1010 Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties

8714.99.1020 Bicycle handlebars,- with or without integrated stem,- made out of carbon fibres and synthetic resin,for use in the manufacture of bicycles

8714.99.1029 Other

8714.99.1089 Bicycle handlebars,- with or without integrated stem,- made out of carbon fibres and synthetic resin,for use in the manufacture of bicycles

8714.99.1090 Other

8714.99.1099 Other

8714.99.3000 Luggage carriers

8714.99.5000 Derailleur gears

8714.99.5011 with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)

8714.99.5019 Other

8714.99.5091 with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)

8714.99.5099 Other

8714.99.9000 Other; parts

8714.99.9011 Complete wheels with or without tubes, tyres and sprockets

8714.99.9019 Other

8714.99.9030 Seat posts, for use in the manufacture of bicycles

8714.99.9040 Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)

8714.99.9050 Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles

8714.99.9089 Other

8715.00.0000 Baby carriages and parts thereof

Show details

8715.00.1000 Baby carriages

8715.00.9000 Parts

8716.00.0000 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof

Show details

8716.10.0000 Trailers and semi-trailers of the caravan type, for housing or camping

8716.10.9200 Of a weight not exceeding 1 600 kg

8716.10.9800 Of a weight exceeding 1 600 kg

8716.20.0000 Self-loading or self-unloading trailers and semi-trailers for agricultural purposes

8716.31.0000 Other trailers and semi-trailers for the transport of goods

8716.39.0000 Other

8716.39.1000 Specially designed for the transport of highly radioactive materials

8716.39.3000 Other

8716.39.5000 Other

8716.39.8000 Used

8716.40.0000 Other trailers and semi-trailers

8716.80.0000 Other vehicles

8716.90.0000 Parts

8716.90.1000 Chassis

8716.90.3000 Bodies

8716.90.5000 Axles

8716.90.9000 Other parts

8716.90.9010 Aluminium road wheels of vehicles of CN heading 8716, whether or not with their accessories and whether or not fitted with tyres

8716.90.9015 Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

8716.90.9050 Other

8716.90.9095 Road wheels of steel, whether or not with their accessories

8716.90.9096 Other

8716.90.9097 Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres

8716.90.9098 Other