HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10.0000
Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus
7201.20.0000
Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus
7201.50
Alloy pig iron; spiegeleisen
7201.50.3000
Alloy pig iron
7201.50.6000
Spiegeleisen
7202
Ferroalloys
Show details
7202.11
Containing by weight more than 2 percent of carbon
7202.11.1000
Containing by weight more than 2 percent but not more than 4 percent of carbon
7202.11.5000
Containing by weight more than 4 percent of carbon
7202.19
Other
7202.19.1000
Containing by weight not more than 1 percent of carbon
7202.19.5000
Containing by weight more than 1 percent but not more than 2 percent of carbon
7202.21
Containing by weight more than 55 percent of silicon
7202.21.1000
Containing by weight more than 3 percent of calcium
7202.21.5000
Other
7202.21.7500
Containing by weight more than 80 percent but not more than 90 percent of silicon
7202.21.9000
Containing by weight more than 90 percent of silicon
7202.29.00
Other
7202.29.0010
Containing by weight over 2 percent of magnesium
7202.29.0050
Other
7202.30.0000
Ferrosilicon manganese
7202.41.0000
Containing by weight more than 4 percent of carbon
7202.49
Other
7202.49.1000
Containing by weight more than 3 percent of carbon
7202.49.50
Other
7202.49.5010
Containing by weight more than 0.5 percent of carbon
7202.49.5090
Other
7202.50.0000
Ferrosilicon chromium
7202.60.0000
Ferronickel
7202.70.0000
Ferromolybdenum
7202.80.0000
Ferrotungsten and ferrosilicon tungsten
7202.91.0000
Ferrotitanium and ferrosilicon titanium
7202.92.0000
Ferrovanadium
7202.93
Ferroniobium
7202.93.4000
Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
7202.93.8000
Other
7202.99
Other
7202.99.1000
Ferrozirconium
7202.99.2000
Calcium silicon
7202.99.80
Other
7202.99.8020
Ferrophosphorus
7202.99.8040
Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms
Show details
7203.10.0000
Ferrous products obtained by direct reduction of iron ore
7203.90.0000
Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
7204.10.0000
Waste and scrap of cast iron
7204.21.0000
Of stainless steel
7204.29.0000
Other
7204.30.0000
Waste and scrap of tinned iron or steel
7204.41.00
Turnings, shavings, chips, milling waste, sawdust, fillings, trimmings and stampings, whether or not in bundles
7204.41.0020
No. 1 bundles
7204.41.0040
No. 2 bundles
7204.41.0060
Borings, shovelings and turnings
7204.41.0080
Other
7204.49.00
Other
7204.49.0020
No. 1 heavy melting
7204.49.0040
No. 2 heavy melting
7204.49.0060
Cut plate and structural
7204.49.0070
Shredded
7204.49.0080
Other
7204.50.0000
Remelting scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.0000
Granules
7205.21.0000
Of alloy steel
7205.29.0000
Other
7206
Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)
Show details
7206.10.0000
Ingots
7206.90.0000
Other
7207
Semifinished products of iron or nonalloy steel
Show details
7207.11.0000
Of rectangular (including square) cross section, the width measuring less than twice the thickness
7207.12.00
Other, of rectangular (other than square) cross section
7207.12.0010
Having a width measuring less than four times the thickness
7207.12.0050
Having a width measuring at least four times the thickness
7207.19.00
Other
7207.19.0030
Of circular cross section
7207.19.0090
Other
7207.20.00
Containing by weight 0.25 percent or more of carbon
7207.20.0025
Having a width measuring less than four times the thickness
7207.20.0045
Having a width measuring at least four times the thickness
7207.20.0075
Of circular cross section
7207.20.0090
Other
7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10
In coils, not further worked than hot-rolled, with patterns in relief
7208.10.1500
Pickled
7208.10.3000
Of a thickness of 4.75 mm or more
7208.10.6000
Of a thickness of less than 4.75 mm
7208.25
Of a thickness of 4.75 mm or more
7208.25.3000
Of high-strength steel
7208.25.6000
Other
7208.26.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.26.0030
High-strength steel
7208.26.0060
Other
7208.27.00
Of a thickness of less than 3 mm
7208.27.0040
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7208.27.0045
Other
7208.27.0060
Other
7208.36.00
Of a thickness exceeding 10 mm
7208.36.0030
High-strength steel
7208.36.0060
Other
7208.37.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.37.0030
High-strength steel
7208.37.0060
Other
7208.38.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.0015
High-strength steel
7208.38.0030
With untrimmed edges
7208.38.0090
Other
7208.39.00
Of a thickness of less than 3 mm
7208.39.0020
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7208.39.0025
Other
7208.39.0030
With untrimmed edges
7208.39.0090
Other
7208.40
Not in coils, not further worked than hot-rolled, with patterns in relief
7208.40.30
Of a thickness of 4.75 mm or more
7208.40.3030
Of a thickness exceeding 10 mm
7208.40.3060
Other
7208.40.60
Of a thickness of less than 4.75 mm
7208.40.6030
Of a thickness less than 3 mm
7208.40.6060
Other
7208.51.00
Of a thickness exceeding 10 mm
7208.51.0030
Universal mill plate
7208.51.0045
Of high-strength steel
7208.51.0060
Other
7208.52.0000
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.53.0000
Of a thickness of 3 mm or more but less than 4.75 mm
7208.54.0000
Of a thickness of less than 3 mm
7208.90.0000
Other
7209
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Show details
7209.15.0000
Of a thickness of 3 mm or more
7209.16.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.16.0040
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7209.16.0045
Other
7209.16.0060
Other
7209.16.0070
Annealed
7209.16.0091
Other
7209.17.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.17.0040
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7209.17.0045
Other
7209.17.0060
Other
7209.17.0070
Annealed
7209.17.0091
Other
7209.18
Of a thickness of less than 0.5 mm
7209.18.15
Of high-strength steel
7209.18.1530
Annealed
7209.18.1560
Other
7209.18.25
Of a thickness of less than 0.361 mm (blackplate)
7209.18.2520
Annealed
7209.18.2585
Other
7209.18.60
Other
7209.18.6020
Annealed
7209.18.6090
Other
7209.25.0000
Of a thickness of 3 mm or more
7209.26.0000
Of a thickness exceeding 1 mm but less than 3 mm
7209.27.0000
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.28.0000
Of a thickness of less than 0.5 mm
7209.90.0000
Other
7210
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated
Show details
7210.11.0000
Of a thickness of 0.5 mm or more
7210.12.0000
Of a thickness of less than 0.5 mm
7210.20.0000
Plated or coated with lead, including terne-plate
7210.30.00
Electrolytically plated or coated with zinc
7210.30.0030
Of high-strength steel
7210.30.0060
Other
7210.41.0000
Corrugated
7210.49.00
Other
7210.49.0040
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7210.49.0045
Other
7210.49.0091
Of a thickness of 0.4 mm or more
7210.49.0095
Other
7210.50
Plated or coated with chromium oxides or with chromium and chromium oxides
7210.50.0020
Of a width less than 1050 mm
7210.50.0090
Other
7210.61.0000
Plated or coated with aluminum-zinc alloys
7210.69.0000
Other
7210.70
Painted, varnished or coated with plastics
7210.70.3000
Not coated or plated with metal and not clad
7210.70.60
Other
7210.70.6030
Electrolytically coated or plated
7210.70.6060
Other
7210.70.6090
Other
7210.90
Other
7210.90.1000
Clad
7210.90.6000
Electrolytically coated or plated with base metal
7210.90.9000
Other
7211
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.13.0000
Universal mill plate
7211.14.00
Other, of a thickness of 4.75 mm or more
7211.14.0030
Of high-strength steel
7211.14.0045
Not in coils
7211.14.0090
Other
7211.19
Other
7211.19.1500
Of high-strength steel
7211.19.2000
Of a thickness exceeding 1.25 mm
7211.19.3000
Other
7211.19.4500
Of high-strength steel
7211.19.6000
Pickled
7211.19.75
Other
7211.19.7530
With untrimmed edges
7211.19.7560
Other
7211.19.7590
Other
7211.23
Containing by weight less than 0.25 percent of carbon
7211.23.1500
Of high-strength steel
7211.23.2000
Other
7211.23.3000
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7211.23.4500
Of a thickness not exceeding 0.25 mm
7211.23.60
Other
7211.23.6030
Of a thickness exceeding 1.25 mm
7211.23.6060
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7211.23.6090
Of a thickness not exceeding 0.25 mm
7211.29
Other
7211.29.20
Of a thickness exceeding 0.25 mm
7211.29.2030
Of a width less than 51 mm, in coils
7211.29.2090
Other
7211.29.4500
Other
7211.29.60
Other
7211.29.6030
Of a thickness exceeding 1.25 mm
7211.29.6080
Other
7211.90.0000
Other
7212
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated
Show details
7212.10.0000
Plated or coated with tin
7212.20.0000
Electrolytically plated or coated with zinc
7212.30
Otherwise plated or coated with zinc
7212.30.10
Of a thickness exceeding 0.25 mm or more
7212.30.1030
Of a width less than 51 mm, in coils
7212.30.1090
Other
7212.30.3000
Other
7212.30.5000
Other
7212.40
Painted, varnished or coated with plastics
7212.40.1000
Of a width of less than 300 mm
7212.40.5000
Other
7212.50.0000
Otherwise plated or coated
7212.60.0000
Clad
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel
Show details
7213.10.0000
Concrete reinforcing bars and rods
7213.20.00
Other, of free-cutting steel
7213.20.0010
Containing by weight 0.1 percent or more of lead
7213.20.0080
Other
7213.91
Of circular cross section measuring less than 14 mm in diameter
7213.91.30
Not tempered, not treated and not partly manufactured
7213.91.3011
Tire cord-quality steel wire rod as defined in statistical note 4 of this chapter
7213.91.3015
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
7213.91.3020
Of welding quality wire rods as defined in statistical note 6 to this chapter
7213.91.3093
Other
7213.91.4500
Containing by weight 0.6 percent or more of carbon
7213.91.6000
Other
7213.99.00
Other
7213.99.0030
With a diameter of 14 mm or more but less than 19 mm
7213.99.0060
With a diameter of 19 mm or more
7213.99.0090
Other
7214
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Show details
7214.10.0000
Forged
7214.20.0000
Concrete reinforcing bars and rods
7214.30.00
Other, of free-cutting steel
7214.30.0010
Containing by weight 0.1 percent or more of lead
7214.30.0080
Other
7214.91.00
Of rectangular (other than square) cross-section
7214.91.0016
With a maximum cross section less than 152 mm
7214.91.0020
With a maximum cross section of 152 mm or more
7214.91.0060
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7214.91.0090
Containing by weight 0.6 percent or more of carbon
7214.99.00
Other
7214.99.0016
With a diameter less than 76 mm
7214.99.0021
With a diameter of 76 mm or more but not exceeding 152 mm
7214.99.0026
With a diameter exceeding 152 mm
7214.99.0031
With a diameter less than 76 mm
7214.99.0036
With a diameter of 76 mm or more but not exceeding 152 mm
7214.99.0040
With a diameter exceeding 152 mm
7214.99.0045
Containing by weight 0.6 percent or more of carbon
7214.99.0060
Containing by weight less than 0.25 percent of carbon
7214.99.0075
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7214.99.0090
Containing by weight 0.6 percent or more of carbon
7215
Other bars and rods of iron or nonalloy steel
Show details
7215.10.00
Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.10.0010
Containing by weight 0.1 percent or more of lead
7215.10.0080
Other
7215.50.00
Other, not further worked than cold-formed or cold-finished
7215.50.0016
With a diameter less than 76 mm
7215.50.0018
With a diameter of 76 mm or more but not exceeding 228 mm
7215.50.0020
With a diameter exceeding 228 mm
7215.50.0061
With a diameter less than 76 mm
7215.50.0063
With a diameter of 76 mm or more but not exceeding 228 mm
7215.50.0065
With a diameter exceeding 228 mm
7215.50.0090
Containing by weight 0.6 percent or more of carbon
7215.90
Other
7215.90.1000
Not cold-formed
7215.90.3000
Cold-formed
7215.90.5000
Other
7216
Angles, shapes and sections of iron or nonalloy steel
Show details
7216.10.00
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.10.0010
U sections
7216.10.0050
Other
7216.21.0000
L sections
7216.22.0000
T sections
7216.31.0000
U sections
7216.32.0000
I sections (standard beams)
7216.33.00
H sections
7216.33.0030
Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm
7216.33.0060
Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm
7216.33.0090
Other
7216.40.00
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.40.0010
L sections
7216.40.0050
Other
7216.50.0000
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.61.0000
Obtained from flat-rolled products
7216.69.0000
Other
7216.91.00
Cold-formed or cold-finished from flat-rolled products
7216.91.0010
Drilled, notched, punched or cambered
7216.91.0090
Other
7216.99.00
Other
7216.99.0010
Drilled, notched, punched or cambered
7216.99.0090
Other
7217
Wire of iron or nonalloy steel
Show details
7217.10
Not plated or coated, whether or not polished
7217.10.1000
Of a thickness not exceeding 0.25 mm
7217.10.2000
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7217.10.3000
Of a thickness exceeding 1.25 mm
7217.10.40
With a diameter of less than 1.5 mm
7217.10.4040
In coils weighing not more than 2 kilograms
7217.10.4045
Other
7217.10.4090
Other
7217.10.50
With a diameter of 1.5 mm or more
7217.10.5030
Heat treated
7217.10.5090
Other
7217.10.6000
Other wire
7217.10.7000
Flat wire
7217.10.80
Round wire
7217.10.8010
Heat treated
7217.10.8020
Other
7217.10.8025
With a diameter of less than 1.0 mm
7217.10.8030
With a diameter of 1.0 mm or more but less than 1.5 mm
7217.10.8045
With a diameter of 1.5 mm or more
7217.10.8060
With a diameter of less than 1.0 mm
7217.10.8075
With a diameter of 1.0 mm or more but less than 1.5 mm
7217.10.8090
With a diameter of 1.5 mm or more
7217.10.9000
Other wire
7217.20
Plated or coated with zinc
7217.20.1500
Flat wire
7217.20.3000
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
7217.20.45
Other
7217.20.4510
Containing by weight less than 0.25 percent of carbon
7217.20.4520
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7217.20.4530
Containing by weight 0.6 percent or more of carbon
7217.20.4540
Containing by weight less than 0.25 percent of carbon
7217.20.4550
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7217.20.4560
Containing by weight 0.6 percent or more of carbon
7217.20.4570
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7217.20.4580
Containing by weight 0.6 percent or more of carbon
7217.20.6000
Containing by weight less than 0.25 percent of carbon
7217.20.7500
Other
7217.30
Plated or coated with other base metals
7217.30.15
Flat wire
7217.30.1530
Containing by weight 0.6 percent or more of carbon
7217.30.1560
Other
7217.30.3000
With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
7217.30.45
Other
7217.30.4504
Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding
7217.30.4511
Containing by weight less than 0.25 percent of carbon
7217.30.4520
Containing by weight 0.25 percent or more but less than 0.6 percent or carbon
7217.30.4530
Containing by weight 0.6 percent or more of carbon
7217.30.4541
Containing by weight less than 0.25 percent of carbon
7217.30.4550
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7217.30.4560
Containing by weight 0.6 percent or more of carbon
7217.30.4590
With a diameter of 1.5 mm or more
7217.30.6000
Containing by weight less than 0.25 percent of carbon
7217.30.7500
Other
7217.90
Other
7217.90.1000
Coated with plastics
7217.90.50
Other
7217.90.5030
Containing by weight less than 0.25 percent of carbon
7217.90.5060
Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7217.90.5090
Containing by weight 0.6 percent or more of carbon
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Show details
7218.10.0000
Ingots and other primary forms
7218.91.00
Of rectangular (other than square) cross-section
7218.91.0015
Having a cross-sectional area of less than 232 cm2
7218.91.0030
Having a cross-sectional area of 232 cm2 or more
7218.91.0060
Having a width at least four times the thickness
7218.99.00
Other
7218.99.0015
Having a cross-sectional area of less than 232 cm2
7218.99.0030
Having a cross-sectional area of 232 cm2 or more
7218.99.0045
Having a cross-sectional area of less than 232 cm2
7218.99.0060
Having a cross-sectional area of 232 cm2 or more
7218.99.0090
Other
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.11.00
Of a thickness exceeding 10 mm
7219.11.0030
Of a width not exceeding 1575 mm
7219.11.0060
Of a width exceeding 1575 mm
7219.12.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.12.0002
Not annealed or not pickled
7219.12.0006
Of high-nickel alloy steel
7219.12.0021
Of a width not exceeding 1575 mm
7219.12.0026
Of a width exceeding 1575 mm
7219.12.0051
Of a width not exceeding 1575 mm
7219.12.0056
Of a width exceeding 1575 mm
7219.12.0066
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.12.0071
Other
7219.12.0081
Other
7219.13.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.13.0002
Not annealed or not pickled
7219.13.0031
Of a width of 1370 mm or more
7219.13.0051
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.13.0071
Other
7219.13.0081
Other
7219.14.00
Of a thickness of less than 3 mm
7219.14.0030
Of a width of 1370 mm or more
7219.14.0065
Of high-nickel alloy steel
7219.14.0090
Other
7219.21.00
Of a thickness exceeding 10 mm
7219.21.0005
Of high-nickel alloy steel
7219.21.0020
Of a width not exceeding 1575 mm
7219.21.0040
Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.21.0060
Of a width exceeding 1880 mm
7219.22.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.22.0005
Of high-nickel alloy steel
7219.22.0015
Of a width not exceeding 1575 mm
7219.22.0020
Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.22.0025
Of a width exceeding 1880 mm
7219.22.0035
Of a width not exceeding 1575 mm
7219.22.0040
Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.22.0045
Of a width exceeding 1880 mm
7219.22.0070
Of a width not exceeding 1575 mm
7219.22.0075
Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.22.0080
Of a width exceeding 1880 mm
7219.23.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.23.0030
Of a width of 1370 mm or more
7219.23.0060
Other
7219.24.00
Of a thickness of less than 3 mm
7219.24.0030
Of a width of 1370 mm or more
7219.24.0060
Other
7219.31.00
Of a thickness of 4.75 mm or more
7219.31.0010
In coils
7219.31.0050
Not in coils
7219.32.00
Of a thickness of 3 mm or more but less than 4.75 mm
7219.32.0005
Of high-nickel alloy steel
7219.32.0020
Containing more than 0.5 percent by weight of nickel
7219.32.0025
Other
7219.32.0035
Of high-nickel alloy steel
7219.32.0036
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.32.0038
Other
7219.32.0042
Containing less than 15 percent by weight of chromium
7219.32.0044
Other
7219.32.0045
Of a width of 1370 mm or more
7219.32.0060
Other
7219.33.00
Of a thickness exceeding 1 mm but less than 3 mm
7219.33.0005
Of high-nickel alloy steel
7219.33.0020
Containing more than 0.5 percent by weight of nickel
7219.33.0025
Other
7219.33.0035
Of high-nickel alloy steel
7219.33.0036
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.33.0038
Other
7219.33.0042
Containing less than 15 percent by weight of chromium
7219.33.0044
Other
7219.33.0045
Of a width of 1370 mm or more
7219.33.0070
Containing more than 0.5 percent but less than 24 percent by weight of nickel
7219.33.0080
Other
7219.34.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.34.0005
Of high-nickel alloy steel
7219.34.0020
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.34.0025
Other
7219.34.0030
Containing less than 15 percent by weight of chromium
7219.34.0035
Other
7219.34.0050
Not in coils
7219.35.00
Of a thickness of less than 0.5 mm
7219.35.0005
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.35.0015
Other
7219.35.0030
Containing less than 15 percent by weight of chromium
7219.35.0035
Other
7219.35.0050
Not in coils
7219.90.00
Other
7219.90.0010
Of high-nickel alloy steel
7219.90.0020
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.90.0025
Other
7219.90.0060
Containing less than 15 percent by weight of chromium
7219.90.0080
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.11.0000
Of a thickness of 4.75 mm or more
7220.12
Of a thickness of less than 4.75 mm
7220.12.1000
Of a width of 300 mm or more
7220.12.5000
Of a width of less than 300 mm
7220.20
Not further worked than cold-rolled (cold-reduced)
7220.20.10
Of a width of 300 mm or more
7220.20.1010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7220.20.1015
Other
7220.20.1060
Containing less than 15 percent by weight of chromium
7220.20.1080
Other
7220.20.60
Of a thickness exceeding 1.25 mm
7220.20.6005
Of high-nickel alloy steel
7220.20.6010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7220.20.6015
Other
7220.20.6060
Containing less than 15 percent by weight of chromium
7220.20.6080
Other
7220.20.70
Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7220.20.7005
Of high-nickel alloy steel
7220.20.7010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7220.20.7015
Other
7220.20.7060
Containing less than 15 percent by weight of chromium
7220.20.7080
Other
7220.20.8000
Razor blade steel
7220.20.90
Other
7220.20.9030
Containing more than 0.5 percent but less than 24 percent by weight of nickel
7220.20.9060
Other
7220.90.00
Other
7220.90.0010
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7220.90.0015
Other
7220.90.0060
Containing less than 15 percent by weight of chromium
7220.90.0080
Other