HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
72.01.0000
Pig Ferro- and spiegeleisen in pigs, blocks and other primary forms
Show details
72.01.1000
Non- Alloy pig ferro- containing, by weight 0.5% or less sulfur
72.01.2000
Non- Alloy pig ferro- containing, by weight more than 0.5% sulfur
72.01.5000
Alloy pig ferro-, ferro- of the kind spiegeleisen
72.02.0000
Ferro- Alloys
Show details
72.02.1000
ferro- Manganese
72.02.1100
containing, by weight, more than 2% carbon
72.02.1900
Other
72.02.2000
ferro- aluminum
72.02.2100
containing, by weight, more than 55% silicon
72.02.2900
Other
72.02.3000
ferro- Silicon- Manganese
72.02.4000
ferro- chromium
72.02.4100
containing, by weight, more than 4% carbon
72.02.4900
Other
72.02.5000
ferro- Silicon- chromium
72.02.6000
ferro- Nickel
72.02.7000
ferro- Molybdenum
72.02.8000
ferro- Tungsten and ferro- Silicon- Tungsten
72.02.9000
Other
72.02.9100
ferro- - titanium and ferro- - Silicon- titanium
72.02.9200
ferro- - Vanadium
72.02.9300
ferro- - niobium
72.02.9900
Other
72.03.0000
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
Show details
72.03.1000
ferrous products obtained by Direct reduction of Iron ore
72.03.9000
Other
72.04.0000
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
72.04.1000
waste and scrap of cast Iron
72.04.2000
waste and scrap of Alloy steel
72.04.2100
of stainless steel
72.04.2900
Other
72.04.3000
waste and scrap of tinned Iron or steel
72.04.4000
Other waste and scrap
72.04.4100
turnings, shavings, chips, milling waste, Sawdust, filings, trimmings and stampings, whether or not in bundles
72.04.4900
Other
72.04.5000
remelting ferrous scrap ingots
72.05.0000
Granules and powders, of pig iron, spiegeleisen or iron and steel
Show details
72.05.1000
granules
72.05.2000
powders
72.05.2100
of Alloy steel
72.05.2900
Other
72.06.0000
Iron and non- Alloy steel in ingots or other primary forms (excluding iron of Item no.72.03)
Show details
72.06.1000
ingots
72.06.9000
Other
72.07.0000
Semi- Finished products of iron or non- Alloy steel
Show details
72.07.1000
containing, by weight less than 0.25% carbon
72.07.1100
of rectangular (including square) cross- section, the width measuring less than twice the thickness
72.07.1200
Other, of rectangular cross- section (Other than square)
72.07.1900
Other
72.07.2000
containing, by weight, 0.25% or more carbon
72.08.0000
Flat- Rolled products of non- Alloy iron or steel, of a width of 600 mm. or more, hot- Rolled, not clad, plated or covered
Show details
72.08.1000
in coils, not further worked than by hot- Rolling, with patterns in relief
72.08.2000
Other in coils, not further worked than by hot- Rolling, Pickled
72.08.2500
whose thickness is 4.75 mm or more
72.08.2600
whose thickness is 3 mm or more but less than 4.75 mm
72.08.2700
whose thickness is less than 3 mm
72.08.3000
Other, in coils, who have not been worked further than hot- Rolling
72.08.3600
whose thickness does not exceed 10 mm
72.08.3700
whose thickness is 4.75 mm or more but not more than 10 mm
72.08.3800
whose thickness is 3 mm or more but less than 4.75 mm
72.08.3900
whose thickness is less than 3 mm
72.08.4000
which are not in coils, which have not been worked further than hot- Rolling, with patterns in relief
72.08.5000
Other, not in coils, not worked further than hot- Rolling
72.08.5100
whose thickness does not exceed 10 mm
72.08.5200
whose thickness does not exceed 4.75 mm or more, but is not more than 10 mm
72.08.5300
whose thickness is 3 mm or more but less than 4.75 mm
72.08.5400
whose thickness is less than 3 mm
72.08.9000
Other
72.09.0000
Flat- Rolled products of non- Alloy iron or steel, whose width is 600 mm. or more, cold- Rolled, (cold reduced), not clad, not coated and not covered
Show details
72.09.1000
in coils, not further worked than by cold- Rolling (cold reduced)
72.09.1500
3 mm in thickness or more
72.09.1600
whose thickness does not exceed 1 mm and is less than 3 mm
72.09.1700
0.5 mm thick or more but less than 1 mm
72.09.1800
whose thickness is less than 0.5 mm
72.09.2000
not in coils, not worked further than cold- Rolling (cold- Reduced)
72.09.2500
whose thickness does not exceed 3 mm
72.09.2600
whose thickness is more than 1 mm but less than 3 mm
72.09.2700
whose thickness is 0.5 mm or more but less than 1 mm
72.09.2800
whose thickness is less than 0.5 mm
72.09.9000
Other
72.10.0000
Flat- Rolled non- Alloy iron or steel products, whose width is 600 mm or more, clad, plated or coated
Show details
72.10.1000
plated or coated with Tin
72.10.1100
whose thickness is .5 mm or more
72.10.1200
whose thickness is less than .5 mm
72.10.2000
plated or coated with lead, including terne- Plate
72.10.3000
plated or coated, electrolytically plated with zinc
72.10.3010
corrugated
72.10.3090
Other
72.10.4000
plated or coated in Another way, with zinc
72.10.4100
corrugated
72.10.4900
Other
72.10.5000
plated or coated with chromium oxides or with chromium and chromium oxides
72.10.6000
plated or coated with aluminium
72.10.6100
plated or coated with an Alloy of aluminium- zinc
72.10.6900
Other
72.10.7000
painted, coated with varnish or covered with plastic
72.10.9000
Other
72.11.0000
Flat- Rolled products from non- Alloy iron or steel, whose width does not exceed 600 mm, not clad, plated or covered
Show details
72.11.1000
not worked further than hot- Rolling
72.11.1300
Rolled in four face areas or in a channel of a closed box, whose width does not exceed 150 mm and whose thickness is not less than 4 mm, which are not in coils and without patterns in relief
72.11.1400
Other, whose thickness is 4.75 mm or more
72.11.1900
Other
72.11.2000
which have not been worked further than cold- Rolling (cold- Reduced)
72.11.2300
containing, by weight, less than 0.25% carbon
72.11.2900
Other
72.11.9000
Other
72.12.0000
Flat- Rolled products of non- Alloy iron or steel whose width is less than 600 mm, clad, plated or coated
Show details
72.12.1000
plated or coated with Tin
72.12.2000
plated or coated electrolytically with zinc
72.12.3000
plated or coated in Another way, with zinc
72.12.4000
painted, coated with varnish or covered with plastic
72.12.5000
painted or coated in Another way
72.12.6000
clad
72.13.0000
Bars and rods, hot- Rolled, in irregularly wound coils of iron or non- Alloy steel
Show details
72.13.1000
containing indentations, ribs, grooves or Other deformations As a result of the Rolling process
72.13.2000
Other, from free- Cutting steel
72.13.2010
the width of whose cross- Section exceeds 2,500 sq.cm
72.13.2040
which contain more than 0.30/100 carbon
72.13.2090
Other
72.13.2091
whose cross- Section is wider than 5 sq.cm
72.13.2092
whose diameter is less than 8 mm
72.13.2093
having a rectangular cross- Section, whose width is 2.5 times more than the thickness or more
72.13.2094
square rods, the length of each of the sides of their cross- Section is more than 25 mm
72.13.2099
Other
72.13.9000
Other
72.13.9100
with a circular cross- Section, whose diameter is less than 14 mm
72.13.9110
containing, by weight, 0.60/100 or more carbon
72.13.9130
Other, whose diameter is less than 8 mm
72.13.9190
Other
72.13.9900
Other
72.13.9910
containing, by weight, 0.60/100 or more carbon
72.13.9920
Other, the width of whose cross- Section is more than 2500 sq.mm
72.13.9940
Other, having a rectangular cross- Section, whose width is 2.5 times more than the thickness
72.13.9950
Other, square rods, the length of each of the sides of the cross- Section being more than 25 mm
72.13.9960
Other, the area of whose cross- Section is more than 5 sq.cm
72.13.9990
Other
72.14.0000
Other non- Alloy iron or steel rods, who have not been worked further than forging, hot- Rolling, pulling or hot- Forging, but including those which have been twisted after rolling
Show details
72.14.1000
forged
72.14.1010
the width of whose cross- Section is more than 2.500 sq.mm
72.14.1020
whose diameter is less than 8 mm
72.14.1021
From steel containing 0.6% or more of carbon by weight
72.14.1029
Other
72.14.1090
Other
72.14.1091
with a rectangular cross- Section, whose width is 2.5 times or more than the thickness
72.14.1092
square rods, the length of each of the sides of the cross- Section being more than 25 mm
72.14.1093
the area of whose cross- Section is more than 5 sq.cm
72.14.1099
Other
72.14.2000
including indentations, ribs, grooves or Other deformations created by the Rolling process or which were twisted after Rolling
72.14.3000
Other, from free- Cutting steel
72.14.3010
the cross- Section of whose surface is more than 2.500 sq.mm
72.14.3040
whose carbon content is more than 0.30/100
72.14.3041
having a square cross- Section, the length of each side being more than 25 mm
72.14.3042
whose carbon content is more than 0.60/100
72.14.3043
having a rectangular cross- Section, the width of which is 2.5 times more than its thickness
72.14.3044
the width of whose cross- Section is more than 5 sq. cm
72.14.3045
Other, whose diameter is more than 8 mm
72.14.3049
Other
72.14.3050
Other, whose diameter is less than 8 mm
72.14.3051
From steel containing 0.6% or more of carbon by weight
72.14.3059
Other
72.14.3090
Other
72.14.3091
the width of whose cross- Section is more than 5 sq.cm
72.14.3092
whose diameter is less than 8 mm
72.14.3093
with a rectangular cross- Section whose width is 2.5 times or more than its thickness
72.14.3094
square rods, the length of each of the sides of their cross- Section being more than 25 mm
72.14.3099
Other
72.14.9000
Other
72.14.9100
with a rectangular cross- section (not including squared)
72.14.9110
rolled , containing, by weight, 0.6% or more carbon
72.14.9120
Other, the width of whose cross- Section is more than 2500 sq.mm
72.14.9190
Other
72.14.9191
with the width of the cross- Section being 2.5 or more times the thickness
72.14.9192
the area of whose cross- Section is more than 5 sq.cm
72.14.9199
Other
72.14.9900
Other
72.14.9910
rolled, containing, by weight, 0.6% or more carbon
72.14.9920
not rolled, whose diameter is less than 8 mm
72.14.9930
Other, the area of whose cross- Section is more than 2500 sq.cm
72.14.9990
Other
72.14.9991
whose diameter is less than 8 mm
72.14.9992
square rods, the length of each the sides of the cross- Section being more than 25 mm
72.14.9993
the area of whose cross- Section is more than 5 sq.cm
72.14.9999
Other
72.15.0000
Other bars and rods of iron or non- Alloy steel
Show details
72.15.1000
from free- Cutting steel not worked more than cold- manufacturing or cold- finishing
72.15.1010
Dike product, cold- Finished, Whose surfaces are smooth and shiny
72.15.1011
whose carbon content is not more than 0..45/100 and with a circular or hexametrical cross- Section, the diameter of whose circle is from 4 to 101.6 mm, or the distance between two parallel sides of the hexametrical (across flats) is 6.35 to 50.8 mm
72.15.1019
Other
72.15.1020
whose cross- Section is more than 2,500 sq.mm
72.15.1030
Rods with projections or depressions (such As protuberances, ribs, indentations, dents) whether they have been worked in the twisting process or not
72.15.1040
rolled, whose carbon content is more than 0.30%
72.15.1041
with a square cross- Section, the length of each of its sides being more than 25 mm
72.15.1042
whose carbon content, by weight, is 0.60% or more
72.15.1045
with a rectangular cross- Section, whose width is more than 2.5 times its thickness
72.15.1046
the area of whose cross- Section is more than 5 sq,cm
72.15.1047
Other, whose diameter is more than 8 mm
72.15.1049
Other
72.15.1050
Other whose diameter is less than 8 mm
72.15.1051
from steel containing, by weight, 0.60% or more carbon
72.15.1059
Other
72.15.1090
Other
72.15.1091
with a rectangular cross- Section, whose width is more than 2.5 times its thickness
72.15.1092
square rods, the length of each of the sides of their cross- Section being more than 25 mm
72.15.1093
the surface of whose cross- Section is more than 5 sq.cm
72.15.1099
Other
72.15.5000
Other, which were not worked further than cold shaping or cold- finishing
72.15.5010
Dike product, cold- Finished, Whose surfaces are smooth and shiny
72.15.5011
whose carbon content is not more than 0.45/100 and with a circular or hexametrical cross- Section , the diameter of whose circle is 4 to 101.6 mm, or the distance between two parallel sides of the hexametrical (across flats) is from 6.35 to 50.8 mm
72.15.5019
Other
72.15.5020
the surface of whose cross- Section is more than 2,500 sq.mm
72.15.5030
Rods with projections or depressions (such As protuberances, ribs, indentations, dents), if they have been worked in the twisting process or not
72.15.5040
Other
72.15.5041
whose diameter is less than 8 mm
72.15.5042
having a rectangular cross- Section, whose width is 2.5 times or more than its thickness
72.15.5043
square rods, the length of the sides of their cross- Section being more than 25 mm
72.15.5044
the area of whose cross- Section is more than 5 sq.mm
72.15.5049
Other
72.15.5050
Other, Rolled
72.15.5051
having a square cross- Section, the length of each of its sides being more than 25 mm
72.15.5052
not in cylinders, having a rectangular cross- Section, whose width is 2.5 times more than its thickness
72.15.5053
whose cross- Section is more than 5 sq.cm
72.15.5054
Other whose diameter is more than 8 mm
72.15.5059
Other
72.15.5060
Other, whose diameter is less than 8 mm
72.15.5090
Other
72.15.5091
having a rectangular cross- Section, whose width is 2.5 times or more than its thickness
72.15.5092
square rods, the length of each of the sides of its cross- Section being more than 25 mm
72.15.5093
whose cross- Section is more than 5 sq.cm
72.15.5099
Other
72.15.9000
Other
72.15.9010
Dike product, cold- Finished, Whose surfaces are smooth and shiny
72.15.9011
whose carbon content is less than 0.45/100 and having a circular or hexametrical cross- Section, the diameter of whose circle is from 4 to 101.6 mm, or the distance between two parallel sides of the hexametrical (across flats) is 6.35 to 50.8 mm
72.15.9019
Other
72.15.9020
the area of whose cross- Section is more than 2,500 sq.mm
72.15.9030
Rods with projections or depressions (such As protuberances, ribs, indentations, grooves) if they have been worked in the twisting process or not
72.15.9040
Other, rolled, whose carbon content is less than 0.30%
72.15.9041
with a square cross- Section, the length of each of the sides being more than 25 mm
72.15.9042
whose carbon content, by weight, is 0.60% or more
72.15.9045
having a rectangular cross- Section, whose width is 2.5 times or more than its thickness
72.15.9046
the area of whose cross- Section is more than 5 sq.cm
72.15.9047
Other, whose diameter is more than 8 mm
72.15.9049
Other
72.15.9050
Other, whose diameter is less than 8 mm
72.15.9051
from steel containing, by weight, 0.60% or more carbon
72.15.9059
Other
72.15.9090
Other
72.15.9091
having a rectangular cross- Section, whose width is 2.5 times or more than its thickness
72.15.9092
square rods, the length of each of the sides of their cross- Section being more than 25 mm
72.15.9093
the area of whose cross- Section is more than 5 sq.cm
72.15.9099
Other
72.16.0000
Sections from iron or non- Alloy steel
Show details
72.16.1000
sections I, U or H, not worked further than hot- Rolling, hot- Drawn or hot extrusion of a height less than 80 mm
72.16.2000
having T or L sections, which were not worked more than hot- Rolling, hot- Drawn or hot- Extrusion, of a height less than 80 mm
72.16.2100
section L
72.16.2200
section T
72.16.3000
sections U, I or H, which were not worked more than hot- Rolling, hot- Drawn or hot extrusion, whose height is 80 mm or more
72.16.3100
section U
72.16.3200
section I
72.16.3300
section H
72.16.4000
sections L or T, which were not worked more than hot- Rolling, hot- Drawn or hot extrusion, whose height is 80 mm or more
72.16.5000
Other sections, which were not worked more than hot- Rolling, hot- Drawn or hot extrusion
72.16.6000
sections which were not worked more than cold- Forming or cold- finishing
72.16.6100
obtained by Flat- Rolled products
72.16.6900
Other
72.16.9000
Other
72.16.9100
cold- formed, or cold- Finished from Flat- Rolled products
72.16.9900
Other
72.17.0000
Iron wire or non- Alloy steel
Show details
72.17.1000
not plated or coated, whether with polishing or not
72.17.1010
containing, by weight, 0.6% or more carbon
72.17.1090
Other
72.17.1091
having a round section whose diameter is not more than 0.6 mm
72.17.1092
not having a round section
72.17.1093
Other, concerning which the CEO of the MINISTRY of Industry and Commerce has certified That it does not belong to the kind produced in Israel
72.17.1099
Other
72.17.2000
plated or coated with zinc
72.17.2010
containing, by weight, 0.6% or more carbon
72.17.2090
Other
72.17.2091
having a round section whose diameter is not more than 0.6 mm
72.17.2092
which does not have a round section
72.17.2093
Other, concerning which the CEO of the MINISTRY of Industry and Commerce certified That it is used in the manufacture of nets which are not welded and not soldered in an industrial factory or is not of a kind produced in Israel
72.17.2099
Other
72.17.3000
plated or coated with Other base metals
72.17.3010
containing, by weight, 0.6% or more carbon
72.17.3090
Other
72.17.9000
Other
72.17.9010
containing, by weight, 0.6% or more carbon
72.17.9090
Other
72.17.9091
having a round cross- Section whose diameter is not more than 0.6 mm
72.17.9092
not having a round cross- section
72.17.9093
Other, concerning which the CEO of the MINISTRY of Industry and Commerce has certified That it does not belong to the kind produced in Israel
72.17.9099
Other
72.18.0000
Stainless steel wire in ingots or other primary forms; semi- Finished products of stainless steel
Show details
72.18.1000
ingots and Other primary forms
72.18.9000
Other
72.18.9100
having a rectangular cross- section (Other than squared)
72.18.9900
Other
72.19.0000
Flat- Rolled products of stainless steel, whose width is 600 mm or more
Show details
72.19.1000
in coils which were not worked further than hot- Rolling
72.19.1100
whose thickness is more than 10 mm
72.19.1200
whose thickness is 4.75 mm or more, but is not more than 10 mm
72.19.1300
whose thickness is 3 mm or more but less than 4.75 mm
72.19.1400
whose thickness is less than 3 mm
72.19.2000
which are not in coils, and have not been worked further than hot- Rolling
72.19.2100
whose thickness is more than 10 mm
72.19.2200
whose thickness is 4.75 mm or more, but not more than 10 mm
72.19.2300
whose thickness is 3 mm or more but less than 4.75 mm
72.19.2400
whose thickness is less than 3 mm
72.19.3000
which were not worked further than cold- Rolling (cold- Reducing)
72.19.3100
whose thickness is 4.75 mm or more
72.19.3200
whose thickness is 3 mm or more, but less than 4.75 mm
72.19.3300
whose thickness is more than 1 mm but less than 3 mm
72.19.3400
whose thickness is 0.5 mm or more but less than 1 mm
72.19.3500
whose thickness is less than 0.5 mm
72.19.9000
Other
72.20.0000
Flat- Rolled products of stainless steel, of a width of less than 600 mm
Show details
72.20.1000
not worked further than hot- Rolling
72.20.1100
whose thickness is 4.75 mm or more
72.20.1200
whose thickness is less than 4.75
72.20.2000
which were not worked further than cold- Rolling (cold- Reducing)
72.20.9000
Other