HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 39
3901
POLYMERS OF ETHYLENE, IN PRIMARY FORMS
Show details
3901.10.01
Polyethylene having a specific gravity of less than 0.94, except as understood in section 3901.10.02
3901.10.02
Linear low density polyethylene (LLDPE)
3901.20.01
Polyethylene having a specific gravity of 0.94 or more
3901.30.01
Ethylene-Vinyl acetate copolymers
3901.90
Other
3901.90.01
Ethylene-maleic copolymer
3901.90.02
Polyethylene, chlorated or chlorosulfonated not charged nor modified, or pigmented
3901.90.03
Ethylene and acrylic acid copolymers, or metacrylic
3901.90.99
Other
3902
POLYMERS OF PROPYLENE OR OF OTHER OLEFINS, IN PRIMARY FORMS
Show details
3902.10
Polypropylene
3902.10.01
Not black smoke added
3902.10.99
Other
3902.20
Polyisobutylene
3902.20.01
Polyisobuthylene, not pigments nor charges or modifier added
3902.20.99
Other
3902.30
propylene copolymers
3902.30.01
Propylene copolymers, not black smoke added
3902.30.99
Other
3902.90
Other
3902.90.01
Terpolymer of metacrylate of methyl- butadiene- styrene
3902.90.99
Other
3903
POLYMERS OF STYRENE, IN PRIMARY FORMS
Show details
3903.11.01
Expansible
3903.19
Other
3903.19.01
Homopolymer of alpha methylestirene
3903.19.02
Crystal polyestirene
3903.19.99
Other
3903.20.01
Styrene-Acrylonitrile (SAN) copolymers
3903.30.01
Acrylonitrile-butadiene-Styrene (ABS) copolymers
3903.90
Other
3903.90.01
Styrene-vinyl copolymers
3903.90.02
Styrene-maleic copolymers
3903.90.03
Chloromethyl of styrene-divinyl- benzene copolymer
3903.90.04
Thermoplastic elastomeric copolymers
3903.90.05
Styrene copolymers, other than those of the subheadings 3903.90.01 through 04
3903.90.99
Other
3904
POLYMERS OF VINYL CHLORIDE OR OF OTHER HALOGENATED OLEFINS, IN PRIMARY FORMS
Show details
3904.10
poly(Vinyl chloride), not mixed with any Other substances
3904.10.01
Polyvinyl chloride (P.V.C.) obtained by the polymerization process in emulsion that, in dispersion (50% resin and 50% dioctilphtalate) will have a fine level of 7 Hegman as minimum
3904.10.02
Polyvinyl chloride (P.V.C.) obtained by the polymerization process in emulsion, with a particle size of 30 micras, and sinterized in a leaf of 0.65 mm of width, moisturized in a second (in electrolyte of 1.280 of specific gravity) with a pore size from 4
3904.10.03
P.V.C. obtained from mass polymerization processes
3904.10.04
P.V.C. obtained from emulsion or dispersion polymerization processes, other than those described by the subheadings 3904.10.01 and 3904.10.02
3904.10.99
Other
3904.21
Non-plasticised
3904.21.01
Polyvinyl chloride in aqueous dispersions, with viscosities of less than 200 centipoises
3904.21.02
Chlorated polyvinyl chloride, containing a minimum of 64% or chloride, whether or not having additives for molding
3904.21.99
Other
3904.22.01
Plasticized
3904.30
Vinyl chloride-Vinyl acetate copolymers
3904.30.01
Vinyl and vinyl acetate copolymer, with no charges nor modifiers, with a dissolution time at 25o C. in a solution of one part of copolymer, and 4 parts of methyl-ethylcetone, will be less than 30 minutes
3904.30.99
Other
3904.40
Other Vinyl chloride copolymers
3904.40.01
Vinyl-vinyl isobutyl ether copolymers
3904.40.99
Other
3904.50.01
Vinylidene chloride polymers
3904.61.01
Polytetrafluoroethylene
3904.69.99
Other
3904.90.99
Other
3905
POLYMERS OF VINYL ACETATE OR OF OTHER VINYL ESTERS, IN PRIMARY FORMS; OTHER VINYL POLYMERS IN PRIMARY FORMS
Show details
3905.12.01
in aqueous dispersion
3905.19
Other
3905.19.01
Emulsions and solutions based on polyacetate vinyl, other than those of subheadings 3905.19.02 and 03
3905.19.02
Polyacetate of thermoplastic vinyl resin, food level, with a molecular weight of 30,000 as maximum and a softening point of 90o C.as maximum
3905.19.03
Polyacetate of vinyl, thermoplastic resin, with molecular weight above m 30,000 and a softening point above 90o C
3905.19.99
Other
3905.21.01
in aqueous dispersion
3905.29
Other
3905.29.01
Emulsions and solutions based on polyacetate- vinyl copolymers, other than those of the subheadings 3905.19.02
3905.29.02
Copolymer of vinyl acetate or vinyl- pirrolidine
3905.29.99
Other
3905.30.01
poly(Vinyl Alcohol), whether or not containing unhydrolysed acetate groups
3905.91.01
copolymers
3905.99
Other
3905.99.01
Polyvinylpirrolidone
3905.99.02
Polyvinyl butirale
3905.99.99
Other
3906
ACRYLIC POLYMERS IN PRIMARY FORMS
Show details
3906.10
poly(methyl methacrylate)
3906.10.01
Metacrylate of methyl and acrylate of ethyl copolymers, in powder
3906.10.99
Other
3906.90
Other
3906.90.01
Polyacrilate of sodium at 12% in aqueous solution
3906.90.02
Hydroxilated acrylic resins, its copolymers and terpolymers
3906.90.03
Polyacrilates
3906.90.04
Polyacrylonitrile, not pigmented
3906.90.05
Polyester n-butylic of the acrylic acid
3906.90.06
Ethylene-terpolymer acrylic-ester acid of the acrylic acid
3906.90.07
Acrylamide copolymer and metacriloil oxyethyl trimethyl ammonium chloride
3906.90.08
Polyacrilate of sodium in powder, with a granule meter from 90 to 850 microns and minimum absorption of 200 milliliters per g
3906.90.09
Powdered ethyl metacrilate copolymer
3906.90.10
Poly(sodium metacrilate)
3906.90.99
Other
3907
POLYACETALS, OTHER POLYETHERS AND EPOXIDE RESINS, IN PRIMARY FORMS; POLYCARBONATES, ALKYD RESINS, POLYALLYL ESTERS AND OTHER POLYESTERS, IN PRIMARY FORMS
Show details
3907.10
Polyacetals
3907.10.01
Polyoximethylene, whether or not pigmented and charges added and modifiers, (pellets)
3907.10.02
Polyoxymethylene, in powder
3907.10.03
Trioxeno copolymers with cyclic esthers, whether or not pigmented and with charges and modifiers added (pellets)
3907.10.04
Trioxeno copolymers with cyclic esthers, not pigmented nor with charges and modifiers added
3907.10.99
Other
3907.20
Other polyethers
3907.20.01
Poly(dichloride of oxyethylene- (dimethylammonium)- ethylene- (dimethylammonium)-ethylene), in aqueous solution
3907.20.02
Resin of the polioxide of the 2,6-dimethylphenylene on powder, not charged, reforced, pigmented, stabilized or demoded (polyoxide of phenylene)
3907.20.03
Resins of polyether modified, with oxazoline function or uretane- amine or uretane- polyolephinas, soluble in water after been neutralized with weak organic acids
3907.20.04
Polyetramethylene ether glycol
3907.20.05
Resins of poly(2,2- bis(3,4-dicarboxyphenoxy)) phenyl propanol-2-phenylene bis imide
3907.20.06
Polyoxy ethylene or propylene glycol
3907.20.07
Polyoxypropylenethyleneglycol, with a molecular weight not exceeding 8,000
3907.20.99
Other
3907.30
Epoxide resins
3907.30.01
Epoxide resins, other than those of the subheading 3907.30.02
3907.30.02
Epoxide,etoxyline cycloalyphatic or novolacquer resins
3907.30.99
Other
3907.40
Polycarbonates
3907.40.01
Resins based on polycarbons, in fluid or paste form, including the emulsions, dispersions and solutions
3907.40.02
Resin resulting from carbon of diphenyl and 2,2-bis(4- hydroxyphenyl)propane, with charges added, supporters, desmoldiers, pigments, modifiers, stabilizers or other additives, in granules
3907.40.03
Resins based on polycarbons (50%) and polybuthyleneterephtalate (50%), mixed in alloy and/or with other thermoplastic polyesthers, (20%), whether or not charged, supported, pigmented, additive or modified in granules
3907.40.99
Other
3907.50
Alkyd resins
3907.50.01
Alkyl resins, not pigmented, in fluid or paste form, including the emulsions, dispersions and solutions
3907.50.02
Alkyl resins, modified with urethanes
3907.50.99
Other
3907.60
poly(Ethylene terephthalate)
3907.60.01
Polyterephtalate resins of ethylene solubles in chloride of methylene
3907.60.99
Other
3907.70.01
Poly(lactico acid)
3907.91
Unsaturated
3907.91.01
Thermoplastic elastomer based on copolymers of the polyesther-ether in alloy with polybutyleneterephtalate, whether or not containing charges, supporters, pigments, additives and modifiers in granules
3907.91.99
Other
3907.99
Other
3907.99.01
Polyesther of the adipic acid
3907.99.02
Polypropyleneglycol
3907.99.03
Polyhydantoines
3907.99.04
Prepolymer obtained from the 4-4- diisocianate diphenylmetane and polypropyleneglycol
3907.99.05
Polybutylene terephtalate
3907.99.06
Resins of polyesther with oxireno function
3907.99.07
Resin polyesther derived of the adipic acid and glycol
3907.99.08
Resin for catodic polyesther-epoxiaminade electrodeposit, with a content from 60 to 80% of solids
3907.99.09
Polyesther resin based on acid for- hydroxybenzoic, terephtalic acid and p- dihydroxybiphenyl, with additives, supporters and catalizers
3907.99.10
Polyesthers of the acid terephtalic - isophtalic acid - butanodiol - polyethyleneglycol, other than those of the subheading 3907.99.13
3907.99.11
Resin of the carbanilic acid
3907.99.99
Other
3908
POLYAMIDES IN PRIMARY FORMS
Show details
3908.10
Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12
3908.10.01
Polymers of the hexamethylenediamine and dodecandioic acid
3908.10.03
Superpolyamide of the 11- aminoundecanoic acid
3908.10.04
Polymers of the caprolactamm not pigmented, nor containing colorant materials
3908.10.05
Polyamides or superpolyamides, other than those of the subheadings 3908.10.01 through 04
3908.10.06
Polyamide 12
3908.10.07
Polyamide of hexamethylenediamine adipate with fillers, pigments and modifiers
3908.10.08
Polyamide of hexamethylenediamine adipate without fillers, pigments and modifiers
3908.90
Other
3908.90.01
Poyi(epsilon- caprolactom), in fluid or paste form, including the emulsions, dispersions and solutions
3908.90.02
Terpolyamides with a content in weight from 20 to 60% of the lactam of the dodecandioic acid or of the dodelactam and undecanoic acid, from 10 to 50% of adipate of hexamethylenediamine and from 10 to 45% of caprolactam
3908.90.03
Synthetic polyamide resine MXD6
3908.90.99
Other
3909
AMINO-RESINS, PHENOLIC RESINS AND POLYURETHANES, IN PRIMARY FORMS
Show details
3909.10.01
Urea resins; thiourea resins
3909.20
Melamine resins
3909.20.01
Melamine formaldehyde, with no colorant materials, in fluid form including the emulsions, dispersions and solutions
3909.20.02
Melamine formaldehyde, whether or not pigmented, other than that with smoke black and in fluid or paste form, including the emulsions
3909.20.99
Other
3909.30
Other Amino-resins
3909.30.01
Aminoplastes in color solution
3909.30.99
Other
3909.40
Phenolic resins
3909.40.01
Resins of phenol- formaldehyde, modified with vinyl formal, with dissolvent and anticomburents
3909.40.02
Resins from the condensation of the phenol and its derivatives, with the formaldehyde, and/or paraformaldehydo, whether or not with modifiers added
3909.40.03
Resins of phenol- formaldehyde etherified, not modified
3909.40.04
Resin of the carbanilic acid
3909.40.99
Other
3909.50
Polyurethanes
3909.50.01
Polyurethanes, with no pigments, charges or modifiers in fluid or paste form, including the emulsions, dispersions and solutions
3909.50.02
Polyurethanes (rubber of the polyisocianate type), not pigmented nor aconditionated of charges or modifiers, other than those in fluid or paste form, including the emulsions, dispersions and solutions
3909.50.03
Prepolymers and polymers of diphenylmetandiisocianate and polymethylene polyphenyl isocianate not exceeding of 17% of free isocianate
3909.50.04
Prepolymers and polymers of diphenylmetane diisocianate and polymethylene polyphenyl isocianate with more than 17% of free isocianate
3909.50.05
Prepolimer obtained from diphenylmetan 4,4'-diisocianate and polypropylenglycol
3909.50.99
Other
3910
SILICONES IN PRIMARY FORMS
Show details
3910.00.01
Resins of silicone("potting compound") to be used in electronics
3910.00.02
Resins of methyl-phenyl- siloxane, whether or not pigmented
3910.00.03
Alfa, omega-Dihydroxy- dimethyl-polysiloxane, other than that of the subheading 3910.00.05
3910.00.04
Silicone rubber hot vulcanized
3910.00.05
Alfa-Omega-Dihydroxy-dimethyl siloxane with a viscosity of 50 centipoises or more, but not exceeding of 100 centipoises, and a chain size from 50 to 120 monometers, free of cyclics
3910.00.99
Other
3911
PETROLEUM RESINS, COUMARONE-INDENE RESINS, POLYTERPENES, POLYSULPHIDES, POLYSULPHONES AND OTHER PRODUCTS SPECIFIED IN NOTE 3 TO THIS CHAPTER, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS
Show details
3911.10.01
Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
3911.90
Other
3911.90.01
Resins from polycondensation of cetones and aldehydes, modified
3911.90.02
Maleic resins based on butadiene or polybutadiene modified with resolcarboxilic acid for terbutyl phenol, soluble at water with no pigment of the from 65 to 70%
3911.90.03
Resins of anacard modified
3911.90.04
Resins from the condensation of the furfuryll alcohol with the formaldehyde, with to without modifiers added
3911.90.05
Polyamide-epichlorhidrine resins
3911.90.06
Polyhidantoines
3911.90.99
Other
3912
CELLULOSE AND ITS CHEMICAL DERIVATIVES, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS
Show details
3912.11.01
Non-Plasticized
3912.12.01
Plasticized
3912.20
Cellulose Nitrates (including collodions)
3912.20.01
Nitrocellulose in blocks, flakes, particles, nor coherent mass, granulated, puffs or powder; with no plastifiers added, whether or not containing no more of 41% of alcohol
3912.20.99
Other
3912.31.01
Carboxymethylcellulose and its salts
3912.39
Other
3912.39.01
Methylcellulose, in fluid of paste form, including the emulsions, dispersions or solutions
3912.39.02
Ethylcellulose
3912.39.03
Methylcellulose, other than that in fluid or paste form, including the emulsions, dispersions or solutions
3912.39.04
Hydroxyethylcellulose or ethylhydroxyethylcelullose
3912.39.05
Hydroxypropyl-methylcellulose
3912.39.99
Other
3912.90
Other
3912.90.01
Powdered cellulose
3912.90.02
Foamy cellulose
3912.90.99
Other
3913
NATURAL POLYMERS (FOR EXAMPLE, ALGINIC ACID) AND MODIFIED NATURAL POLYMERS (FOR EXAMPLE, HARDENED PROTEINS, CHEMICAL DERIVATIVES OF NATURAL RUBBER), NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS
Show details
3913.10
Alginic acid, its salts and esters
3913.10.01
Alginic acid
3913.10.02
Alginate of sodium
3913.10.03
Alginate of potassium
3913.10.04
Alginate of propylene-glycol
3913.10.05
Alginates of magnesium, of ammonium and of calcium
3913.10.99
Other
3913.90
Other
3913.90.01
Not pigmented nor colored casein, in granules, puffs, flakes or powder
3913.90.02
Cellulosic sponges
3913.90.03
Polysacaride atoxic substitute of the plasma (Dextran) or Dextran 2,3- dihydroxypropyl-2- hydroxy-1,3- propanedil ether
3913.90.04
Sulfate of condroitine
3913.90.05
Product from the reaction of the fluid obtained from the shell of the nut of anacard and the formaldehyde
3913.90.06
Xantan gum
3913.90.07
Ferrous dextran
3913.90.08
Chlorated or fluorated rubber, not charges nor modified, not pigmented
3913.90.99
Other
3914
Ion-exchangers based on polymers of headings 39.01 to 39.13, in primary forms
Show details
3914.00.01
Ions interchargers , cationic type
3914.00.99
Other
3915
WASTE, PARINGS AND SCRAP, OF PLASTICS
Show details
3915.10.01
Of polymers Of Ethylene
3915.20.01
Of polymers Of Styrene
3915.30.01
Of polymers Of Vinyl chloride
3915.90
Of Other plastics
3915.90.01
Of manufactures of polymetacrilate of methyl
3915.90.02
Waste, parings and scrap of poly (ethylene terephthalate) (PET)
3915.90.99
Other
3916
Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface- worked but not otherwise worked, of plastics
Show details
3916.10
Of polymers Of Ethylene
3916.10.01
Of cellular polyethylene
3916.10.99
Other
3916.20
Of polymers Of Vinyl chloride
3916.20.01
Profile shapes, with metallic support
3916.20.02
Rods
3916.20.99
Other
3916.90
Of Other plastics
3916.90.01
Casein rods
3916.90.02
Cellulose monofilaments
3916.90.03
Of celluloid
3916.90.04
Polyvinyl acetate rods
3916.90.99
Other
3917
Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
Show details
3917.10
artificial guts (sausage casings) Of hardened Protein or Of cellulosic materials
3917.10.01
Of regenerated cellulose, with a length of more of 50 cm, impregnated of preservative solutions
3917.10.02
Of regenerated cellulose, other than that of the subheading 3917.10.01
3917.10.03
Regenerated cellulose tubes with prints indicating that they will be used to package food products
3917.10.04
Cellulose corrugated tubes, only if they are long corrugated
3917.10.99
Other
3917.21
Of polymers Of Ethylene
3917.21.01
Of polyethylene with a diameter not exceeding 640 mm (25 inches)
3917.21.02
Of polyethylene with a diameter exceeding 640 mm (25 inches)
3917.21.99
Other
3917.22
Of polymers Of propylene
3917.22.01
Polypropylene tubes, with a diameter not exceeding 640 mm (25 inches)
3917.22.02
Of polypropylene with a diameter exceeding 640 mm (25 inches)
3917.22.99
Other
3917.23
Of polymers Of Vinyl chloride
3917.23.01
Polychloride tubes, of the kind used exclusively to implant of veins or arteries
3917.23.02
Tubes of chloride of polyvinyl (P.V.C.) with a diameter not exceeding 640 mm (25 inches), to be used for work under conditions equal or below to the following: pressure of 22 Kg/cm2 (300 lbs/inches2) and temperature of 60o C (140o F)
3917.23.03
Tubes of polyvinyl chloride (P.V.C.) with a diameter exceeding 640 mm (25 inches)
3917.23.99
Other
3917.29
Of Other plastics
3917.29.01
Of acrylonitrieo- butadiene-styrene (A.B.S.), with more than 640 mm (25 inches) of diameter
3917.29.02
Of vulcanized fiber
3917.29.03
Of nylon, not exceeding of 640 mm (25 inches) of diameter
3917.29.04
Nylon tubes with more than 640 mm (25 inches) of diameter
3917.29.05
Hoses or tubes of plastic materials with COSTURA and printed undeletable characters for wrapping of packaging
3917.29.99
Other
3917.31.01
Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 Mpa
3917.32
Other, not reinforced or otherwise combined with Other materials, without fittings
3917.32.01
Tubes, of circular section, closed by one of the extremes, of the kind used exclusively for intrauterine dispositives
3917.32.02
Based on chloride of polivinylidene (P.V.D.C.), with printings indicating its use for sausage casing
3917.32.99
Other
3917.33
Other, not reinforced or otherwise combined with Other materials, with fittings
3917.33.01
Artificial plastic materials tubing, not exceeding of 20 mm of exterior diameter, with drippings integrated, for agricultural watering
3917.33.99
Other
3917.39.99
Other
3917.40.01
fittings
3918
FLOOR COVERINGS OF PLASTICS, WHETHER OR NOT SELF-ADHESIVE, IN ROLLS OR IN THE FORM OF TILES; WALL OR CEILING COVERINGS OF PLASTICS, AS DEFINED IN NOTE 9 TO THIS CHAPTER
Show details
3918.10
Of polymers Of Vinyl chloride
3918.10.01
Vinyl tiles, for floor covering
3918.10.99
Other
3918.90.99
Of Other plastics
3919
SELF-ADHESIVE PLATES, SHEETS, FILM, FOIL, TAPE, STRIP AND OTHER FLAT SHAPES, OF PLASTICS, WHETHER OR NOT IN ROLLS
Show details
3919.10.01
In rolls of a width not exceeding 20 cm
3919.90.99
Other
3920
Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Show details
3920.10
Of polymers Of Ethylene
3920.10.01
Bioriented polyethylene sheets
3920.10.02
Films of a width not exceeding 5 cm
3920.10.03
With undeletable printed characters of trademarks or similars, indicating its use as daily products packing
3920.10.04
Strips of a width not exceeding 5 cm
3920.10.99
Other
3920.20
Of polymers Of propylene
3920.20.01
Films of polypropylene oriented in one or two directions
3920.20.02
Films of polypropylene oriented in two directions, with a width not exceeding 0.012 mm
3920.20.03
Dielectric films of polypropylene oriented in two directions, whether or not metalized with a width not exceeding 0.025 mm, for use in capacitors
3920.20.04
Strips or tapes with a width not exceeding 5 cm
3920.20.99
Other
3920.30
Of polymers Of Styrene
3920.30.01
Strips or tapes with a width not exceeding 5 cm
3920.30.02
Films of polystyrene with no black smoke
3920.30.03
Film of polystyrene biaxial (in two directions) oriented, with a dielectric constant between 2.4 and 2.6 at a frequency not exceeding 10 MHz, with a density of 1.05 g/cm3 at 23o C. An ashes content less than 10 p.p.m
3920.30.99
Other
3920.43
Containing by weight not less than 6 % of plasticisers
3920.43.01
Sheets imitating knits or leather, including those with engravings
3920.43.02
PVC sheets
3920.43.99
Other
3920.49
Other
3920.49.01
Other
3920.49.02
Sheets imitating knits or leather, including those with engravings
3920.49.99
Other. (Editor's Note: The indicated code, correspondes to that published January 18, 2002 in the Diario Oficial de la Federacion)
3920.51.01
Of poly(methyl methacrylate)
3920.59
Other
3920.59.01
Polyacrylalic plates
3920.59.99
Other
3920.61.01
Of Polycarbonates
3920.62
Of poly(Ethylene terephthalate)
3920.62.01
Films, foils or strips of terephtalate of polyethylene ,except as included in item 3920.62.02
3920.62.02
Biaxially oriented polyester films in one or two directions
3920.62.99
Other
3920.63
Of Unsaturated polyesters
3920.63.01
Sheets with printed characters, like trademarks or other indicating its use as packing
3920.63.02
Strips with a thickness not exceeding 5 cm
3920.63.99
Other
3920.69.99
Of Other polyesters
3920.71.01
Of regenerated Cellulose
3920.73
Of Cellulose acetate
3920.73.01
Of acetate of cellulose, with a width not exceeding 10 cm
3920.73.99
Other
3920.79
Of Other Cellulose derivatives
3920.79.01
Of vulcanized fiber
3920.79.99
Other, (Of other derivatives of cellulose)
3920.91.01
Of poly(Vinyl butyral)
3920.92
Of polyamides
3920.92.01
Polyamides- bands with a thickness not exceeding 8 mm
3920.92.99
Other
3920.93.01
Of Amino-resins
3920.94.01
Of Phenolic resins
3920.99
Of Other plastics
3920.99.01
Polypropylene sheet two-directions oriented, coated with poly(vinyl acetate) and/or poly(vinyl chloride)
3920.99.99
Other (plastics)