HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Show details
7201.10.00.00.00
Unalloyed pig iron containing phosphorus exceeding 0.5 percent by weight
7201.20.00.00.00
Cast unwrought unalloyed with phosphorus content exceeding 0.5 percent by weight
7201.50.00.00.00
Alloy pig iron;spiegeleisen
7202
Ferro-alloys
Show details
7202.1
Ferro-manganese
7202.11.00.00.00
With a carbon content exceeding 2 percent by weight
7202.19.00.00.00
Others
7202.2
Ferro-silicon
7202.21.00.00.00
With a silicon content exceeding 55 percent by weight
7202.29.00.00.00
Others
7202.30.00.00.00
Ferro-silico-manganese
7202.4
Ferro-chromium
7202.41.00.00.00
With a carbon content greater than 4 percent by weight
7202.49.00.00.00
Others
7202.50.00.00.00
Ferro-silico-chromium
7202.60.00.00.00
Ferronickel
7202.70.00.00.00
Ferromolybdenum
7202.80.00.00.00
Ferrovolframio and ferro-silico-tungsten
7202.9
Other
7202.91.00.00.00
Ferrotitanium and ferro-silico-titanium
7202.92.00.00.00
Ferrovanadium
7202.93.00.00.00
Ferro-niobium
7202.99.00.00.00
The others
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
Show details
7203.10.00.00.00
Ferrous products obtained by direct reduction of iron ore
7203.90.00.00.00
Others
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
7204.10.00.00.00
Waste and scrap of cast iron
7204.2
Waste and scrap of alloy steel
7204.21.00.00.00
Stainless steel
7204.29.00.00.00
Others
7204.30.00.00.00
Waste and scrap of tinned iron or steel
7204.4
Other waste and scrap
7204.41.00.00.00
Turnings, shavings, chips, filings (ammonium hand, sawing, filing) and cuts stampings, even in packages
7204.49.00.00.00
Others
7204.50.00.00.00
Scrap ingots
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
Show details
7205.10.00.00.00
Granules
7205.2
Powders
7205.21.00.00.00
Of alloy steel
7205.29.00.00.00
Others
7206
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
Show details
7206.10.00.00.00
Ingots
7206.90.00.00.00
The others
7207
Semi-finished products of iron or non-alloy steel
Show details
7207.1
Containing by weight less than 0.25 % of carbon
7207.11.00.00.00
Of square or rectangular cross section, the width measuring less than twice the thickness
7207.12.00.00.00
Other, of rectangular cross section
7207.19.00.00.00
Others
7207.20.00.00.00
Containing not less than 0.25 percent carbon by weight
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Show details
7208.10.00.00.00
In coils, simply hot-rolled, with patterns in relief
7208.2
Other, in coils, not further worked than hot-rolled, pickled
7208.25.00.00.00
Greater than or equal to 4.75 mm
7208.26.00.00.00
Greater than or equal to 3 mm thickness but less than 4.75 mm
7208.27.00.00.00
Thick less than 3 mm
7208.3
Other, in coils, not further worked than hot-rolled
7208.36.00.00.00
Of a thickness exceeding 10 mm
7208.37.00.00.00
Greater than or equal to 4.75 mm and less than or equal to 10 mm thickness
7208.38.00.00.00
Greater than or equal to 3 mm thickness but less than 4.75 mm
7208.39.00.00.00
Thick less than 3 mm
7208.40.00.00.00
not in coils, hot-rolled, with patterns in relief
7208.5
Other, not in coils, not further worked than hot-rolled
7208.51.00.00.00
Of a thickness exceeding 10 mm
7208.52.00.00.00
Greater than or equal to 4.75 mm and less than or equal to 10 mm thickness
7208.53.00.00.00
Greater than or equal to 3 mm thickness but less than 4.75 mm
7208.54
Of a thickness of less than 3 mm
7208.54.10.00.00
Of an output not exceeding 990 mm wide, with greater than or equal to 0.42 percent carbon and not less than 0.60 percent manganese content, by weight
7208.54.90.00.00
Others
7208.90.00.00.00
Others
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
Show details
7209.1
In coils, not further worked than cold-rolled (cold-reduced)
7209.15.00.00.00
Greater than or equal to 3 mm thickness
7209.16.00.00.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.17.00.00.00
Greater than or equal to 0.5 mm but not exceeding 1 mm
7209.18.00.00.00
Thick less than 0.5 mm
7209.2
Not in coils, not further worked than cold-rolled (cold-reduced)
7209.25.00.00.00
Greater than or equal to 3 mm thickness
7209.26.00.00.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.27.00.00.00
Greater than or equal to 0.5 mm but not exceeding 1 mm
7209.28.00.00.00
Thick less than 0.5 mm
7209.90.00.00.00
Others
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
Show details
7210.1
Plated or coated with tin
7210.11.00.00.00
Greater than or equal to 0.5 mm thickness
7210.12.00.00.00
Thick less than 0.5 mm
7210.20.00.00.00
Leaded, including coated with an alloy of lead and tin
7210.30
Electrolytically plated or coated with zinc
7210.30.10.00.00
Ondulados
7210.30.20.00.00
Coated with fosfatizado materials
7210.30.9
Others
7210.30.91.00.00
In the sizes 20 to 30, inclusive
7210.30.99.00.00
The others
7210.4
Otherwise plated or coated with zinc
7210.41
Corrugated
7210.41.10.00.00
Of exceeding 0.16 mm but not exceeding 2 mm thickness
7210.41.90.00.00
Others
7210.49
Other
7210.49.10.00.00
Of exceeding 0.16 mm but not exceeding 2 mm thickness
7210.49.90.00.00
Others
7210.50.00.00.00
Coated with chromium oxides or chromium and chromium oxides
7210.6
Plated or coated with aluminium
7210.61
Plated or coated with aluminium-zinc alloys
7210.61.10.00
Thickness greater than or equal to 0.16 mm but less than or equal to 2 mm
7210.61.10.00.10
Only with a thickness greater than or equal to 0.16 mm but less than or equal to 2 mm
7210.61.10.00.90
Others
7210.61.90.00.00
Others
7210.69
Other
7210.69.10.00
Thickness greater than or equal to 0.16 mm but less than or equal to 2 mm
7210.69.10.00.10
Only with a thickness greater than or equal to 0.16 mm but less than or equal to 2 mm
7210.69.10.00.90
Others
7210.69.90.00.00
Others
7210.70
Painted, varnished or coated with plastics
7210.70.10.00
Wavy
7210.70.10.00.10
Only painted with enamel paint, thickness greater than or equal to 016 mm but less than or equal to 155 mm
7210.70.10.00.20
Only varnished with epoxyphenolic resins, smooth
7210.70.10.00.90
Others
7210.70.90.00.00
Others
7210.90
Other
7210.90.1
Ondulados
7210.90.11.00.00
Coated asphalt, even with embossed aluminum layers
7210.90.19.00.00
Others
7210.90.90.00.00
Others
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
Show details
7211.1
Not further worked than hot-rolled
7211.13.00.00.00
Rolled on four faces or in a closed box, exceeding 150 mm width and greater than or equal to 4 mm thick, not in coils and without patterns in relief
7211.14
Other, of a thickness of 4.75 mm or more
7211.14.10.00.00
With a content greater than or equal to 0.42 percent carbon and not less than 0.60 percent manganese by weight
7211.14.90.00.00
Others
7211.19
Other
7211.19.10.00.00
Coils, with greater than or equal to 0.42 percent carbon and not less than 0.60 percent manganese content, by weight
7211.19.90.00.00
Others
7211.2
Not further worked than cold-rolled (cold-reduced)
7211.23.00.00.00
With a carbon content below 0.25 percent by weight
7211.29.00.00.00
Others
7211.90.00.00.00
Others
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
Show details
7212.10.00.00.00
Tinned
7212.20
Electrolytically plated or coated with zinc
7212.20.10.00.00
Strapping or bands
7212.20.20.00.00
Flats
7212.20.30.00.00
Ondulados
7212.20.9
Others
7212.20.91.00.00
In sizes from 20 to 30, inclusive
7212.20.99.00.00
Others
7212.30
Otherwise plated or coated with zinc
7212.30.10.00.00
Strapping or bands
7212.30.20.00.00
Flats
7212.30.30.00.00
Other, wavy
7212.30.9
Others
7212.30.91.00.00
In sizes from 20 to 30, inclusive
7212.30.99.00
Others
7212.30.99.00.10
Only with a thickness greater than or equal to 016 mm but less than or equal to 155 mm
7212.30.99.00.90
Others
7212.40
Painted, varnished or coated with plastics
7212.40.10.00.00
Straps or straps
7212.40.20.00.00
Pletinas
7212.40.30.00
Other, corrugated
7212.40.30.00.10
Only with a thickness greater than or equal to 016 mm but less than or equal to 155 mm
7212.40.30.00.90
Others
7212.40.90.00.00
Others
7212.50
Otherwise plated or coated
7212.50.10.00.00
Straps or straps
7212.50.20.00.00
Pletinas
7212.50.3
Other, corrugated
7212.50.31.00.00
Clad with asphalt, whether or not with embossed aluminum layers
7212.50.39.00.00
Others
7212.50.4
Other aluminized
7212.50.41.00.00
In calibres from 20 to 30 inclusive
7212.50.49.00.00
Others
7212.50.90.00.00
Others
7212.60
Clad
7212.60.10.00.00
Straps or straps
7212.60.20.00.00
Pletinas
7212.60.30.00.00
Other, corrugated
7212.60.90.00.00
Others
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
Show details
7213.10.00.00.00
With notches, cords, grooves or reliefs, produced in the laminate
7213.20.00.00.00
Other, of steel of easy mechanization
7213.9
Other
7213.91
Of circular cross-section measuring less than 14 mm in diameter
7213.91.10.00.00
With a carbon content not exceeding 0,6 percent by weight
7213.91.90.00.00
Others
7213.99
Other
7213.99.10.00.00
With a carbon content not exceeding 0,6 percent by weight
7213.99.90.00.00
Others
7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Show details
7214.10.00.00.00
Forged
7214.20
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.20.10.00.00
Bars and rods, deformed (corrugated), to reinforce concrete (concrete)
7214.20.90.00.00
The others
7214.30
Other, of free-cutting steel
7214.30.20.00.00
Other, smooth, of circular or square cross-section
7214.30.90.00.00
The others
7214.9
Other
7214.91
Of rectangular (other than square) cross-section
7214.91.10.00.00
With a carbon content not exceeding 0,6 percent by weight and of which the greatest cross-sectional dimension exceeds 13 mm
7214.91.90.00.00
Other
7214.99
Other
7214.99.1
Other, containing by weight less than 0,25 percent of carbon
7214.99.11.00.00
Other, smooth, of circular or square cross-section
7214.99.19.00.00
The others
7214.99.2
Other, of a carbon content not exceeding 0.25 percent by weight but less than 0,6 percent
7214.99.21.00.00
Other, smooth, of circular or square cross-section
7214.99.29.00.00
The others
7214.99.90.00.00
The others
7215
Other bars and rods of iron or non-alloy steel
Show details
7215.10
Of free-cutting steel, not further worked than cold-formed or cold- finished
7215.10.20.00.00
Other bars and rods, tinned, plated or coated
7215.10.30.00.00
Other, of circular cross-section
7215.10.40.00.00
Other, of square cross-section
7215.10.90.00.00
The others
7215.50
Other, not further worked than cold-formed or cold-finished
7215.50.1
Of a carbon content less than 0,25 percent by weight
7215.50.12.00.00
Other bars and rods, tinned, plated or coated
7215.50.13.00.00
Other, of circular cross-section
7215.50.14.00.00
Other, of square cross-section
7215.50.19.00.00
The others
7215.50.2
Of a carbon content not exceeding 0,25 percent by weight but less than 0,6 percent
7215.50.22.00.00
Other bars and rods, tinned, plated or coated
7215.50.23.00.00
Other, of circular cross-section
7215.50.24.00.00
Other, of square cross-section
7215.50.29.00.00
Others
7215.50.3
Of a carbon content not exceeding 0,6 percent by weight
7215.50.32.00.00
Other bars and rods, tinned, plated or coated
7215.50.33.00.00
Other, of circular cross-section, calibrated
7215.50.34.00.00
Other, of circular cross-section, uncalibrated
7215.50.35.00.00
Other square shaped
7215.50.39.00.00
The others
7215.90
Other
7215.90.20.00.00
Other bars and rods, tinned, plated or coated
7215.90.3
Other, of circular cross-section
7215.90.31.00.00
Calibrated
7215.90.39.00.00
The others
7215.90.40.00.00
Other, of square cross-section
7215.90.90.00.00
The others
7216
Angles, shapes and sections of iron or non-alloy steel
Show details
7216.10
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.10.10.00.00
In U, of a thickness of 1,8 mm or more but not exceeding 6,4 mm and a height of more than 12 mm
7216.10.9
Others
7216.10.91.00.00
In I, of a height not exceeding 50 mm
7216.10.92.00.00
In H, of a height not exceeding 50 mm
7216.10.99.00.00
Others
7216.2
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21
L sections
7216.21.10.00.00
Of a thickness of 1,8 mm or more but not exceeding 6,4 mm and a height exceeding 12 mm
7216.21.90.00.00
Others
7216.22
T sections
7216.22.10.00.00
Of a height not exceeding 50 mm
7216.22.90.00.00
Others
7216.3
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more
7216.31
U sections
7216.31.10.00.00
Of a thickness of 1,8 mm or more but not exceeding 6,4 mm
7216.31.90.00.00
Others
7216.32.00.00.00
Profiles in I
7216.33.00.00.00
Profiles in H
7216.40.00.00.00
L or T sections, not further worked than hot-rolled or extruded, of a height of 80 mm or more
7216.50
Other angles, shapes and sections, not further worked than hot- rolled, hot-drawn or extruded
7216.50.10.00.00
L-shaped profiles (angled)
7216.50.20.00.00
Corrugated sheets for ceilings
7216.50.90.00.00
Others
7216.6
Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216.61
Obtained from flat-rolled products
7216.61.10.00.00
L-shaped profiles (in angle form)
7216.61.20.00.00
Corrugated sheets for ceilings
7216.61.30.00.00
C- and Z-shaped profiles (carriages for roof)
7216.61.90.00.00
Others
7216.69
Other
7216.69.10.00.00
L-shaped profiles (in angle form)
7216.69.90.00.00
Others
7216.9
Other
7216.91
Cold-formed or cold-finished from flat-rolled products
7216.91.1
Perforated
7216.91.11.00.00
L-shaped profiles (in angle form)
7216.91.19.00.00
Others
7216.99
Other
7216.99.10.00.00
L-shaped profiles (in angle form)
7216.99.20.00.00
Corrugated sheets for ceilings
7216.99.90.00.00
The others
7217
Wire of iron or non-alloy steel
Show details
7217.10
Not plated or coated, whether or not polished
7217.10.10.00.00
Of a carbon content less than 0,25 percent by weight
7217.10.20.00.00
Of a carbon content not exceeding 0,25 percent but less than 0,6 percent by weight
7217.10.3
Of a carbon content not exceeding 0,6 percent by weight
7217.10.31.00.00
To pretension
7217.10.39.00.00
Others
7217.20
Plated or coated with zinc
7217.20.1
Of a carbon content less than 0,25 percent by weight
7217.20.11.00.00
Of a circular cross-section, of a diameter of 0,22 mm or more but not exceeding 0,24 mm, with a zinc coating
7217.20.12.00.00
Electroplating (electroplating), with a diameter of 0,50 mm or more but less than 1,4 mm
7217.20.19.00.00
Others
7217.20.20.00.00
Of a carbon content not exceeding 0,25 percent but less than 0,6 percent by weight
7217.20.3
Of a carbon content not exceeding 0,6 percent by weight
7217.20.31.00.00
Of a circular cross-section, of a diameter of 0,8 mm or more but not exceeding 5,15 mm
7217.20.32.00.00
Of a rectangular cross-section, of a thickness of 0.35 mm or more but not exceeding 0,7 mm and a width of 0,5 mm or more but not exceeding 3 mm
7217.20.39.00.00
Others
7217.30
Plated or coated with other base metals
7217.30.10.00.00
Of a carbon content less than 0,25 percent by weight
7217.30.20.00.00
Of a carbon content not exceeding 0,25 percent but less than 0,6 percent by weight
7217.30.3
Of a carbon content not exceeding 0,6 percent by weight
7217.30.31.00.00
Copper Coated
7217.30.39.00.00
Others
7217.90.00.00.00
Others
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Show details
7218.10.00.00.00
Ingots or other primary forms
7218.9
Other
7218.91.00.00.00
Of rectangular cross-section
7218.99.00.00.00
Others
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
7219.1
Not further worked than hot-rolled, in coils
7219.11.00.00.00
Of a thickness exceeding 10 mm
7219.12.00.00.00
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219.13.00.00.00
Of a thickness of 3 mm or more but less than 4,75 mm
7219.14.00.00.00
Of a thickness of less than 3 mm
7219.2
Not further worked than hot-rolled, not in coils
7219.21.00.00.00
Of a thickness exceeding 10 mm
7219.22.00.00.00
Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219.23.00.00.00
Of a thickness of 3 mm or more but less than 4,75 mm
7219.24.00.00.00
Of a thickness of less than 3 mm
7219.3
Not further worked than cold-rolled (cold-reduced)
7219.31.00.00.00
Of a thickness of 4,75 mm or more
7219.32.00.00.00
Of a thickness of 3 mm or more but less than 4,75 mm
7219.33.00.00.00
Of a thickness exceeding 1 mm but less than 3 mm
7219.34.00.00.00
Of a thickness of 0,5 mm or more but not exceeding 1 mm
7219.35.00.00.00
Of a thickness of less than 0,5 mm
7219.90.00.00.00
Others
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
Show details
7220.1
Not further worked than hot-rolled
7220.11.00.00.00
Of a thickness of 4,75 mm or more
7220.12.00.00.00
Of a thickness of less than 4,75 mm
7220.20.00.00.00
Simply cold-rolled
7220.90
Other
7220.90.10.00.00
Strapping
7220.90.20.00.00
Flats
7220.90.90.00.00
Others