HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 72
72.01
Pig iron and spiegeleisen in pigs- blocks or other primary forms
Show details
72.01.1
Non-alloy pig iron containing by weight 0.5% or less of phosphorus
72.01.10.00.00.01
In rectangular blocks form
72.01.10.00.00.02
In square blocks form
72.01.10.00.00.03
In round blocks form
72.01.10.00.99.99
Other
72.01.2
Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
72.01.20.00.00.01
In rectangular blocks form
72.01.20.00.00.02
In square blocks form
72.01.20.00.00.03
In round blocks form
72.01.20.00.99.99
Other
72.01.50.00.00.00
Alloy pig iron; spiegeleisen
72.02
Ferro-alloys
Show details
72.02.1
Ferro-manganese
72.02.11.00.00.00
Containing by weight more than 2 % of carbon
72.02.19.00.00.00
Other
72.02.2
Ferro-silicon
72.02.21.00.00.00
Containing by weight more than 55 % of silicon
72.02.29.00.00.00
Other
72.02.30.00.00.00
Ferro-silico-manganese
72.02.4
Ferro-chromium
72.02.41.00.00.00
Containing by weight more than 4 % of carbon
72.02.49.00.00.00
Other
72.02.50.00.00.00
Ferro-silico-chromium
72.02.60.00.00.00
Ferro-nickel
72.02.70.00.00.00
Ferro-molybdenum
72.02.80.00.00.00
Ferro-tungsten and ferro-silico-tungsten
72.02.9
Other
72.02.91.00.00.00
Ferro-titanium and ferro-silico-titanium
72.02.92.00.00.00
Ferro-vanadium
72.02.93.00.00.00
Ferro-niobium
72.02.99.00.00.00
Other
72.03
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products- in lumps- pellets or similar forms; iron having a minimum purity by weight of 99.94 %- in lumps- pellets or similar forms
Show details
72.03.10.00.00.00
Ferrous products obtained by direct reduction of iron ore
72.03.90.00.00.00
Other
72.04
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Show details
72.04.10.00.00.00
Waste and scrap of cast iron
72.04.2
Waste and scrap of alloy steel
72.04.21.00.00.00
Of stainless steel
72.04.29.00.00.00
Other
72.04.30.00.00.00
Waste and scrap of tinned iron or steel
72.04.4
Other waste and scrap
72.04.41
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
72.04.41.00.00.01
Milling and Turning flakes
72.04.41.00.00.02
Milling and Turning Flinders
72.04.41.00.00.03
Milling and Turning waste
72.04.41.00.00.04
Mulch, filings and cuts of the stamping and cutting operations
72.04.49.00.00.00
Other
72.04.50.00.00.00
Remelting scrap ingots
72.05
Granules and powders- of pig iron- spiegeleisen- iron or steel
Show details
72.05.1
Granules
72.05.10.00.00.01
Of the cast iron
72.05.10.00.00.02
Of cast iron spiegel
72.05.10.00.00.03
Of iron
72.05.10.00.00.04
Of steel
72.05.2
Powders
72.05.21.00.00.00
Of alloy steel
72.05.29.00.00.00
Other
72.06
Iron and non-alloy steel in ingots or other primary forms excluding iron of heading 72.03
Show details
72.06.1
Ingots
72.06.10.00.00.01
Of iron
72.06.10.00.00.02
Of steel
72.06.90.00.00.00
Other
72.07
Semi-finished products of iron or non-alloy steel
Show details
72.07.1
Containing by weight less than 0.25 % of carbon
72.07.11
Of rectangular including square cross-section, the width measuring less than twice the thickness
72.07.11.00.00.01
Of iron
72.07.11.00.00.02
Of steel
72.07.12
Other, of rectangular other than square cross-section
72.07.12.00.00.01
Of iron
72.07.12.00.00.02
Of steel
72.07.19
Other
72.07.19.00.00.01
Of iron
72.07.19.00.00.02
Of steel
72.07.20.00.00.00
Containing by weight 0.25 % or more of carbon
72.08
Flat-rolled products of iron or non-alloy steel- of a width of 600 mm or more- hot-rolled- not clad- plated or coated
Show details
72.08.1
In coils, not further worked than hot-rolled, with patterns in relief
72.08.10.00.00.03
Of thikness less than 1.60 mm
72.08.10.00.00.04
Of thikness 1.60 mm to 8 mm
72.08.10.00.00.05
Of thikness more than 8 mm
72.08.2
Other- in coils- not further worked than hot-rolled- pickled
72.08.25
Of a thickness of 4.75 mm or more
72.08.25.00.00.03
Of thikness 4.75 mm to 6 mm
72.08.25.00.00.04
Of thikness more than 6 mm
72.08.26
Of a thickness of 3 mm or more but less than 4.75 mm
72.08.26.00.00.01
Of iron
72.08.26.00.00.02
Of steel
72.08.27
Of a thickness of less than 3 mm
72.08.27.00.00.03
Of thikness less than 1.50 mm
72.08.27.00.00.04
Of thikness 1.50 mm less than 3 mm
72.08.3
Other- in coils- not further worked than hot-rolled
72.08.36
Of a thickness exceeding 10 mm
72.08.36.00.00.03
Of thikness more than 10 mm to 17.5 mm
72.08.36.00.00.04
Of thikness more than 17.5 mm
72.08.37
Of a thickness of 4.75 mm or more but not exceeding 10 mm
72.08.37.00.00.01
Of iron
72.08.37.00.00.02
Of steel
72.08.38
Of a thickness of 3 mm or more but less than 4.75 mm
72.08.38.00.00.01
Of iron
72.08.38.00.00.02
Of steel
72.08.39
Of a thickness of less than 3 mm
72.08.39.00.00.03
Of thikness less than 1.50 mm
72.08.39.00.00.04
Of thikness 1.50 mm less than 3 mm
72.08.4
Not in coils, not further worked than hot-rolled, with patterns in relief
72.08.40.00.00.03
Of thikness less than 1.60 mm
72.08.40.00.00.04
Of thikness1.6 to 8 mm
72.08.40.00.00.05
Of thikness more than 8 mm
72.08.5
Other- not in coils- not further worked than hot-rolled
72.08.51
Of a thickness exceeding 10 mm
72.08.51.00.00.03
Of thikness more than 10 mm to 17.5 mm
72.08.51.00.00.04
Of thikness more than 17.5 mm
72.08.52
Of a thickness of 4.75 mm or more but not exceeding 10 mm
72.08.52.00.00.01
Of iron
72.08.52.00.00.02
Of steel
72.08.53
Of a thickness of 3 mm or more but less than 4.75 mm
72.08.53.00.00.01
Of iron
72.08.53.00.00.02
Of steel
72.08.54
Of a thickness of less than 3 mm
72.08.54.00.00.03
Of thikness less than 1.50 mm
72.08.54.00.00.04
Of thikness 1.50 mm less than 3 mm
72.08.90.00.00.00
Other
72.09
Flat-rolled products of iron or non-alloy steel- of a width of 600 mm or more- cold-rolled cold-reduced- not clad- plated or coated
Show details
72.09.1
In coils- not further worked than cold-rolled cold-reduced
72.09.15
Of a thickness of 3 mm or more
72.09.15.00.00.01
Of iron
72.09.15.00.00.02
Of steel
72.09.16
Of a thickness exceeding 1 mm but less than 3 mm
72.09.16.00.00.01
Of iron
72.09.16.00.00.02
Of steel
72.09.17
Of a thickness of 0.5 mm or more but not exceeding 1 mm
72.09.17.00.00.01
Of iron
72.09.17.00.00.02
Of steel
72.09.18
Of a thickness of less than 0.5 mm
72.09.18.00.00.01
Of iron
72.09.18.00.00.02
Of steel
72.09.2
Not in coils- not further worked than cold-rolled cold-reduced
72.09.25
Of a thickness of 3 mm or more
72.09.25.00.00.01
Of iron
72.09.25.00.00.02
Of steel
72.09.26
Of a thickness exceeding 1 mm but less than 3 mm
72.09.26.00.00.01
Of iron
72.09.26.00.00.02
Of steel
72.09.27
Of a thickness of 0.5 mm or more but not exceeding 1 mm
72.09.27.00.00.01
Of iron
72.09.27.00.00.02
Of steel
72.09.28
Of a thickness of less than 0.5 mm
72.09.28.00.00.01
Of iron
72.09.28.00.00.02
Of steel
72.09.90.00.00.00
Other
72.10
Flat-rolled products of iron or non-alloy steel- of a width of 600 mm or more- clad- plated or coated
Show details
72.10.1
Plated or coated with tin
72.10.11
Of a thickness of 0.5 mm or more
72.10.11.00.00.01
Of iron
72.10.11.00.00.02
Of steel
72.10.12
Of a thickness of less than 0.5 mm
72.10.12.00.00.01
Of iron
72.10.12.00.00.02
Of steel
72.10.2
Plated or coated with lead, including terne-plate
72.10.20.00.00.01
Painted or covered with plumbum
72.10.20.00.00.02
Painted with mixture of plumbum and tin
72.10.30.00.00.00
Electrolytically plated or coated with zinc
72.10.4
Otherwise plated or coated with zinc
72.10.41
Corrugated
72.10.41.00.00.01
Painted with Zinc
72.10.41.00.00.02
Covered with zinc
72.10.49.00.00.00
Other
72.10.5
Plated or coated with chromium oxides or with chromium and chromium oxides
72.10.50.00.00.01
Painted or covered with chromium oxide
72.10.50.00.00.02
Coated or covered with chromium with chromium oxides
72.10.6
Plated or coated with aluminium
72.10.61.00.00.00
Plated or coated with aluminium-zinc alloys
72.10.69.00.00.00
Other
72.10.7
Painted, varnished or coated with plastics
72.10.70.00.00.01
Printed
72.10.70.00.00.02
Varnished
72.10.70.00.00.03
Covered with plastics
72.10.90.00.00.00
Other
72.11
Flat-rolled products of iron or non-alloy steel- of a width of less than 600 mm- not clad- plated or coated
Show details
72.11.1
Not further worked than hot-rolled
72.11.13
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
72.11.13.00.00.01
Of iron
72.11.13.00.00.02
Of steel
72.11.14
Other, of a thickness of 4.75 mm or more
72.11.14.00.00.01
Of iron
72.11.14.00.00.02
Of steel
72.11.19.00.00.00
Other
72.11.2
Not further worked than cold-rolled cold-reduced
72.11.23
Containing by weight less than 0.25 % of carbon
72.11.23.00.00.01
Of iron
72.11.23.00.00.02
Of steel
72.11.29.00.00.00
Other
72.11.90.00.00.00
Other
72.12
Flat-rolled products of iron or non-alloy steel- of a width of less than 600 mm- clad- plated or coated
Show details
72.12.1
Plated or coated with tin
72.12.10.00.00.01
Painted
72.12.10.00.00.02
Covered
72.12.2
Electrolytically plated or coated with zinc
72.12.20.00.00.01
Painted
72.12.20.00.00.02
Covered
72.12.3
Otherwise plated or coated with zinc
72.12.30.00.00.01
Painted
72.12.30.00.00.02
Covered
72.12.4
Painted, varnished or coated with plastics
72.12.40.00.00.01
Printed
72.12.40.00.00.02
Varnished
72.12.40.00.00.03
Covered with plastics
72.12.5
Otherwise plated or coated
72.12.50.00.00.01
Painted
72.12.50.00.00.02
Covered
72.12.60.00.00.00
Clad
72.13
Bars and rods- hot-rolled- in irregularly wound coils- of iron or non-alloy steel
Show details
72.13.1
Containing indentations, ribs, grooves or other deformations produced during the rolling process
72.13.10.00.00.01
Of iron
72.13.10.00.00.02
Of steel
72.13.20.00.00.00
Other, of free-cutting steel
72.13.9
Other
72.13.91
Of circular cross-section measuring less than 14 mm in diameter
72.13.91.00.00.01
Of iron
72.13.91.00.00.02
Of steel
72.13.99.00.00.00
Other
72.14
Other bars and rods of iron or non-alloy steel- not further worked than forged- hot-rolled- hot-drawn or hot-extruded- but including those twisted after rolling
Show details
72.14.1
Forged
72.14.10.30.00.00
Of circular cross-section measuring less than 8mm in diameter
72.14.10.40.00.00
Of circular cross-section measuring 8-40 mm in diameter
72.14.10.90.00.00
Other
72.14.2
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
72.14.20.30.00.00
Of circular cross-section measuring less than 8mm in diameter
72.14.20.40.00.00
Of circular cross-section measuring 8-40 mm in diameter
72.14.20.90.00.00
Other
72.14.3
Other, of free-cutting steel
72.14.30.30.00.00
Of circular cross-section measuring less than 8mm in diameter
72.14.30.40.00.00
Of circular cross-section measuring 8-40 mm in diameter
72.14.30.90.00.00
Other
72.14.9
Other
72.14.91
Of rectangular other than square cross-section
72.14.91.00.00.01
Of iron
72.14.91.00.00.02
Of steel
72.14.99.00.00.00
Other
72.15
Other bars and rods of iron or non-alloy steel
Show details
72.15.1
Of free-cutting steel, not further worked than cold-formed or cold- finished
72.15.10.30.00.00
Of circular cross-section measuring less than 8mm in diameter
72.15.10.40.00.00
Of circular cross-section measuring 8-40 mm in diameter
72.15.10.90.00.00
Other
72.15.5
Other, not further worked than cold-formed or cold-finished
72.15.50.30.00.00
Of circular cross-section measuring less than 8mm in diameter
72.15.50.40.00.00
Of circular cross-section measuring 8-40 mm in diameter
72.15.50.90.00.00
Other
72.15.9
Other
72.15.90.30.00.00
Of circular cross-section measuring less than 8mm in diameter
72.15.90.40.00.00
Of circular cross-section measuring 8-40 mm in diameter
72.15.90.90.00.00
Other
72.16
Angles- shapes and sections of iron or non-alloy steel
Show details
72.16.1
U, I or H sections, not further worked than hot-rolled, hotdrawn or extruded, of a height of less than 80 mm
72.16.10.00.00.01
Pieces of iron in U-shaped
72.16.10.00.00.02
Pieces of steel in U-shaped
72.16.10.00.00.03
Pieces of iron in I-shaped
72.16.10.00.00.04
Pieces of steel in I-shaped
72.16.10.00.00.05
Pieces of iron in H-shaped
72.16.10.00.00.06
Pieces of steel in H-shaped
72.16.2
L or T sections- not further worked than hot-rolled- hot-drawn or extruded- of a height of less than 80 mm
72.16.21
L sections
72.16.21.00.00.01
Of iron
72.16.21.00.00.02
Of steel
72.16.22
T sections
72.16.22.00.00.01
Of iron
72.16.22.00.00.02
Of steel
72.16.3
U- I or H sections- not further worked than hot-rolled- hot-drawn or extruded of a height of 80 mm or more
72.16.31
U sections
72.16.31.1
Of a height of 80 mm or more, but not exceeding 220 mm
72.16.31.10.00.01
Of iron
72.16.31.10.00.02
Of steel
72.16.31.2
Of a height exceeding 220 mm
72.16.31.20.00.01
Of iron
72.16.31.20.00.02
Of steel
72.16.32
I sections
72.16.32.1
Of a height of 80 mm or more, but not exceeding 220 mm
72.16.32.10.00.01
Of iron
72.16.32.10.00.02
Of steel
72.16.32.2
Of a height exceeding 220 mm
72.16.32.20.00.01
Of iron
72.16.32.20.00.02
Of steel
72.16.33
H sections
72.16.33.1
Of a height of 80 mm or more, but not exceeding 220 mm
72.16.33.10.00.01
Of iron
72.16.33.10.00.02
Of steel
72.16.33.2
Of a height exceeding 220 mm
72.16.33.20.00.01
Of iron
72.16.33.20.00.02
Of steel
72.16.4
L or T sections- not further worked than hot-rolled- hot-drawn or extruded- of a height of 80 mm or more
72.16.40.1
Of a height of 80 mm or more, but not exceeding 220 mm
72.16.40.10.00.01
Pieces of iron in L-shaped
72.16.40.10.00.02
Pieces of steel in L-shaped
72.16.40.10.00.03
Pieces of iron in T-shaped
72.16.40.10.00.04
Pieces of steel in T-shaped
72.16.40.2
Of a height exceeding 220 mm
72.16.40.20.00.01
Pieces of iron in L-shaped
72.16.40.20.00.02
Pieces of steel in L-shaped
72.16.40.20.00.03
Pieces of iron in T-shaped
72.16.40.20.00.04
Pieces ofsteel in T-shaped
72.16.5
Other angles, shapes and sections, not further worked than hotrolled, hot-drawn or extruded
72.16.50.00.00.01
Of iron
72.16.50.00.00.02
Of steel
72.16.6
Angles- shapes and sections- not further worked than cold-formed or cold-finished
72.16.61
Obtained from flat-rolled products
72.16.61.00.00.01
Of iron
72.16.61.00.00.02
Of steel
72.16.69.00.00.00
Other
72.16.9
Other
72.16.91
Cold-formed or cold-finished from flat-rolled products
72.16.91.00.00.01
Of iron
72.16.91.00.00.02
Of steel
72.16.99.00.00.00
Other
72.17
Wire of iron or non-alloy steel
Show details
72.17.1
Not plated or coated, whether or not polished
72.17.10.00.00.01
Of iron
72.17.10.00.00.02
Of steel
72.17.2
Plated or coated with zinc
72.17.20.00.00.01
Of iron
72.17.20.00.00.02
Of steel
72.17.3
Plated or coated with other base metals
72.17.30.00.00.01
Of iron
72.17.30.00.00.02
Of steel
72.17.90.00.00.00
Other
72.18
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Show details
72.18.1
Ingots and other primary forms
72.18.10.00.00.01
Bullions Ingots
72.18.10.00.00.02
In other primary forms
72.18.9
Other
72.18.91.00.00.00
Of rectangular other than square cross-section
72.18.99
Other
72.18.99.00.00.01
With a round cross-section
72.18.99.00.00.02
With a square cross section
72.18.99.00.99.99
Other
72.19
Flat-rolled products of stainless steel, of a width of 600 mm or more
Show details
72.19.1
Not further worked than hot-rolled- in coils
72.19.11.00.00.00
Of a thickness exceeding 10 mm
72.19.12.00.00.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
72.19.13.00.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
72.19.14.00.00.00
Of a thickness of less than 3 mm
72.19.2
Not further worked than hot-rolled- not in coils
72.19.21.00.00.00
Of a thickness exceeding 10 mm
72.19.22.00.00.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
72.19.23.00.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
72.19.24.00.00.00
Of a thickness of less than 3 mm
72.19.3
Not further worked than cold-rolled cold-reduced
72.19.31.00.00.00
Of a thickness of 4.75 mm or more
72.19.32.00.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
72.19.33.00.00.00
Of a thickness exceeding 1 mm but less than 3 mm
72.19.34.00.00.00
Of a thickness of 0.5 mm or more but not exceeding 1 mm
72.19.35.00.00.00
Of a thickness of less than 0.5 mm
72.19.90.00.00.00
Other
72.20
Flat-rolled products of stainless steel- of a width of less than 600 mm
Show details
72.20.1
Not further worked than hot-rolled
72.20.11.00.00.00
Of a thickness of 4.75 mm or more
72.20.12.00.00.00
Of a thickness of less than 4.75 mm
72.20.20.00.00.00
Not further worked than cold-rolled cold-reduced
72.20.90.00.00.00
Other