HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 76
7601.00.0000
Unwrought aluminium
Show details
7601.10.0000
Aluminium, not alloyed
7601.10.1000
Slabs
7601.10.9000
Other
7601.20.0000
Aluminium alloys
7601.20.3000
Slabs
7601.20.4000
Billets
7601.20.8000
Other
7602.00.0000
Aluminium waste and scrap
Show details
7602.00.1100
Waste
7602.00.1900
Other (including factory rejects)
7602.00.9000
Scrap
7603.00.0000
Aluminium powders and flakes
Show details
7603.10.0000
Powders of non-lamellar structure
7603.20.0000
Powders of lamellar structure; flakes
7604.00.0000
Aluminium bars, rods and profiles
Show details
7604.10.0000
Of aluminium, not alloyed
7604.10.1000
Other
7604.10.1011
Unassembled, containing not more than 99.3% of aluminium
7604.10.1090
Other
7604.10.9000
Profiles
7604.10.9011
Unassembled, containing not more than 99.3% of aluminium
7604.10.9019
Other
7604.10.9025
Unassembled, containing not more than 99.3% of aluminium
7604.10.9029
Other
7604.10.9080
Unassembled, containing not more than 99.3% of aluminium
7604.10.9089
Other
7604.21.0000
Hollow profiles
7604.21.0010
one closed chamber of aluminum alloy 6063-T5 or 6060-T5, -a wall thickness of not more than 0,7 mm, and -an anodized layer of 10 μm at the surface, for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and
7604.21.0090
Other
7604.29.0000
Other
7604.29.1000
Bars and rods
7604.29.1010
Sheets and bars of aluminium-lithium alloys
7604.29.1030
Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm
7604.29.1040
Bars and rods of aluminium alloys containing by weight : - 0,25 % or more but not more than 7 % of zinc, and - 1 % or more but not more than 3 % of magnesium, and - 1 % or more but not more than 5 % of copper, and - not more than 1 % of manganese consiste
7604.29.1090
Other
7604.29.9000
Profiles
7604.29.9010
Bearing a specific manufacture number, for use in certain types of aircraft
7604.29.9020
Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft
7604.29.9090
Other
7605.00.0000
Aluminium wire
Show details
7605.11.0000
Of aluminium, not alloyed
7605.19.0000
Other
7605.19.0010
Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm
7605.19.0090
Other
7605.21.0000
Of aluminium alloys
7605.21.0010
Aluminium alloy wire with a diameter of 9,50mm or more but not more than 19,15mm, in coils, for use in the manufacture of aeronautical fasteners
7605.21.0090
Other
7605.29.0000
Other
7605.29.0010
Wire of aluminium alloys containing by weight: - 0,10 % or more but not more than 5 % of copper, and - 0,2 % or more but not more than 6 % of magnesium, and - 0,10 % or more but not more than 7 % of zinc, and - not more than 1 % of manganese consistent wi
7605.29.0090
Other
7606.00.0000
Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
Show details
7606.10.0000
Rectangular (including square)
7606.11.0000
Of aluminium, not alloyed
7606.11.3000
Aluminium Composite Panel
7606.11.5000
Other
7606.11.5025
Plates bearing a specific manufacture number, for use in certain types of aircraft :
7606.11.5030
Other
7606.11.5080
Other
7606.11.5086
Not backed, without internal layers of other material
7606.11.5089
Other
7606.11.9100
Other, of a thickness of
7606.11.9125
Not backed, without internal layers of other material
7606.11.9130
Other
7606.11.9186
Not backed, without internal layers of other material
7606.11.9189
Other
7606.11.9300
Not less than 3 mm but less than 6 mm
7606.11.9325
Not backed, without internal layers of other material
7606.11.9330
Other
7606.11.9386
Not backed, without internal layers of other material
7606.11.9389
Other
7606.11.9900
Not less than 6 mm
7606.11.9925
Not backed, without internal layers of other material
7606.11.9930
Other
7606.11.9986
Not backed, without internal layers of other material
7606.11.9989
Other
7606.12.0000
Of aluminium alloys
7606.12.1000
Beverage can body stock, end stock and tab stock :
7606.12.1100
Beverage can body stock
7606.12.1900
Beverage can end stock and tab stock
7606.12.3000
Aluminium Composite Panel
7606.12.5000
Other
7606.12.5020
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.12.5023
Not backed, without internal layers of other material
7606.12.5025
Other
7606.12.5030
Other
7606.12.5080
Other
7606.12.5085
For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
7606.12.5087
Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606.12.5088
Other
7606.12.5089
Other
7606.12.9200
Other, of a thickness of
7606.12.9223
Of a thickness of not less than 0,8 mm
7606.12.9225
Other
7606.12.9230
Other
7606.12.9290
Other
7606.12.9291
For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
7606.12.9292
Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of coated coils and aluminium composite panels (TN091)
7606.12.9293
Other
7606.12.9297
Other
7606.12.9300
Not less than 3 mm but less than 6 mm
7606.12.9310
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.12.9385
For use as body panels in the car industry or for use in the manufacture of aircraft parts
7606.12.9386
Other
7606.12.9388
Other
7606.12.9390
Other
7606.12.9900
Not less than 6 mm
7606.12.9910
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.12.9920
Sheets and bars of aluminium-lithium alloys
7606.12.9921
For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts
7606.12.9925
Other
7606.12.9930
Other
7606.12.9985
For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts
7606.12.9986
Other
7606.12.9988
Other
7606.12.9990
Other
7606.91.0000
Other
7606.91.0025
Not backed, without internal layers of other material, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; in plates, of a thickness exceeding 6 mm
7606.91.0030
Other
7606.91.0086
Not backed, without internal layers of other material, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; in plates, of a thickness exceeding 6 mm
7606.91.0088
Other
7606.92.0000
Of aluminium alloys
7606.92.0023
Of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts
7606.92.0025
Other
7606.92.0030
Other
7606.92.0085
For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
7606.92.0090
Other
7606.92.0091
Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of coated coils and aluminium composite panels (TN091)
7606.92.0092
Other
7606.92.0095
Other
7607.00.0000
Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
Show details
7607.11.0000
Not backed
7607.11.1100
Of a thickness of less than 0,021 mm
7607.11.1110
Of a thickness of 0,007A mm or more but less than 0,021A mm
7607.11.1111
Consigned from Thailand
7607.11.1119
Other
7607.11.1190
Other
7607.11.1900
Other
7607.11.1910
Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm
7607.11.1930
Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed
7607.11.1940
Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed
7607.11.1950
Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
7607.11.1960
For other uses, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or, - Of
7607.11.1991
Aluminium converter foil
7607.11.1994
Household aluminium foil
7607.11.1996
Other
7607.11.9000
Of a thickness of not less than 0,021 mm but not more than 0,2 mm
7607.11.9044
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.9045
Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 %
7607.11.9046
Other
7607.11.9047
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses
7607.11.9048
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.9049
Other
7607.11.9051
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
7607.11.9052
Alloyed, for use as body panels in the car industry
7607.11.9053
Other
7607.11.9054
Other
7607.11.9056
Other
7607.11.9057
Other
7607.11.9065
Without internal layers of other material, in coils or in coiled strips
7607.11.9067
Other
7607.11.9071
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.9072
Other
7607.11.9073
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.9074
Other
7607.11.9075
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
7607.11.9076
For use as body panels in the car industry
7607.11.9077
Other
7607.11.9078
Other
7607.11.9079
Other
7607.11.9080
Other
7607.11.9082
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses
7607.11.9083
Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-H19 or 5052-H19,- in rolls with an outside diameter of not more than 1 350 mm , - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,- a widt
7607.11.9087
Other
7607.11.9091
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
7607.11.9092
Alloyed, for use as body panels in the car industry
7607.11.9093
Other
7607.11.9094
Other
7607.11.9096
Other
7607.19.0000
Other
7607.19.1000
Of a thickness of less than 0,021 mm
7607.19.1010
Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10A kg, not further worked than rolled, embossed
7607.19.1011
Consigned from Thailand
7607.19.1019
Other
7607.19.1090
Other
7607.19.9000
Of a thickness of not less than 0,021 mm but not more than 0,2 mm
7607.19.9075
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
7607.19.9084
Alloyed, for use as body panels in the car industry
7607.19.9093
Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of coated coils and aluminium composite panels (TN091)
7607.19.9094
Other
7607.19.9095
Other
7607.19.9096
Other
7607.20.0000
Backed
7607.20.1000
Of a thickness (excluding any backing) of less than 0,021 mm
7607.20.9000
Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm
7607.20.9100
Aluminium Composite Panel
7607.20.9900
Other
7607.20.9910
Aluminium foil, in rolls:-coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,-with a width of 200 mm or more, but not mor
7607.20.9990
Other
7608.00.0000
Aluminium tubes and pipes
Show details
7608.10.0000
Of aluminium, not alloyed
7608.10.0011
Unassembled, not welded, containing not more than 99.3% of aluminium
7608.10.0019
Other
7608.10.0020
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
7608.10.0080
Unassembled, not welded, containing not more than 99.3% of aluminium
7608.10.0089
Other
7608.20.0000
Of aluminium alloys
7608.20.2000
Welded
7608.20.2010
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft (TN100)
7608.20.2020
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
7608.20.2090
Other
7608.20.8100
Other
7608.20.8110
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft (TN100)
7608.20.8120
Seamless aluminium alloyed extruded tubes (Aluminum 6061F according to standard ASTM B241) with: -an outer diameter of 320 mm or more but not more than 400 mm, and -a wall thickness of 8 mm or more but not more than 10 mm, for use in the manufacture of hi
7608.20.8190
Other
7608.20.8900
Other
7608.20.8910
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft (TN100)
7608.20.8920
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
7608.20.8930
Seamless aluminium alloyed extruded tubes with: - an outer diameter of 60 mm or more but not more than 420 mm, and - a wall thickness of 10 mm or more but not more than 80 mm
7608.20.8940
Seamless flow forming aluminium alloyed tubes (Aluminum 6061A according to standard ISO 7866) with: -an outer diameter of 378 mm or more but not more than 385 mm, and -a wall thickness of 4 mm or more but not more than 7 mm for use in the manufacture of h
7608.20.8990
Other
7609.00.0000
Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)
Show details
7609.00.0010
For use in certain types of aircraft
7609.00.0030
Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not m
7609.00.0040
Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:-with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,-wi
7609.00.0050
Machined aluminium components:-containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,-containing by weight 0,55 %, or more but not more than 0,61 % of silicon,-with a hardening state of T5 or T6,-with a mass of 0,05 kg or more, but no
7609.00.0060
Aluminium connection block:-with a weight of 3 g or more but not more than 400 g,-manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,-being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake l
7609.00.0090
Other
7610.00.0000
Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors andwindows and their frames and thresholds for doors, balus
Show details
7610.10.0000
Doors, windows and their frames and thresholds for doors
7610.90.0000
Other
7610.90.1000
Bridges and bridge-sections, towers and lattice masts
7610.90.9000
Other
7610.90.9010
Bars, rods, profiles (whether or not hollow), tubes, pipes, unassembled, not welded, made from aluminium, whether or not alloyed, containing not more than 99.3% of aluminium
7610.90.9090
Other
7610.90.9091
Products attached (e.g. by welding or fasteners) to form subassemblies
7610.90.9092
Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’)
7610.90.9095
Other
7611.00.0000
Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but notfitted with mechanical or thermal equipment
7612.00.0000
Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but
Show details
7612.10.0000
Collapsible tubular containers
7612.90.0000
Other
7612.90.2000
Containers of a kind used for aerosols
7612.90.3000
Manufactured from foil of a thickness not exceeding 0,2 mm
7612.90.8000
Other
7613.00.0000
Aluminium containers for compressed or liquefied gas
Show details
7613.00.0010
Bottles for inflating escape chutes, intended for use in certain types of aircraft
7613.00.0020
Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (A+ or -10 %) and an unfilled weight of not more than 64 kg
7613.00.0090
Other
7614.00.0000
Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated
Show details
7614.10.0000
With steel core
7614.90.0000
Other
7615.00.0000
Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium
Show details
7615.10.0000
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
7615.10.1000
Cast
7615.10.1010
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7615.10.1090
Other
7615.10.3000
Manufactured from foil of a thickness not exceeding 0,2 mm
7615.10.8000
Other
7615.10.8010
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7615.10.8090
Other
7615.20.0000
Sanitary ware and parts thereof
7616.00.0000
Other articles of aluminium
Show details
7616.10.0000
Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
7616.10.0010
Self-locking bolts and nuts (of the type "Hi-lok")
7616.10.0091
Other
7616.10.0099
Other
7616.91.0000
Other
7616.99.0000
Other
7616.99.1000
Cast
7616.99.1010
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
7616.99.1020
Quick change apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
7616.99.1091
Other
7616.99.1099
Other
7616.99.9000
Other
7616.99.9001
Hand-made
7616.99.9009
Other
7616.99.9010
Other
7616.99.9015
Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts
7616.99.9020
Quick change apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
7616.99.9025
Metallised film: - consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more, - with an optical density of each aluminium layer of not more than 3.0, - with each aluminium layer separated by a resin layer, - on a car
7616.99.9030
Plates and sheets of variable thickness of widths of 1 200 mm or more, for use in certain types of aircraft
7616.99.9035
Aluminum plate with: -a length of 36 mm or more but not more than 49 mm, -a width of 29,8 mm or more but not more than 45,2 mm, -a thickness of 0,18 mm or more but not more than 0,66 mm, equipped with a polypropylene tape with: -a length of 6,5 mm or more
7616.99.9060
Disc (target) with deposition material, consisting of molybdenum silicide: - containing 1mg/kg or less of sodium and - mounted on a copper or aluminium support
7616.99.9070
Connecting components for use in the production of helicopter tail rotor shafts
7616.99.9077
Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body
7616.99.9091
Other
7616.99.9099
Other