HS Code Finder
Find HSN Code or ITC HS Code and their GST Rates for your product with our HSN Code Search Tool. Search by either product name or HSN Code. Use a category list as an alternative way to get to your products HS code.
HS Code for 85
8501.00.0000
Electric motors and generators (excluding generating sets)
Show details
8501.10.0000
Motors of an output not exceeding 37,5 W
8501.10.1000
Synchronous motors of an output not exceeding 18 W
8501.10.1010
For use in certain types of aircraft
8501.10.1020
Synchronous motor for a dishwasher with a water flow control mechanism with - a length without axle of 24 mm (+/- 0,3), - a diameter of 49,3 mm (+/- 0,3) - a rated voltage of 220 V AC or more but not more than 240 V AC, - a rated frequency of 50 Hz or mor
8501.10.1030
Motors for air pumps, with:operating voltage of 9 VDC or more but not more than 24 VDC,operating temperature range of -40C or more but not more than 80C,an output not exceeding 18 W for use in the manufacture of pneumatic support and ventilation systems f
8501.10.1040
Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers
8501.10.1050
Linear actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or no
8501.10.1060
Rotary actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with Hall Effec
8501.10.1090
Other
8501.10.9100
Other
8501.10.9110
For use in certain types of aircraft
8501.10.9190
Other
8501.10.9300
AC motors
8501.10.9310
For use in certain types of aircraft
8501.10.9390
Other
8501.10.9900
DC motors
8501.10.9910
For use in certain types of aircraft
8501.10.9920
Worm axis motor for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with a worm wheel,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with Hall Effect Sensor,-with a
8501.10.9930
Linear actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or no
8501.10.9940
Rotary actuator for automotive electric seat adjustment applications:-consisting of a permanently excited DC motor with an integrated gear mechanism,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with Hall Effec
8501.10.9950
Electric (DC) motor powering height adjusting with:-a rated output mechanical power not exceeding 35 W,-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,-a stall torque of 45 Nm and ultimate torque o
8501.10.9956
Other
8501.10.9958
DC Motor : - with a speed rotation of not more than 6500 rpm (without load), - with a nominal voltage of 12 V (plus or minus 4 V), - with a maximal power below than 20 W, - with a specified temperature range from -40 degree C to 160 degree C, - with a wo
8501.10.9960
DC motor - with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded - with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers
8501.10.9964
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/0,1),
8501.10.9965
Electric turbocharger actuator, with: - a DC motor, - an integrated gear mechanism, - a (pulling)force of 200 N or more at a minimum of 140 degree C elevated ambient temperature, - a (pulling) force of 250 N or more in each position of its stroke, - an ef
8501.10.9970
DC stepping motor, with - an angle of step of 7,5degree(A+ or -0,5 degree - a two-phase winding, - a rated voltage of 9 V or more, but not more than 16,0 V - of a specified temperature range covering at least - 40 degree C to + 105 degree C - with or with
8501.10.9975
Permanently excited DC motor with - a multiple-phase winding - an external diameter of 28 mm or more but not more than 35 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V
8501.10.9979
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20degree C to + 70degree C
8501.10.9980
DC stepping motor, with: - an angle of step of 7,5 degree(A+ or -0,5 degree), - a pull-out torque at 25 degree C of 25 mNm or more, - a pull-out pulse rate of 1 500 pps or more, - a two-phase winding, and - a rated voltage of 10,5 V or more, but not more
8501.10.9990
Other
8501.20.0000
Universal AC/DC motors of an output exceeding 37,5 W
8501.20.0010
Of an output exceeding 735 W but not exceeding 150 kW, for use in civil aircraft (TN100)
8501.20.0020
Of an output of less than 750 W or exceeding 150 kW, for use in certain types of aircraft
8501.20.0040
Universal AC/DC motor with:-a rated output of 50W but not higher than 1,2kW,；-a supply voltage of 230V,；-whether or notwith engine brake,；-whether or notassembled to a reduction gear with output shaft, which is contained in a housing,；-whether or not f
8501.20.0050
Universal AC/DC motor, rotating:-with a nominal supply voltage of 230V,；-with a power of more than 37,5W but not more than 2000W,；-with a stator cross-section of 93mm or morebut not more than 103mm and a thickness of 15mm or morebut not more than 45mm, an
8501.20.0060
Universal AC/DC motor, rotating:-with a nominal supply voltage of 230V,；-with a power of more than 37,5W but not more than 1200W,；-with a stator cross-section of 65mm or more but not more than 75mmand a thickness of 15mm or morebut not more than 45mm, and
8501.20.0070
Universal AC/DC motor, rotating:-with a nominal supply voltage of 230V,；-with a power of more than 37,5W but not more than 700W,；-with a stator cross-section of 49mm or more but not more than 59mmand a thickness of 15mm or morebut not more than 45mm,and；-
8501.20.0090
Other
8501.31.0000
Other DC motors; DC generators
8501.31.0010
Motors of an output exceeding 735 W, DC generators, for use in civil aircraft (TN100)
8501.31.0020
for use in certain types of aircraft
8501.31.0045
DC motors, brushless, with: - an external diameter of 90 mm or more, but not more than 110 mm, - a rated speed of not more than 3 680 rpm, - an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 degree C, - a supply voltage of 12 V, -
8501.31.0047
Motor for automotive electric seat adjustment applications:-with a shaft output on both motor sides,-consisting of a permanently excited DC motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effec
8501.31.0050
DC motors, brushless, with: - an external diameter of 80 mm or more, but not more than 200 mm,- a supply voltage of 9 V or more, but not more than 16 V,- an output at 20 degree celcius of 300 W or more, but not more than 750 W,- a torque at 20 degree celc
8501.31.0055
DC motor with commutator, with - an external diameter of 27.5 mm or more, but not more than 45 mm, - a rated speed of 11 000 rpm or more, but not more than 23 200 rpm, - a rated supply voltage of 3.6 V or more, but not more than 230 V, - an output power o
8501.31.0058
Permanently excited DC motor with: -an external diameter of 30 mm or more but not more than 90 mm, including mounting flange, -a rated speed of not more than 15 000 rpm, -an output of 45 W or more but not more than 400 W, and -a supply voltage of 9 V or m
8501.31.0063
Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with
8501.31.0068
Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:；-a length of 110 mm or more but not more than 140 mm,；-a width of 90 mm or more b
8501.31.0080
Electronic actuator consisting of:- a DC motor having a power of less than 600 W,- for usage with a supply voltage of 12 V to 48 V,- with motor connection (plug-in connection),- with contactless position sensor,- built in a rectangular housing of a width
8501.31.0099
Other
8501.32.0000
Of an output exceeding 750 W but not exceeding 75 kW
8501.32.0010
For use in civil aircraft (TN100)
8501.32.0040
DC motor with or without commutator, withan external diameter of 24,2 mm or more, but not more than 140 mm,a rated speed of 3300 rpm or more, but not more than 26200 rpm,a rated supply voltage of 3,6 V or more, but not more than 230 V,an output power of m
8501.32.0065
Ready for installation in vehicles or equipment of headings 8432and 8433,brushless and permanently excited direct current motor with:；-a specified speed of not more than 4100rpm,；-a minimum output of 400W, but not more than 1,3kW (at 12V), or with a minim
8501.32.0099
Other
8501.33.0000
Of an output exceeding 75 kW but not exceeding 375 kW
8501.33.0010
Motors of an output not exceeding 150 kW and generators, for use in civil aircraft (TN100)
8501.33.0020
Of an output exceding 150 kW, for use in certain types of aircraft
8501.33.0030
Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics
8501.33.0099
Other
8501.34.0000
Of an output exceeding 375 kW
8501.34.0010
Generators for use in civil aircraft (TN100)
8501.34.0099
Other
8501.40.0000
Other AC motors, single-phase
8501.40.2000
Of an output not exceeding 750 W
8501.40.2010
Of an output exceeding 735 W, for use in civil aircraft (TN100)
8501.40.2020
For use in certain types of aircraft
8501.40.2035
Electric AC motor, single-phase, with: -a rated power of 120 W or more but not more than 150 W, -an input power of 280 W or more but not more than 350 W, -an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm
8501.40.2045
Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a
8501.40.2050
Electric AC motor, single-phase, with: -a rated power of 300 W or more but not more than 370 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a r
8501.40.2055
Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, -a
8501.40.2060
Electric AC motor, single-phase, with: -a rated power of 275 W or more but not more than 325 W, -an output power of 550 W or more but not more than 600 W, -an input power of 800 W or more but not more than 1 000 W, -an external diameter of more than 150
8501.40.2065
Electric AC motor, single-phase, whether or not with commutator- with a nominal output of 180 W or more,- with an input power of 150 W or more but not more than 2 700 W,- with an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (±
8501.40.2080
Other
8501.40.8000
Of an output exceeding 750 W
8501.40.8010
Of an output not exceeding 150 kW, for use in civil aircraft (TN100)
8501.40.8020
Of an output exceeding 150 kW, for use in certain types of aircraft
8501.40.8030
Electric AC commutator motor, single-phase, with an output of more than 750 W, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (A+ or -0,2 mm) but not more than 135 mm (A+ or -0,2 mm), a rated speed of m
8501.40.8050
Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics
8501.40.8060
Electric AC motor, single-phase, whether or not with commutator- with a nominal output of 180 W or more,- with an input power of 150 W or more but not more than 2 700 W,- with an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (±
8501.40.8090
Other
8501.51.0000
Other AC motors, multi-phase
8501.51.0010
Of an output exceeding 735 W, for use in civil aircraft (TN100)
8501.51.0020
Of an output of less than 750 W, for use in certain types of aircraft
8501.51.0030
AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with: - an output of 340 W or more but not more than 7,4 kW, - a flange of dimensions ofnot more than 180 mm x 180 mm, and - a length from flange to extreme
8501.51.0040
Electric AC motor, three-phase, with: -a rated power of 280 W or more but not more than 320 W, -an output power of 480 W or more but not more than 540 W, -an input power of 800 W or more but not more than 900 W, -an external diameter of 150 mm or more bu
8501.51.0050
Three phase AC synchronous brushless permanent magnet motor with:；-an output of 500W or more but not more than 700W,；-an external diameter of 129,7mm or more but not more than 180,3mm,；-a rated speed of 16000rpm or more but not more than 17000rpm,；-a weig
8501.51.0090
Other
8501.52.0000
Of an output exceeding 750 W but not exceeding 75 kW
8501.52.2000
Of an output exceeding 750 W but not exceeding 7,5 kW
8501.52.2010
For use in civil aircraft (TN100)
8501.52.2050
Other
8501.52.2089
Other
8501.52.3000
Of an output exceeding 7,5 kW but not exceeding 37 kW
8501.52.3010
For use in civil aircraft (TN100)
8501.52.3090
Other
8501.52.9000
Of an output exceeding 37 kW but not exceeding 75 kW
8501.52.9010
For use in civil aircraft (TN100)
8501.52.9090
Other
8501.53.0000
Of an output exceeding 75 kW
8501.53.5000
Traction motors
8501.53.5010
Electric drive for motor vehicles, with an output of not more than 315 kW, with: an AC or DC motor whether or not with transmission, power electronics
8501.53.5020
AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with: -a torque output of 200 Nm or more, but not more than 400 Nm, -a power output of 50 kW or more, but not more than 200 kW , -a rotation speed of no more than 15 000 rpm
8501.53.5030
Permanent magnet synchronous traction motor, with: -a continuous power of 110 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 500 mm or more but not more than 650 mm, -a total width of 600 mm or more but not more than 700
8501.53.5040
Permanent magnet traction AC motor, with
8501.53.5050
Asynchronous traction motor, with: -a continuous power of 140 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 580 mm or more but not more than 730 mm, -a total width of 550 mm or more but not more than 670 mm, -a total hei
8501.53.5090
Other
8501.53.8100
Other, of an output
8501.53.8110
Of an output not exceeding 150 kW, for use in civil aircraft (TN100)
8501.53.8120
Of an output exceeding 150 kW, for use in certain types of aircraft
8501.53.8190
Other
8501.53.9400
Exceeding 375 kW but not exceeding 750 kW
8501.53.9410
For use in certain types of aircraft
8501.53.9490
Other
8501.53.9900
Exceeding 750 kW
8501.53.9910
For use in certain types of aircrafts
8501.53.9990
Other
8501.61.0000
AC generators (alternators)
8501.61.2000
Of an output not exceeding 7,5 kVA
8501.61.2010
For use in civil aircraft (TN100)
8501.61.2090
Other
8501.61.8000
Of an output exceeding 7,5 kVA but not exceeding 75 kVA
8501.61.8010
For use in civil aircraft (TN100)
8501.61.8099
Other
8501.62.0000
Of an output exceeding 75 kVA but not exceeding 375 kVA
8501.62.0010
For use in civil aircraft (TN100)
8501.62.0040
AC, 3-phase generator, with: -a continuous power of 147 kVA or more but not more than 222 kVA, -a continuous torque of 650 Nm or more but not more than 900 Nm, -a maximum working speed of 2700 revolutions per minute (rpm), -a liquid cooled system, -a leng
8501.62.0098
Other
8501.63.0000
Of an output exceeding 375 kVA but not exceeding 750 kVA
8501.63.0010
For use in civil aircraft (TN100)
8501.63.0099
Other
8501.64.0000
Of an output exceeding 750 kVA
8501.70.0000
Photovoltaic DC generators :
8501.71.0000
Of an output not exceeding 50 W
8501.72.0000
Of an output exceeding 50 W
8501.80.0000
Photovoltaic AC generators
8502.00.0000
Electric generating sets and rotary converters
Show details
8502.11.0000
Generating sets with compression-ignition internal combustion piston engines (diesel or semi-diesel engines)
8502.11.2000
Of an output not exceeding 7,5 kVA
8502.11.2010
For use in civil aircraft (TN100)
8502.11.2090
Other
8502.11.8000
Of an output exceeding 7,5 kVA but not exceeding 75 kVA
8502.11.8010
For use in civil aircraft (TN100)
8502.11.8090
Other
8502.12.0000
Of an output exceeding 75 kVA but not exceeding 375 kVA
8502.12.0010
For use in civil aircraft (TN100)
8502.12.0090
Other
8502.13.0000
Of an output exceeding 375 kVA
8502.13.2000
Of an output exceeding 375 kVA but not exceeding 750 kVA
8502.13.2010
For use in civil aircraft (TN100)
8502.13.2090
Other
8502.13.4000
Of an output exceeding 750 kVA but not exceeding 2 000 kVA
8502.13.4010
For use in civil aircraft (TN100)
8502.13.4090
Other
8502.13.8000
Of an output exceeding 2 000 kVA
8502.13.8010
For use in civil aircraft (TN100)
8502.13.8090
Other
8502.20.0000
Generating sets with spark-ignition internal combustion piston engines
8502.20.2000
Of an output not exceeding 7,5 kVA
8502.20.2010
For use in civil aircraft (TN100)
8502.20.2090
Other
8502.20.4000
Of an output exceeding 7,5 kVA but not exceeding 375 kVA
8502.20.4010
For use in civil aircraft (TN100)
8502.20.4090
Other
8502.20.6000
Of an output exceeding 375 kVA but not exceeding 750 kVA
8502.20.6010
For use in civil aircraft (TN100)
8502.20.6090
Other
8502.20.8000
Of an output exceeding 750 kVA
8502.20.8010
For use in civil aircraft (TN100)
8502.20.8090
Other
8502.31.0000
Other generating sets
8502.31.0011
Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whe
8502.31.0019
Other
8502.31.0085
Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whe
8502.31.0097
Other
8502.39.0000
Other
8502.39.2000
Turbo-generators
8502.39.2010
For use in civil aircraft (TN100)
8502.39.2090
Other
8502.39.8000
Other
8502.39.8010
For use in civil aircraft (TN100)
8502.39.8090
Other
8502.40.0000
Electric rotary converters
8502.40.0010
For use in civil aircraft (TN100)
8502.40.0090
Other
8503.00.0000
Parts suitable for use solely or principally with the machines of heading 8501 or 8502
Show details
8503.00.1000
Non-magnetic retaining rings
8503.00.1010
For use in certain types of aircraft
8503.00.1090
Other
8503.00.9100
Other
8503.00.9110
For use in certain types of aircraft
8503.00.9131
Other
8503.00.9199
Other
8503.00.9900
Other
8503.00.9910
For use in certain types of aircraft
8503.00.9931
Other
8503.00.9932
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring
8503.00.9933
Stator for brushless motor of electrical power steering with a roundness tolerance of 50 u(mu)m
8503.00.9934
Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 u(mu)m
8503.00.9937
Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with: - diameter of the rotor body of 17 mm or more but not more than 37 mm, - length of the rotor body of 12 mm or more but
8503.00.9943
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with o
8503.00.9955
Stator for brushless motor, with:an internal diameter of 206,6 mm (plus and minus 0,5) an external diameter of 265,0 mm (plus and minus 0,2) and a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, was
8503.00.9960
Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (A+ or -0,25 mm)
8503.00.9965
Rotor body of stacked electrical sheet having: -a diameter of 18 mm or more but not more than 35 mm, and -a length of 20 mm or more but not more than 65 mm
8503.00.9970
Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads fo
8503.00.9975
Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm
8503.00.9980
Steel motor housing having: -an inner diameter of 35 mm or more but not more than 65 mm, -an outer diameter of 35 mm or more but not more than 70 mm, and -a length of 35 mm or more but not more than 150 mm
8503.00.9999
Other
8504.00.0000
Electrical transformers, static converters (for example, rectifiers) and inductors
Show details
8504.10.0000
Ballasts for discharge lamps or tubes
8504.10.2000
Inductors, whether or not connected with a capacitor
8504.10.2010
For use in civil aircraft
8504.10.2090
Other
8504.10.8000
Other
8504.10.8010
For use in civil aircraft
8504.10.8090
Other
8504.21.0000
Liquid dielectric transformers
8504.22.0000
Having a power handling capacity exceeding 650 kVA but not exceeding 10 000 kVA
8504.22.1000
Exceeding 650 kVA but not exceeding 1 600 kVA
8504.22.9000
Exceeding 1 600 kVA but not exceeding 10 000 kVA
8504.23.0000
Having a power handling capacity exceeding 10 000 kVA
8504.31.0000
Other transformers
8504.31.2100
Measuring transformers
8504.31.2110
For use in civil aircraft
8504.31.2190
Other
8504.31.2900
Other
8504.31.2910
For use in civil aircraft
8504.31.2990
Other
8504.31.8000
Other
8504.31.8010
For use in civil aircraft
8504.31.8015
Electrical Transformer with - a capacity of 192 Watts or 216 Watts - dimensions of not more than 27,1 x 26,6 x 18 mm - an operating temperature range of - 40 degree celcius or more, but not more than + 125 degree celcius - three or four inductively couple
8504.31.8025
Electrical Transformer with - a capacity of 432 Watts - dimensions of not more than 24 mm x 21 mm x19 mm - an operating temperature range of - 20 degree celcius or more, but not more than + 85 degree celcius - two windings and - 5 connection pins at the b
8504.31.8030
Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters
8504.31.8035
Electrical Transformer with - a capacity of 433 Watts - dimensions of not more than 37,3 x 38,2 x 28,5 mm - an operating temperature range of - 40 degree celcius or more, but not more than + 125 degree celcius - four inductively coupled copper wire windin
8504.31.8045
Electrical Transformer with: - a capacity of 0,2 Watts, - dimensions of not more than 15 x 15,5 x 14 mm, - an operating temperature range of - 10 degree celcius or more, but not more than + 125 degree celcius, - two inductively coupled copper wire winding
8504.31.8050
Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry
8504.31.8055
Electrical transformer with: a capacity of 0,22 kVA or more, but not more than 0,24 kVA, an operating temperature range of + 10°C or more, but not more than + 125°C, four or five inductively coupled copper wire windings, 11 or 12 connection pins at the bo
8504.31.8090
Other
8504.32.0000
Having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA
8504.32.0010
For use in civil aircraft
8504.32.0090
Other
8504.33.0000
Having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA
8504.33.0010
For use in civil aircraft
8504.33.0090
Other
8504.34.0000
Having a power handling capacity exceeding 500 kVA
8504.40.0000
Static converters
8504.40.60
Accumulator chargers :
8504.40.6010
For use in civil aircraft
8504.40.6090
Other
8504.40.8300
Other
8504.40.8310
For use in civil aircraft
8504.40.8390
Other
8504.40.8500
Inverters
8504.40.8510
For use in civil aircraft
8504.40.8590
Other
8504.40.8600
Having a power handling capacity exceeding 7,5 kVA
8504.40.8610
For use in civil aircraft
8504.40.8690
Other
8504.40.9500
Other
8504.40.9510
For use in civil aircraft
8504.40.9590
Other
8504.50.0000
Other inductors
8504.50.0010
For use in civil aircraft
8504.50.0090
Other
8504.50.9500
Other
8504.90.0000
Parts
8504.90.1100
Other
8504.90.1300
Steel laminations and cores, whether or not stacked or wound
8504.90.1700
Other
8504.90.1800
Other
8504.90.9000
Of static converters
8504.90.9900
Other
8505.00.0000
Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagneticcouplings, clutches and brakes; electromagnetic lifting
Show details
8505.11.0000
Permanent magnets and articles intended to become permanent magnets after magnetisation
8505.11.1010
Containing neodymium, praseodymium, dysprosium or samarium
8505.11.1047
Other
8505.11.1050
Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:；-a length of 15mm or more but not more than 52mm,；-a width of 5mm or more but not more than 42mm,of a kind to be use
8505.11.1053
Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with；-a length of 97,5mm or more, but not more than 225mm；-a diameter of 19mm or more, but not more than 25mm
8505.11.1063
Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with-an external diameter of not more than 45mm,-a height of not more than 45mm,of a kind used in the manufacture of permanent magnets after magnetisation
8505.11.1065
Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having；-a length of not more than 140mm,；-a width of not more than 90mm and；-a t
8505.11.1068
Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:；-a length of 13,8mm or more but not more than 45,2mm,；-a width of 7,8mm or more b
8505.11.1070
Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet；-whether or not containing a hole in the centre,；-with a diameter of not more than 90mm,of a kind used
8505.11.1073
Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:；-a
8505.11.1075
A quarter sleeve intended to become permanent magnet after magnetization,；-consisting of at least neodymium, iron and boron,；-with a width of 9,1mm or more but not more than 10,5mm,；-with a length of 20mm or more but not more than 30,1mm,of a kind used on
8505.11.1078
Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions: -a length of 200 mm or more but not more than 205 mm, -a width of 58 mm or more but not more than 62 mm, -a h
8505.11.1099
Other
8505.11.9010
Other
8505.11.9073
Other
8505.11.9075
A quarter sleeve intended to become permanent magnet after magnetization,；-consisting of at least neodymium, iron and boron,；-with a width of 9,1mm or more but not more than 10,5mm,；-with a length of 20mm or more but not more than 30,1mm,of a kind used on
8505.11.9099
Other
8505.19.0000
Other
8505.19.1000
Permanent magnets of agglomerated ferrite
8505.19.1010
For use in certain types of aircraft
8505.19.1020
Arc segments of permanent magnets of agglomerated ferrite, with: -a length of 16,8 mm or more, but not more than 110,2 mm, -a width of 14,8 mm or more, but not more than 75,2 mm, -a thickness of 4,8 mm or more, but not more than 13,2 mm, for use in the ma
8505.19.1090
Other
8505.19.9000
Other
8505.19.9010
For use in certain types of aircraft
8505.19.9030
Other
8505.19.9035
Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with: -a
8505.19.9050
Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation - whether or not with bevelled edges - of a length of 27 mm or more but not more than 32 mm (+/- 0,15 mm), - of a width of 8,5 mm or more
8505.19.9060
Article of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve to become a permanent magnet after magnetization - of a length of 30 mm or more but not more than 50 mm ( 1 mm) - of a width of 33 mm or more but not more than 55 mm ( 1 mm)
8505.19.9089
Other
8505.20.0000
Electromagnetic couplings, clutches and brakes
8505.20.0010
For use in certain types of aircraft
8505.20.0030
Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles
8505.20.0090
Other
8505.90.0000
Other, including parts
8505.90.2100
Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus other than electromagnets of heading 9018
8505.90.2900
Other
8505.90.2910
For use in certain types of aircraft
8505.90.2999
Other
8505.90.5000
Electromagnetic lifting heads
8505.90.5010
For use in certain types of aircraft
8505.90.5090
Other
8505.90.9000
Parts
8505.90.9010
For use in certain types of aircraft
8505.90.9020
Electromagnetic clutch coil in a cylindrical metal housing: -the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE, -the coil is made of copper wire, -with a weight of 0,4 kg or more but not more than 0,7 kg, -with a widt
8505.90.9090
Other
8506.00.0000
Primary cells and primary batteries
Show details
8506.10.0000
Manganese dioxide
8506.10.1100
Alkaline
8506.10.1800
Other
8506.10.9100
Other
8506.10.9800
Other
8506.30.0000
Mercuric oxide
8506.40.0000
Silver oxide
8506.50.0000
Lithium
8506.50.1000
Cylindrical cells
8506.50.1010
Lithium cylindrical primary cells with: - a diameter of 14,0 mm or more but not more than 26,0 mm; - a length of 25 mm or more but not more than 51 mm; - a voltage of 1,5 V or more, but not more than 3,6 V; - a capacity of 0,80 Ah or more, but not more th
8506.50.1090
Other
8506.50.3000
Button cells
8506.50.9000
Other
8506.50.9010
Lithium iodine single cell battery the dimensions of which do not exceed 9 mm x 23 mm x 45 mm and a voltage of not more than 2,8 V
8506.50.9030
Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm x 45 mm x 15 mm and a capacity of not less than 1,05 Ah
8506.50.9090
Other
8506.60.0000
Air-zinc
8506.80.0000
Other primary cells and primary batteries
8506.80.0500
Dry zinc-carbon batteries of a voltage of 5,5 V or more but not exceeding 6,5 V
8506.80.8000
Other
8506.90.0000
Parts
8506.90.0010
Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)
8506.90.0090
Other
8507.00.0000
Electric accumulators, including separators therefor, whether or not rectangular (including square)
Show details
8507.10.0000
Lead-acid, of a kind used for starting piston engines
8507.10.2000
Working with liquid electrolyte
8507.10.2010
For use in civil aircraft
8507.10.2090
Other
8507.10.8000
Other
8507.10.8010
For use in civil aircraft
8507.10.8090
Other
8507.20.0000
Other lead-acid accumulators
8507.20.2000
Working with liquid electrolyte
8507.20.2010
For use in civil aircraft
8507.20.2090
Other
8507.20.8000
Other
8507.20.8010
For use in civil aircraft
8507.20.8090
Other
8507.30.0000
Nickel-cadmium
8507.30.2000
Hermetically sealed
8507.30.2010
For use in civil aircraft
8507.30.2090
Other
8507.30.8000
Other
8507.30.8010
For use in civil aircraft
8507.30.8090
Other
8507.50.0000
Nickel-metal hydride
8507.50.0010
For use in civil aircraft
8507.50.0090
Other
8507.60.0000
Lithium-ion
8507.60.0010
For use in civil aircraft
8507.60.0015
Cylindrical lithium-ion-accumulators or modules with: - a nominal capacity of 8,8 Ah or more, but not more than 18 Ah, - a nominal voltage of 36 V or more, but not more than 48 V, - a power of 300 Wh or more, but not more than 648 Wh, for use in the manuf
8507.60.0018
Rectangular lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:a length of not more than 1600 mm,a width of not more than 448 mm,a height of not more than 395 mm,a weight of 125 kg or more but not more tha
8507.60.0029
A lithium-ion-rechargeable battery pack in a specific housing suitable for operating in digital cameras, having:；-a length of 70mm or more but not more than 120mm,；-a width of 60mm or more but not more than 80mm,；-a height of 15mm or more but not more
8507.60.0030
Cylindrical lithium-ion accumulator or module, with a length of 63mm or more and a diameter of 17,2mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries
8507.60.0033
Lithium-ion accumulator, with: - a length of 150 mm or more, but not more than 300 mm - a width of 700 mm or more, but not more than 1 000 mm - a height of 1 100 mm or more, but not more than 1 500 mm - a weight of 75 kg or more, but not more than 160 kg
8507.60.0037
Lithium-ion accumulator, with: - a length of 1 200 mm or more, but not more than 2 000 mm - a width of 800 mm or more, but not more than 1 300 mm - a height of 2 000 mm or more, but not more than 2 800 mm - a weight of 1 800 kg or more, but not more than
8507.60.0048
Integrated battery system in a metal case with holders, consisting of: -a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh, -Battery Management System, -a power relay, -a cooling system, -four con
8507.60.0050
Modules for the assembly of batteries of ion lithium electric accumulators with: - a length of 298 mm or more, but not more than 408 mm, - a width of 33,5 mm or more, but not more than 209 mm, - a height of 138 mm or more, but not more than 228 mm, - a we
8507.60.0058
Prismatic lithium-ion electric accumulator with: -a width of 120,0 mm or more but not more than 305,0 mm, -a thickness of 12,0 mm or more but not more than 67,0 mm, -a height of 72,0 mm or more but not more than 126,0 mm, -a nominal voltage of 3,6 V or mo
8507.60.0065
Cylindrical Lithium Ion Cell with - 3,5 VDC to 3,8 VDC, - 300 mAh to 900 mAh and - a diameter of 10,0 mm to 14,5 mm
8507.60.0068
Lithium-ion accumulator in a metal housing, with a length of 65 mm or more, but not more than 225 mm, a width of 10 mm or more, but not more than 75 mm, a height of 60 mm or more, but not more than 285 mm, a nominal voltage of 2,1 V or more, but not more
8507.60.0071
Lithium-ion rechargeable batteries, with: - a length of 700 mm or more, but not more than 2 820 mm - a width of 935 mm or more, but not more than 1 660 mm - a height of 85 mm or more, but not more than 700 mm - a weight of 280 kg or more, but not more tha
8507.60.0073
Lithium-ion Electric accumulators consisting of 3 modules containing 102 cells in total, with
8507.60.0077
Lithium-ion rechargeable batteries, with: -a length of 700 mm or more, but not more than 2 820 mm, -a width of 935 mm or more, but not more than 1 660 mm, -a height of 85 mm or more, but not more than 700 mm, -a weight of 250 kg or more, but not more than
8507.60.0083
Modules for the assembly of ion lithium electric accumulators with:
8507.60.0088
A rechargeable lithium-ion battery, with:
8507.60.0090
Other
8507.80.0000
Other accumulators
8507.80.0010
For use in civil aircraft
8507.80.0090
Other
8507.90.0000
Parts
8507.90.3000
Separators
8507.90.3010
For use in civil aircraft
8507.90.3090
Other
8507.90.8000
Other
8507.90.8010
For use in civil aircraft
8507.90.8020
Top cap made of ferrous alloy or stainless steel:；-whether or not including parts made of aluminum and aluminum alloy,；-with sealing elements or other elements made of polymer material,；-witha current interrupt device and an evacuation valve,；-with an out
8507.90.8090
Other
8508.00.0000
Vacuum cleaners
Show details
8508.11.0000
With self-contained electric motor
8508.19.0000
Other
8508.60.0000
Other vacuum cleaners
8508.70.0000
Parts
8508.70.0020
Electronic circuit cards that - are connected by wire or radio frequency to each other and the motor controller card, and - regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, - whether or
8508.70.0090
Other
8509.00.0000
Electromechanical domestic appliances, with self-contained electric motor, other than vacuum cleaners of heading 8508
Show details
8509.40.0000
Food grinders and mixers; fruit or vegetable juice extractors
8509.80.0000
Other appliances
8509.90.0000
Parts
8510.00.0000
Shavers, hair clippers and hair-removing appliances, with self-contained electric motor
Show details
8510.10.0000
Shavers
8510.20.0000
Hair clippers
8510.30.0000
Hair-removing appliances
8510.90.0000
Parts
8511.00.0000
Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (f
Show details
8511.10.0000
Sparking plugs
8511.10.0010
For use in civil aircraft
8511.10.0090
Other
8511.20.0000
Ignition magnetos; magneto-dynamos; magnetic flywheels
8511.20.0010
For use in civil aircraft
8511.20.0090
Other
8511.30.0000
Distributors; ignition coils
8511.30.0010
For use in civil aircraft
8511.30.0030
Igniter integrated coil assembly with: - an igniter, - a coil on plug assembly with an integrated mounting bracket, - a housing, - a length of 90 mm or more but not more than200 mm (+/- 5 mm), - an operating temperature of -40 degree C or more but not mor
8511.30.0055
Ignition coil: - with a length of 50 mm or more, but not more than 200 mm, - with an operating temperature of - 40 degree celcius or more, but not more than 140 degree celcius, and - with a voltage of 9 V or more, but not more than 16 V, - with or without
8511.30.0090
Other
8511.40.0000
Starter motors and dual purpose starter-generators
8511.40.0010
For use in civil aircraft
8511.40.0090
Other
8511.50.0000
Other generators
8511.50.0010
For use in civil aircraft
8511.50.0090
Other
8511.80.0000
Other equipment
8511.80.0010
For use in civil aircraft
8511.80.0090
Other
8511.90.0000
Parts
8511.90.0010
For use in certain types of aircraft
8511.90.0090
Other
8512.00.0000
Electrical lighting or signalling equipment (excluding articles of heading 8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles
Show details
8512.10.0000
Lighting or visual signalling equipment of a kind used on bicycles
8512.20.0000
Other lighting or visual signalling equipment
8512.20.0030
Lighting module, containing at least: - two LEDs, - glass or plastic lenses, focusing/scattering the light emitted by the LEDs, - reflectors redirecting the light emitted by the LEDs, in an aluminium housing with a radiator, mounted at a bracket with an a
8512.20.0040
Fog lamp with a galvanised inner surface, containing: - a plastic holder with three or more brackets, - one or more 12 V bulbs, - a connector, - a plastic cover, - whether or not with a connection cable for use in the manufacture of goods of Chapter 87
8512.20.0060
Information screen displaying: -at least time, date and status of safety features in a vehicle, or -safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit, with an operating voltage of 12 V or
8512.20.0070
Electrical component with light guide integrated with LED, for motor vehicles with:；-two parallel ribs in the front area with a distance between them of 1,4mm or more but not more than 1,8mm,；-four holes with the dimension of 7,3mm or more but not more th
8512.20.0080
Grab handle light with integrated LED, for motor vehicles:；-a distance between integrated spring clip and surface of 0,85mm or more but not more than 1,85mm,；-a length of the housing to two front vertical ribs of 26,45mm or more but not more than26,75mm,
8512.20.0090
Other
8512.30.0000
Sound signalling equipment
8512.30.1000
Burglar alarms of a kind used for motor vehicles
8512.30.9000
Other
8512.30.9010
Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: - coil, - magnet, - metal membrane, - connector, - holder of a kind used in the manufacture of goods of Chapter 87
8512.30.9020
Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: - a printed circuit board, - a connector, - whether or not a metal holder of a kind used in the manufacture of goods of chapter 87
8512.30.9030
Sound alarm device for protection against burglary into the vehicle:- with an operating temperature of - 45 degree celcius or more, but not more than + 95 degree celcius,- with a voltage of 9 V or more but not more than 16 V,- in a plastic housing,- wheth
8512.30.9040
Device for simulating engine sound at reduced speed of a hybrid or electric vehicle: -containing at least printed circuit board and loudspeaker, -in a plastic housing with a holder,for use in the manufacture of goods of Chapter 87
8512.30.9090
Other
8512.40.0000
Windscreen wipers, defrosters and demisters
8512.40.0010
Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides
8512.40.0090
Other
8512.90.0000
Parts
8512.90.1000
Of apparatus of subheading 8512 30 10
8512.90.9000
Other
8513.00.0000
Portable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading 8512
Show details
8513.10.0000
Lamps
8513.90.0000
Parts
8514.00.0000
Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss
Show details
8514.10.0000
Resistance heated furnaces and ovens
8514.11.0000
Hot isostatic presses
8514.19.0000
Other
8514.19.1000
Bakery and biscuit ovens
8514.19.8000
Other
8514.20.0000
Furnaces and ovens functioning by induction or dielectric loss
8514.20.1000
Induction furnaces and ovens
8514.20.8000
Dielectric furnaces and ovens
8514.20.8010
Cavity assembly comprising at least: - a transformer with an input of not more than 240 V and an output of not more than 3 000 W - an AC or DC fan motor with an output of not more than42 watts - a housing made of stainless steel - with or without a magnet
8514.20.8090
Other
8514.30.0000
Other furnaces and ovens
8514.31.0000
Electron beam furnaces :
8514.31.1000
Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8514.31.9000
Other
8514.32.0000
Plasma and vacuum arc furnaces :
8514.32.1000
Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8514.32.9000
Other
8514.39.0000
Other
8514.39.1000
Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8514.39.9000
Other
8514.40.0000
Other equipment for the heat treatment of materials by induction or dielectric loss
8514.90.0000
Parts
8514.90.3000
Of other furnaces and ovens of subheading 8514 30 20
8514.90.7000
Other
8515.00.0000
Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whetheror not capable of cutting; electric machines and appara
Show details
8515.11.0000
Brazing or soldering machines and apparatus
8515.19.0000
Other
8515.19.1000
Wave soldering machines of a kind used solely or principally for the manufacture of printed circuit assemblies
8515.19.9000
Other
8515.21.0000
Machines and apparatus for resistance welding of metal
8515.29.0000
Other
8515.31.0000
Machines and apparatus for arc (including plasma arc) welding of metals
8515.39.0000
Other
8515.39.1300
For manual welding with coated electrodes, complete with welding or cutting devices, and consigned with
8515.39.1800
Generators or rotary converters or static converters, rectifiers or rectifying apparatus
8515.39.9000
Other
8515.80.0000
Other machines and apparatus
8515.80.1000
For treating metals
8515.80.9000
Other
8515.90.0000
Parts
8515.90.2000
Of wave soldering machines of subheading 8515 19 10
8515.90.8000
Other
8515.90.8011
Consigned from Laos
8515.90.8012
Consigned from Thailand
8515.90.8013
Consigned from India
8515.90.8020
Other
8515.90.8030
Keypads of silicone or plastic, - whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, - whether or not printed or surface treated, - whether or not with electrical conducting elements - whether or not with keypads fo
8515.90.8040
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with o
8515.90.8090
Other
8516.00.0000
Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers, haircurlers, curling tong heaters) and hand dryers; electri
Show details
8516.10.0000
Electric instantaneous or storage water heaters and immersion heaters
8516.10.1100
Instantaneous water heaters
8516.10.8000
Other
8516.10.8010
Tubular Heating Element with mounting flange for washing machines, with:；-a nominal output power of 1700W at 230V AC supply voltage,；-a weight of 230g or more but not more than 250g,；-a thickness of the external flange of 2mm or more,；-isolation bushes of
8516.10.8090
Other
8516.21.0000
Electric space-heating apparatus and electric soil-heating apparatus
8516.29.0000
Other
8516.29.1000
Liquid-filled radiators
8516.29.5000
Convection heaters
8516.29.9100
Other
8516.29.9900
Other
8516.31.0000
Electrothermic hairdressing or hand-drying apparatus
8516.32.0000
Other hairdressing apparatus
8516.33.0000
Hand-drying apparatus
8516.40.0000
Electric smoothing irons
8516.50.0000
Microwave ovens
8516.50.0010
Cavity assembly comprising at least: - a transformer with an input of not more than 240 V and an output of not more than 3 000 W - an AC or DC fan motor with an output of not more than 42 watts - a housing made of stainless steel - with or without a magne
8516.50.0090
Other
8516.60.0000
Other ovens; cookers, cooking plates, boiling rings; grillers and roasters
8516.60.1000
Cookers (incorporating at least an oven and a hob)
8516.60.5000
Cooking plates, boiling rings and hobs
8516.60.7000
Grillers and roasters
8516.60.8000
Ovens for building in
8516.60.8010
Cavity assembly comprising at least: - a transformer with an input of not more than 240 V and an output of not more than 3 000 W - an AC or DC fan motor with an output of not more than42 watts - a housing made of stainless steel - with or without a magnet
8516.60.8090
Other
8516.60.9000
Other
8516.71.0000
Other electrothermic appliances
8516.72.0000
Toasters
8516.79.0000
Other
8516.79.2000
Deep fat fryers
8516.79.7000
Other
8516.79.7010
Ironing boards, including sleeve boards, whether or not free standing, with a steam soaking and/or heating top and/or blowing top
8516.79.7090
Other
8516.80.0000
Electric heating resistors
8516.80.2000
Assembled with an insulated former
8516.80.2010
Assembled only with a simple insulated former and electrical connections, used for anti-icing or de-icing, for use in civil aircraft
8516.80.2020
Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides
8516.80.2090
Other
8516.80.8000
Other
8516.90.0000
Parts
8516.90.0010
For heating aircraft and wing surfaces, mounted on propeller aeroplanes, and for use in certain types of aircraft
8516.90.0051
Other
8516.90.0060
Ventilation sub-assembly of an electric deep-fat fryer: - fitted with a motor having a power rating of 8 W at 4 600 rpm, - governed by an electronic circuit, - operating at ambient temperatures above 110 degree C, - fitted with a thermoregulator
8516.90.0070
Inner pot - containing side and central openings, - of annealed aluminium, - with a ceramic coating, heat resistant to more than 200 degree C for use in the manufacture of an electric fryer
8516.90.0080
Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 6080
8516.90.0099
Other
8517.00.0000
Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a lo
Show details
8517.10.0000
Telephone sets, including telephones for cellular networks or for other wireless networks
8517.11.0000
Line telephone sets with cordless handsets
8517.13.0000
Smartphones
8517.14.0000
Other telephones for cellular networks or for other wireless networks
8517.18.0000
Other
8517.60.0000
Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network)
8517.61.0000
Base stations
8517.62.0000
Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus
8517.69.0000
Other
8517.69.1000
Videophones
8517.69.2000
Entry-phone systems
8517.69.3000
Reception apparatus for radio-telephony or radio-telegraphy
8517.69.9000
Other
8517.70.0000
Parts
8517.71.0000
Aerials and aerial reflectors of all kinds; parts suitable for use therewith
8517.79.0000
Other
8518.00.0000
Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone andone or more loudspeakers; audio-frequency electric ampli
Show details
8518.10.0000
Microphones and stands therefor
8518.10.0010
For use in civil aircraft
8518.10.0090
Other
8518.10.3000
Microphones having a frequency range of 300 Hz to 3,4 kHz, of a diameter not exceeding 10 mm and a height not exceeding 3 mm, of a kind used for telecommunications
8518.10.9500
Other
8518.21.0000
Loudspeakers, whether or not mounted in their enclosures
8518.22.0000
Multiple loudspeakers, mounted in the same enclosure
8518.22.0010
For use in civil aircraft
8518.22.0090
Other
8518.29.0000
Other
8518.29.0010
For use in civil aircraft
8518.29.0090
Other
8518.29.3000
Loudspeakers having a frequency range of 300 Hz to 3,4 kHz, of a diameter not exceeding 50 mm, of a kind used for telecommunications
8518.29.9500
Other
8518.30.0000
Headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers
8518.30.0010
For use in civil aircraft
8518.30.0090
Other
8518.30.9500
Other
8518.40.0000
Audio-frequency electric amplifiers
8518.40.0010
For use in civil aircraft
8518.40.0090
Other
8518.50.0000
Electric sound amplifier sets
8518.50.0010
For use in civil aircraft
8518.50.0090
Other
8518.90.0000
Parts
8519.00.0000
Sound recording or sound reproducing apparatus
Show details
8519.20.0000
Apparatus operated by coins, banknotes, bank cards, tokens or by other means of payment
8519.20.1000
Coin- or disc-operated record-players
8519.20.9100
Other
8519.20.9900
Other
8519.20.9910
Music reproducers and automatic announcers, for use in certain types of aircraft
8519.20.9990
Other
8519.30.0000
Turntables (record-decks)
8519.81.0000
Other apparatus
8519.81.0010
For use in civil aircraft
8519.81.0090
Other
8519.89.0000
Other
8521.00.0000
Video recording or reproducing apparatus, whether or not incorporating a video tuner
Show details
8521.10.0000
Magnetic tape-type
8521.10.2000
Using tape of a width not exceeding 1,3 cm and allowing recording or reproduction at a tape speed not exceeding 50 mm per second
8521.10.9500
Other
8521.10.9510
For use in civil aircraft
8521.10.9590
Other
8521.90.0000
Other